CreatBot D1000 Pro HS – Industrial Large-Format 3D Printer (1050×1050×1050 mm)

    From €48.676,66Tax included
    Request a Quote →
    Industrial large-format FDM 3D printer

    CreatBot D1000 Pro HS

    1050 × 1050 × 1050 mm single-nozzle build volume, 420 °C dual nozzles, a heated chamber up to 80 °C and up to 600 mm/s for engineering and carbon-fibre filaments.

    An industrial 3D printer differs from a desktop machine in three ways that matter for functional parts: a hot end that reaches engineering temperatures, an actively heated chamber that stops large parts warping and cracking, and a frame built to run for days. The CreatBot D1000 Pro HS has all three. With more than a metre in every direction, an 80 °C chamber and quad Z-axis, it prints full-size engineering parts that no other machine in our range can.

    CreatBot (Henan Creatbot Technology, Zhengzhou, China) designs and manufactures the D1000 Pro HS. Eolas Prints, in Reocín, Cantabria (Spain), supplies it together with the 1.75 mm engineering filaments it prints.

    1050×1050×1050build volume (mm)
    420 °Cdual nozzles
    80 °Cheated chamber
    600 mm/smax print speed
    90 mm³/smax volumetric flow

    What makes the D1000 Pro HS different

    🔥

    420 °C dual nozzles

    Prints PC, nylon and carbon- or glass-filled PA, PET, PP and PPS. The idle nozzle lifts automatically and a shutter seals it, so it does not ooze onto the part.

    🌡️

    80 °C heated chamber

    An actively heated, insulated chamber keeps large ABS, ASA, PC and nylon parts from warping and delaminating. HEPA and activated-carbon filters clean the exhaust air.

    🔁

    Backup-nozzle switching

    If one nozzle runs out of filament or clogs during a long job, the printer can switch to the second nozzle and carry on, which protects multi-day prints.

    📐

    Eddy-current levelling and camera calibration

    An eddy-current sensor maps the bed and a camera measures the XY offset between the two nozzles, so dual-material and support prints line up without manual tuning.

    💧

    Built-in filament dry room

    Spools sit in a heated dry room (0–70 °C) that keeps nylon, PC and other moisture-sensitive filaments dry during long prints.

    Full specification

    Specification D1000 Pro HS
    Printing technology FDM, dual-nozzle, fully enclosed with actively heated chamber
    Build volume Single nozzle: 1050 × 1050 × 1050 mm; dual nozzle: 990 × 1000 × 1000 mm
    Extruder Dual direct-drive hot ends with automatic nozzle lifting, nozzle shutter and backup-nozzle switching
    Nozzle diameter 0.4 mm standard; 0.3–1.0 mm optional
    Filament diameter 1.75 mm
    Max nozzle temperature 420 °C
    Heated bed Up to 120 °C
    Chamber Actively heated, up to 80 °C
    Print speed Up to 600 mm/s
    Max volumetric flow 90 mm³/s
    Bed levelling Eddy-current auto-levelling; camera-assisted XY nozzle offset calibration
    Motion system Quad Z-axis
    Air filtration HEPA + activated-carbon filter
    Filament storage Filament dry room, 0–70 °C
    Screen 10" touchscreen
    Connectivity USB, Wi-Fi, LAN (Ethernet)
    Software and firmware Klipper firmware; CreatWare, Orca Slicer, Cura
    Power 6000 W printer + 6000 W chamber heating, 220–240 V
    Machine size 1870 × 1430 × 1940 mm
    Weight 675 kg net, 892 kg packed
    Supported materials PLA, ABS, ASA, PETG, PC, PP, PA (nylon), TPU, PC-ABS, PA-ABS, ABS-CF, PC-CF, PET-CF, PET-GF, PA-CF, PA-GF, PP-CF, PP-GF, UltraPA-CF, PPS-CF

    Source: CreatBot D1000 Pro HS product page and specification table (creatbot.com, November 2026). Dual-nozzle printing reduces the X width of the build volume as shown.

    Materials and Eolas filaments

    CreatBot lists PLA, ABS, ASA, PETG, PC, PP, PA (nylon), TPU, PC-ABS, PA-ABS, ABS-CF, PC-CF, PET-CF, PET-GF, PA-CF, PA-GF, PP-CF, PP-GF, UltraPA-CF, PPS-CF for the D1000 Pro HS.

    For everyday prototypes and fixtures, Eolas Prints supplies 1.75 mm ABS, ASA, PETG, PLA and TPU 93A filament. For carbon-fibre or high-temperature grades, ask us about availability.

    Who it's for

    • Manufacturers and engineering teams printing jigs, fixtures, end-use parts and functional prototypes in engineering plastics
    • Automotive, motorsport and drone builders who need large carbon-fibre-reinforced parts
    • Mould, pattern and tooling makers printing large patterns and moulds in heat-resistant materials
    • Universities, R&D centres and service bureaus that run long, unattended jobs

    Questions about the D1000 Pro HS

    How big can the CreatBot D1000 Pro HS print?

    1050 × 1050 × 1050 mm with one nozzle, or 990 × 1000 × 1000 mm when printing with both nozzles.

    Which materials can the D1000 Pro HS print?

    With 420 °C nozzles and a heated chamber, it prints PLA, ABS, ASA, PETG, PC, PP, nylon, TPU and fibre-filled grades such as PA-CF, PET-CF, PP-GF and PPS-CF. For PEEK and PEI (ULTEM), CreatBot makes separate PEEK-series printers.

    What power supply does the D1000 Pro HS need?

    CreatBot specifies 6000 W printer + 6000 W chamber heating, 220–240 V. Check your site supply before ordering.

    How is the D1000 Pro HS delivered?

    As a complete machine on a pallet by freight; CreatBot gives 675 kg net and 892 kg packed. Outside the EU we ship DAP, so the recipient pays duties and import taxes.

    Buying from Eolas Prints

    Eolas Prints, based in Cantabria, Spain, supplies CreatBot printers and ships worldwide. The D1000 Pro HS is covered by the CreatBot manufacturer's warranty, and the current lead time is shown next to the price. It travels as pallet freight; outside the EU we ship DAP, so duties and import taxes are paid by the recipient.

    Request a quote: freight, installation and training are quoted per project. Contact us with your delivery country and application and we will prepare a full quotation.

    Recommendations