Your cart
Your cart is empty
Continue shopping
Bambu Lab H3C – 9-Material Tool-Changer 3D Printer
Bambu Lab
SKU: BLB-H3C-C-3D-PRN
Lead Times: 5 - 6 weeks depending on availability.
Increments of 1
Minimum of 1
Maximum of
Sale price
$4,561.00 AUD
-100%
Regular price
Regular price
$4,561.00 AUD
Unit price
per
Tax included.
Shipping calculated at checkout.
🌍
Worldwide shipping via UPS
Shipping is calculated automatically at checkout from your delivery address and live UPS rates — you'll see the exact cost before you pay.
Customs & Duties: Not included. Our partner UPS contacts you directly to handle clearance and collect any local taxes or duties on delivery ouside the European Union.
Bambu Lab H3C – 9-Material Tool-Changer 3D Printer
Sale price
$4,561.00 AUD
Regular price
Regular price
$4,561.00 AUD
Unit price
per
Couldn't load pickup availability
Spain: Electronic invoicing options available via FACe. Please contact us.
EU VAT Exempt: No VAT on all EU B2B orders. Please contact us.
Training: We offer both online and in-person training options. Please contact us for details
Have a question?
Description
9-material tool-changer 3D printer
Bambu Lab H3C
Nine PrintTools, each with its own nozzle and filament, switching material in about 6 seconds with almost no purge. Sealed AMS 3H storage and drying built in.
The Bambu Lab H3C is Bambu Lab's first tool-changing 3D printer. Instead of cutting, reloading and purging one nozzle at every colour change, it docks 9 PrintTools, each with its own nozzle, heater and filament path, and picks up whichever one the print needs.
Because the next tool is already loaded and pre-heated, a material switch takes about 6 seconds and wastes around 38 mg of filament. It prints a 330 × 320 × 325 mm volume in a 65 °C actively heated chamber, and the included AMS 3H keeps all nine spools sealed on top of the machine with a built-in 85 °C dryer.
9PrintTools
≈6 sper material switch
≈38 mgpurge per change
330×320×325build volume (mm)
65 °Cactive chamber
What makes the H3C different
🔁
SwapTek™ nine-tool switching
Nine docked PrintTools instead of one nozzle. Five can mix CMYKW PLA Palette into full colour while the others carry supports, silk, wood-fill or flexible materials in the same print.
⚡
Active Pre-Heat
The next tool warms up while the current one is still printing, so a switch takes about 6 seconds (3.4 s for the tool change itself) and purges around 38 mg.
🧵
Soft TPU with FlexFeed
A dedicated PrintTool takes 2.85 mm flexible filament from a bypass slot and prints TPU as soft as 75A at up to 3× the flow of Bambu Lab's previous generation.
💧
AMS 3H: store, feed, dry
Nine sealed, RFID-tracked slots sit on top of the printer. Two double as an 85 °C dryer for PA, PC, PET and carbon-fibre filaments, even during a print.
🌡️
Built for engineering materials
Hardened-steel 350 °C nozzles, a 120 °C bed, a 65 °C chamber and H11 HEPA plus activated-carbon filtration for PA, PC, PPS and fibre-filled grades.
✂️
More than printing
Optional CraftTools (CutTool, DrawTool, DebossTool) dock like PrintTools, so one job can print, cut, draw and deboss without manual changes.
AMS 3H Combo or Full Combo
Both versions include the H3C, the AMS 3H and all nine PrintTools, ready for multi-material printing. The AMS 3H Combo is the printer on its own; filament is sold separately.
The Full Combo adds Bambu PLA Palette CMYKW, a spool of TPU 75A black and the Bambu Station L FRAME Edition, a steel stand rated for about 90 kg that brings the 1 m-tall H3C to working height. With the AMS 3H fitted, allow about 1,306 mm of height so the lid can open.
Comparing tool changers? See the Bambu Lab H2C with Vortek hotend change and the Prusa CORE One L+ INDX.
Full specification
| Specification | Bambu Lab H3C |
|---|---|
| Printer type | Enclosed FFF tool changer with Bambu Lab SwapTek™ 9-tool switching |
| PrintTools | 9: eight 0.4 mm for 1.75 mm filament, one 0.4 mm for 2.85 mm flexible filament |
| Material switch | About 6 s; tool change 3.4 s; around 0.038 g purge |
| Nozzles | Hardened steel, up to 350 °C |
| Supported nozzle sizes | 0.2, 0.4, 0.6, 0.8 mm |
| Build volume | 330 × 320 × 325 mm |
| Heatbed | Up to 120 °C; textured PEI plate included; Cool Plate SuperTack and Engineering Plate supported |
| Chamber | Actively heated up to 65 °C; H11 HEPA and activated-carbon filtration |
| Speed | 1,400 mm/s travel, 25,000 mm/s² acceleration, 40 mm³/s max flow |
| AMS 3H | 9 sealed slots, RFID, auto-loading, 2-slot dryer up to 85 °C |
| Filament | 1.75 mm; 2.85 mm through the bypass feed (flexible) |
| Cameras | 1080p live-view and toolhead cameras; BirdsEye camera optional |
| Screen and storage | 5-inch 854 × 480 touchscreen, 64 GB eMMC, USB |
| Connectivity | Wi-Fi 6 (2.4/5 GHz), Bambu Studio and Bambu Handy; no Ethernet |
| Power | 200–240 V AC, max 2250 W at 220 V; 1050 W Low Power Mode |
| Size | 493 × 571 × 1016 mm with AMS 3H (W × D × H) |
| Installation space | 593 × 1056 × 1306 mm (lid open) |
| Weight | 36.28 kg with AMS 3H |
| Warranty | 2 years in the EU |
Materials
The H3C prints PLA, PETG, PCTG, TPU, EVA, PE, PP, PHA, PVA, BVOH, ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA and PPS, plus carbon- and glass-fibre reinforced grades. Each material keeps its own nozzle and temperature, so you can pair PLA with soluble PVA or BVOH supports, PETG with TPU hinges, or PA-CF with flexible TPU joints in one print.
The 65 °C chamber and the 85 °C dryer in the AMS 3H are what make engineering filaments practical: PA, PC and PET stay dry in the sealed slots, and large parts print without warping.
Filament shown in Bambu Lab's product photos is sold separately. The AMS 3H Combo includes no filament; the Full Combo includes PLA Palette CMYKW and TPU 75A black.
What's in the box
All versions
- Bambu Lab H3C printer
- AMS 3H
- Nine PrintTools: eight 0.4 mm for 1.75 mm filament, one 0.4 mm for 2.85 mm filament
- Textured PEI build plate
- Printer power cord, dryer module power cord and 6-pin Bambu Bus cable
- Accessories box
Full Combo adds
- Bambu PLA Palette CMYKW
- TPU 75A, black
- Bambu Station L FRAME Edition (flat-packed)
Who it's for
- Designers and studios printing full-colour models, signage and products with very little purge waste
- Product developers combining rigid and flexible materials in one print: hinges, grips, soles, straps
- Engineering teams printing PA, PC and carbon-fibre filaments in a heated, filtered chamber
- Print farms and small manufacturers running multi-colour batches where purge towers cost hours and kilos of filament
- Makers and workshops that also want cutting, drawing and debossing from the same machine
Questions about the Bambu Lab H3C
How many materials can the Bambu Lab H3C print at once?
Nine, one per PrintTool. With the optional buffer and up to four existing Bambu Lab AMS units connected to PrintTool 1, a single print can draw on up to 24 spools.
How is the H3C different from an AMS printer like the H2D or P2S?
AMS printers feed several filaments through one nozzle, so every change means cutting, unloading, loading and purging. The H3C gives every material its own pre-heated nozzle, so a switch takes about 6 seconds and purges around 38 mg instead of building a large purge tower.
How does the H3C compare with the Prusa CORE One INDX?
Both are tool changers with one nozzle per material. The H3C has 9 tools, switches in about 6 seconds, reaches 350 °C with a 65 °C chamber, and includes the AMS 3H for sealed storage and drying. The Prusa CORE One L+ INDX has up to 8 tools with about 12-second changes and 0.013 g of waste, 300 °C nozzles and a 60 °C chamber, and is built by Prusa in the EU.
Does the H3C print soft TPU?
Yes. A dedicated PrintTool takes 2.85 mm TPU from a bypass slot and prints material as soft as 75A at up to 3× the flow rate of Bambu Lab's previous generation.
Is the H3C replacing the H2C?
No. Bambu Lab keeps both. The H2C pairs many materials with different nozzle sizes through its Vortek hotend change; the H3C is faster and wastes less for multi-colour and multi-material printing.
How much space does the H3C need?
It stands 1,016 mm tall with the AMS 3H fitted and weighs 36.28 kg. Bambu Lab recommends 593 × 1056 × 1306 mm of installation space so the AMS 3H lid can open fully. The Full Combo includes the Bambu Station L FRAME stand.
Does it run on a normal wall socket?
Yes. In Spain and the rest of the EU it runs on 200–240 V. It draws up to 2250 W for about 3–5 minutes while heating the bed; on circuits with limited capacity, Low Power Mode caps it at 1050 W.
Can it print carbon fibre and other abrasive filaments?
Yes. All nine PrintTools have hardened-steel nozzles and extruder gears rated to 350 °C, and the AMS 3H dryer keeps fibre-filled PA and PC dry before they reach the nozzle.
Buying from Eolas Prints
Eolas Prints is an authorised Bambu Lab reseller based in Cantabria, Spain, shipping across Spain and the EU with a 2-year EU warranty and local support. The H3C ships on a pallet; the current lead time is shown next to the price. Not sure whether the H3C, the H2C or a Prusa INDX suits your work? Ask us before you buy.
Shipping
When do you ship?
We ship Monday to Friday from our warehouse in Cantabria, Spain. In-stock orders placed before the cut-off time ship the same business day. Orders placed after the cut-off, or at the weekend, ship on the next business day.
| Spain & Portugal | Orders placed before 4PM CET ship the same day. |
| Rest of the world | Orders placed before 1PM CET ship the same day. |
Products with a lead time shown on their product page ship as soon as they are available, within the lead time shown.
How do you ship?
Parcels — we ship with GLS within mainland Spain & Portugal and with UPS to the rest of the world. Shipping is calculated at checkout from your delivery address, the weight of your order and live carrier rates, so you see the exact price and delivery options before you pay.
Pallet freight — large and heavy machines, such as CO₂ laser cutters and industrial or large-format printers, ship on a pallet by road or, to islands and overseas destinations, by sea. Orders over 40 kg to mainland Spain & Portugal also ship by pallet. The pallet rate for your destination is shown at checkout, and orders over 150 kg ship on two pallets.
Free shipping
Free standard shipping on filament, pellets and accessories:
- Mainland Spain & Portugal: orders over €100 (GLS)
- Other EU countries: orders over €150 (UPS Standard), excluding Malta and Cyprus
Free shipping does not apply to 3D printers, 3D scanners, laser machines or other equipment, or to the Balearic and Canary Islands, Ceuta, Melilla, the Azores and Madeira.
Parcel delivery times
Business days after dispatch.
| Spain & Portugal |
GLS: Next business day UPS: 1 - 2 business days |
| Rest of Europe |
UPS Standard: 2 - 5 business days UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| North America |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| South America | UPS Worldwide Saver: 2 - 5 business days |
| Middle East |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| Asia | UPS Worldwide Saver: 5 - 7 business days |
| Australia & New Zealand |
UPS Worldwide Saver: 5 - 7 business days UPS Express: 3 - 5 business days (before 2PM) |
Pallet delivery times
Estimated, after dispatch.
| Mainland Spain & Portugal | 2 - 4 business days |
| Balearic Islands | 4 - 7 business days |
| EU mainland | 3 - 7 business days |
| UK, Switzerland & Norway | 5 - 10 business days |
| Islands by sea | 1 - 3 weeks Canary Islands, Ceuta, Melilla, Malta, Cyprus, Iceland, Azores, Madeira, Sardinia, Sicily |
| Rest of the world by sea | 4 - 8 weeks |
Pallet deliveries
- The carrier will contact you to arrange a delivery day, so please give a phone number that will be answered.
- Delivery is to your address at ground level. The pallet is not carried inside or unpacked, so please make sure you can unload it — with a forklift, a pallet truck or enough people. Machines can weigh 70 - 250 kg.
- If your address has restricted access (no truck access, a narrow street, no loading area) or you need a tail-lift, please contact us before ordering.
- Check the pallet before signing. Note any visible damage on the delivery note and send us photos within 24 hours.
- If a delivery fails because no one is available or the address cannot be accessed, redelivery and storage may be charged.
How about taxes & duties?
EU, including mainland Spain and the Balearic Islands: VAT is included in the price you pay at checkout. Nothing further is due on delivery.
Outside the EU VAT area, including the Canary Islands, Ceuta and Melilla: all orders ship on DAP (Delivered at Place) terms. We pay for export clearance and transport to your address. Import duties, import taxes (such as VAT, IGIC or IPSI) and customs clearance fees are not included and are paid by the recipient.
- Parcels: UPS will contact you to arrange payment of any duties and taxes before delivery.
- Pallets: the carrier's agent or a customs broker at destination will contact you. You are responsible for import clearance.
If a shipment is refused or not cleared through customs, the return freight and any costs incurred will be deducted from any refund.
Countries we do not ship to
Due to EU sanctions, we do not ship to Russia or Belarus.
Questions?
Contact us at support@eolasprints.com or +34 942 73 59 55 before ordering if you have any questions about delivery to your address.
Characteristics
-
9 PrintTools
SwapTek™ tool changer
-
6-second switch
Around 38 mg purge per change
-
AMS 3H included
9 sealed slots, 85 °C dryer
-
Soft TPU
75A at up to 3× flow
-
Heated chamber
Active heating up to 65 °C
Specifications
Build volume
330 × 320 × 325 mm
Filament diameter
1.75 mm; 2.85 mm (bypass feed, flexible filament)
Layer Height
Printer dimensions
36.28 kg, 493×571×1016 mm with AMS 3H
Extruder
Nine PrintTools with hardened-steel gears and built-in filament cutters, brushless servo extruder motor
Drive system
Direct extruder
Max nozzle temperature
350 °C
Max heatbed temperature
120 °C
Screen
5-inch 854 × 480 touchscreen
Connectivity
Wi-Fi 6 (2.4/5 GHz), USB, Bambu Bus
Advances sendors
Door sensor, filament run-out sensor, nozzle clumping sensor, filament odometry, power loss recovery; live-view and toolhead cameras, BirdsEye camera optional
Print surface
Textured PEI plate (included); Cool Plate SuperTack and Engineering Plate supported
Bed calibration
Fully automatic, including PrintTool docking and offset calibration
Supported materials
PLA, PETG, PCTG, TPU, EVA, PE, PP, PHA, PVA, BVOH, ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS; carbon/glass-fibre reinforced grades
PSU
200-240 VAC, 50/60 Hz; max 2250 W at 220 V
Features
SwapTek™ 9-tool switching with Active Pre-Heat, FlexFeed 2.85 mm TPU tool, mixed nozzle sizes, active chamber heating to 65 °C, optional CutTool, DrawTool and DebossTool
Bambu Lab H3C – 9-Material Tool-Changer 3D Printer
5 - 6 weeks depending on availability.
Sale price
From $4,561.00
-100%
Regular price
Regular price
From $4,561.00
Unit price
per
Why choose us?
-
Worldwide Shipping
-
Authorised Resellers
-
30 Days Returns Policy
-
Technical Support
-
100% Secure Payments