Bambu studio filament profiles for Eolas Prints filaments

Eolas Prints filament profiles are built into Bambu Studio for every Bambu Lab printer — including the X1C, P1S, A1, A1 Mini, H2D, H2S, X2D, A2L, and all AMS-compatible configurations. Open the Prepare tab, click the Filament dropdown, choose Add, search "Eolas Prints", pick your material and Apply. Our profiles are tuned for consistent, high-quality results across our full material range.

How to Install Eolas Prints Profiles in Bambu Studio

1. Open Bambu Studio
2. Go to Prepare tab
3. Click Filament dropdown and select Add
4. Search for Eolas Prints
5. Select your material and click Apply

Profiles are available for all of our filament materials — no manual entry required.

Available Material Profiles

• PLA 1.75mm and 2.85mm
• High Speed PLA
• PETG 1.75mm and 2.85mm
• PETG UV Resistant
• TPU Flex 93A
• TPU Flex D60 UV
• ABS
• ASA

Tips for Bambu Lab Printers with Eolas Prints Filaments

• AMS users: All Eolas Prints 1.75mm filaments are AMS compatible. Flexible TPU variants (93A, D53) work best in the external spool holder rather than AMS slots.
• LIDAR calibration: Run a full calibration cycle on first use with any new filament colour or material variant.
• Textured PEI plate: Ideal for PLA and PETG. Use cool plate or engineering plate for ABS and ASA.

Need help? Our technical support team is available to assist with print settings for any Eolas Prints material on your Bambu Lab printer.

Frequently Asked Questions

How do I add Eolas Prints profiles in Bambu Studio?

In Bambu Studio, go to the Prepare tab, open the Filament dropdown, click Add, search for "Eolas Prints", select the material you want and click Apply. The profile is then available whenever you print that material.

Are Eolas Prints filaments AMS compatible?

Yes — all Eolas Prints 1.75mm filaments are AMS compatible. For flexible TPU variants (93A, D53) we recommend the external spool holder instead of an AMS slot, as flexibles feed more reliably that way.

Which build plate should I use?

A textured PEI plate is ideal for PLA and PETG. For ABS and ASA, use a cool plate or engineering plate. Always make sure the plate is clean and grease-free for the best first-layer adhesion.

Do I need to calibrate after loading a profile?

On Bambu Lab printers, run the built-in LIDAR calibration cycle on first use with any new colour or material. For finer tuning on any printer, a quick temperature and flow check helps — see our troubleshooting & calibration hub.

About the author
Sergio Peciña is a qualified Electrical & Electronics Engineer and Eolas Prints' Technical Design Engineer, with over 10 years of experience in 3D printing. He founded the maker spaces at the University of La Rioja and IDIVAL Santander. Every Eolas Prints filament is manufactured in-house in Cantabria, Spain, to ISO 9001 and ISO 14001 standards.

Shop the filaments these profiles are made for: PLA | PETG | TPU — ISO-certified, made in Spain. New to dialing in a material? See our troubleshooting & calibration hub.