Your cart (1)
Shipping charges are automatically calculated at checkout. International Duties are not included.
xTool Air Purifier Go for F2
xTool
SKU: XTL-AP-GO-F2-ACC
Increments of 1
Minimum of 1
Maximum of
Low stock
In stock, ready to ship
Sale price
$183.00 USD
-100%
Regular price
Regular price
$183.00 USD
Unit price
per
xTool Air Purifier Go for F2
Sale price
$183.00 USD
Regular price
Regular price
$183.00 USD
Unit price
per
Couldn't load pickup availability
Have a question?
Description
The xTool Air Purifier Go is a pipe-free, backpack-style fume filter made exclusively for the xTool F2. It clips onto the back of the machine, weighs just 1.34 kg and passes smoke through four filtration layers, so you can engrave at a craft fair, a pop-up stand or a home desk without a window or an exhaust hose.
Key Specifications
| Compatible machine | xTool F2 only |
| Filtration | 4 layers: pre-filter, HEPA, modified carbon, HEPA |
| Dimensions | 150 x 150 x 250 mm |
| Weight | 1.34 kg |
| Noise | Below 63 dB |
| Operation | No buttons; powered from the F2 via DC splitter cable; airflow adapts to engraving or cutting |
| Certifications | CE, FCC, RoHS |
| Replacement filter | xTool Filter Kit for Air Purifier Go (sold separately) |
How It Works
Air passes a pre-filter that catches larger particles, a HEPA layer for fine dust and smoke, a modified-carbon layer that absorbs odours, gases and VOCs, and a second HEPA layer before it leaves the unit. There are no buttons: connect it to the F2 with the supplied DC power splitter cable and it starts with the laser, adjusts airflow automatically to the engraving or cutting job, and keeps running for a few seconds after the laser stops to clear remaining fumes.
Maintenance
To change the filter, switch off and unplug, open the front cover, slide out the used filter and insert a new one. For high-frequency daily use, xTool recommends replacing it about every two weeks; avoid materials that generate heavy dust or strong odours to extend its life.
Compatibility
It does not fit the F2 Ultra, F1 or other xTool machines. For a fixed workshop with several lasers, the xTool SafetyPro AP2 offers more capacity.
Who It’s For
- F2 owners personalising at markets, fairs and events
- Home studios without a window for venting
What’s in the Box
- Air Purifier Go
- DC power splitter cable
- G4 filter cotton
- Screws, washers and sealing ring
- Quick start guide and safety instructions
Available from Eolas Prints
Eolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. It is the natural companion to the xTool F2 portable dual laser.
Shipping
When do you ship?
We ship Monday to Friday from our warehouse in Cantabria, Spain. In-stock orders placed before the cut-off time ship the same business day. Orders placed after the cut-off, or at the weekend, ship on the next business day.
| Spain & Portugal | Orders placed before 4PM CET ship the same day. |
| Rest of the world | Orders placed before 1PM CET ship the same day. |
Products with a lead time shown on their product page ship as soon as they are available, within the lead time shown.
How do you ship?
Parcels — we ship with GLS within mainland Spain & Portugal and with UPS to the rest of the world. Shipping is calculated at checkout from your delivery address, the weight of your order and live carrier rates, so you see the exact price and delivery options before you pay.
Pallet freight — large and heavy machines, such as CO₂ laser cutters and industrial or large-format printers, ship on a pallet by road or, to islands and overseas destinations, by sea. Orders over 40 kg to mainland Spain & Portugal also ship by pallet. The pallet rate for your destination is shown at checkout, and orders over 150 kg ship on two pallets.
Free shipping
Free standard shipping on filament, pellets and accessories:
- Mainland Spain & Portugal: orders over €100 (GLS)
- Other EU countries: orders over €150 (UPS Standard), excluding Malta and Cyprus
Free shipping does not apply to 3D printers, 3D scanners, laser machines or other equipment, or to the Balearic and Canary Islands, Ceuta, Melilla, the Azores and Madeira.
Parcel delivery times
Business days after dispatch.
| Spain & Portugal |
GLS: Next business day UPS: 1 - 2 business days |
| Rest of Europe |
UPS Standard: 2 - 5 business days UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| North America |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| South America | UPS Worldwide Saver: 2 - 5 business days |
| Middle East |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| Asia | UPS Worldwide Saver: 5 - 7 business days |
| Australia & New Zealand |
UPS Worldwide Saver: 5 - 7 business days UPS Express: 3 - 5 business days (before 2PM) |
Pallet delivery times
Estimated, after dispatch.
| Mainland Spain & Portugal | 2 - 4 business days |
| Balearic Islands | 4 - 7 business days |
| EU mainland | 3 - 7 business days |
| UK, Switzerland & Norway | 5 - 10 business days |
| Islands by sea | 1 - 3 weeks Canary Islands, Ceuta, Melilla, Malta, Cyprus, Iceland, Azores, Madeira, Sardinia, Sicily |
| Rest of the world by sea | 4 - 8 weeks |
Pallet deliveries
- The carrier will contact you to arrange a delivery day, so please give a phone number that will be answered.
- Delivery is to your address at ground level. The pallet is not carried inside or unpacked, so please make sure you can unload it — with a forklift, a pallet truck or enough people. Machines can weigh 70 - 250 kg.
- If your address has restricted access (no truck access, a narrow street, no loading area) or you need a tail-lift, please contact us before ordering.
- Check the pallet before signing. Note any visible damage on the delivery note and send us photos within 24 hours.
- If a delivery fails because no one is available or the address cannot be accessed, redelivery and storage may be charged.
How about taxes & duties?
EU, including mainland Spain and the Balearic Islands: VAT is included in the price you pay at checkout. Nothing further is due on delivery.
Outside the EU VAT area, including the Canary Islands, Ceuta and Melilla: all orders ship on DAP (Delivered at Place) terms. We pay for export clearance and transport to your address. Import duties, import taxes (such as VAT, IGIC or IPSI) and customs clearance fees are not included and are paid by the recipient.
- Parcels: UPS will contact you to arrange payment of any duties and taxes before delivery.
- Pallets: the carrier's agent or a customs broker at destination will contact you. You are responsible for import clearance.
If a shipment is refused or not cleared through customs, the return freight and any costs incurred will be deducted from any refund.
Countries we do not ship to
Due to EU sanctions, we do not ship to Russia or Belarus.
Questions?
Contact us at support@eolasprints.com or +34 942 73 59 55 before ordering if you have any questions about delivery to your address.
The xTool Air Purifier Go is a pipe-free, backpack-style fume filter made exclusively for the xTool F2. It clips onto the back of the machine, weighs just 1.34 kg and passes smoke through four filtration layers, so you can engrave at a craft fair, a pop-up stand or a home desk without a window or an exhaust hose.
Key Specifications
| Compatible machine | xTool F2 only |
| Filtration | 4 layers: pre-filter, HEPA, modified carbon, HEPA |
| Dimensions | 150 x 150 x 250 mm |
| Weight | 1.34 kg |
| Noise | Below 63 dB |
| Operation | No buttons; powered from the F2 via DC splitter cable; airflow adapts to engraving or cutting |
| Certifications | CE, FCC, RoHS |
| Replacement filter | xTool Filter Kit for Air Purifier Go (sold separately) |
How It Works
Air passes a pre-filter that catches larger particles, a HEPA layer for fine dust and smoke, a modified-carbon layer that absorbs odours, gases and VOCs, and a second HEPA layer before it leaves the unit. There are no buttons: connect it to the F2 with the supplied DC power splitter cable and it starts with the laser, adjusts airflow automatically to the engraving or cutting job, and keeps running for a few seconds after the laser stops to clear remaining fumes.
Maintenance
To change the filter, switch off and unplug, open the front cover, slide out the used filter and insert a new one. For high-frequency daily use, xTool recommends replacing it about every two weeks; avoid materials that generate heavy dust or strong odours to extend its life.
Compatibility
It does not fit the F2 Ultra, F1 or other xTool machines. For a fixed workshop with several lasers, the xTool SafetyPro AP2 offers more capacity.
Who It’s For
- F2 owners personalising at markets, fairs and events
- Home studios without a window for venting
What’s in the Box
- Air Purifier Go
- DC power splitter cable
- G4 filter cotton
- Screws, washers and sealing ring
- Quick start guide and safety instructions
Available from Eolas Prints
Eolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. It is the natural companion to the xTool F2 portable dual laser.