Your cart (1)
Shipping charges are automatically calculated at checkout. International Duties are not included.
xTool SafetyPro IF2 2.0 Inline Duct Fan
xTool
SKU: XTL-IF2-2-ACC
Increments of 1
Minimum of 1
Maximum of
Low stock
In stock, ready to ship
Sale price
910,00 PLN
-100%
Regular price
Regular price
910,00 PLN
Unit price
per
Tax included.
Shipping calculated at checkout.
xTool SafetyPro IF2 2.0 Inline Duct Fan
Sale price
910,00 PLN
Regular price
Regular price
910,00 PLN
Unit price
per
Couldn't load pickup availability
Have a question?
Description
The xTool SafetyPro IF2 2.0 is a compact inline duct fan that pulls laser smoke out of the machine and vents it outdoors. Two fans spinning at 14,000 RPM, driven by a 55 W brushless motor, deliver 1300 Pa of suction in a housing of just 182 x 125 x 129 mm – around 5.5 times smaller than a traditional inline fan – and it switches on and off with your xTool laser.
Key Specifications
| Airflow | 140 CFM |
| Suction power | 1300 Pa |
| Motor | 55 W brushless, dual fans at 14,000 RPM each |
| Fan speed settings | 4 speeds |
| Intelligent control | Yes – auto start/stop with supported xTool lasers |
| Duct diameter | 3 inch (76 mm) |
| Product size | 182 x 125 x 129 mm |
| Product weight | 1.15 kg |
How It Works
Fit the IF2 2.0 between the laser’s 3-inch exhaust port and a duct leading outside. On supported machines it starts and stops automatically with the job, you can set a delay so it keeps running after the laser stops, and it selects a suitable ventilation mode from the material chosen in the software. Four manual speed settings are available on every machine. Noise-reducing cotton inside the housing keeps operation quieter, and the fan detaches easily and can be rinsed with water for cleaning. The 2.3 m PP duct folds freely, so the laser does not have to sit next to a window.
Duct Fan or Air Purifier?
The IF2 2.0 is the right choice when you can vent outdoors: it removes smoke rather than filtering it, with no filters to replace. If you cannot vent outside, choose a filtering unit such as the xTool SafetyPro AP2 instead.
Compatibility
Manual and automatic modes:
- xTool P3
- xTool P2S
- xTool F2
- xTool F1 Ultra
- xTool F2 Ultra (both versions)
- xTool F2 Ultra UV
- xTool S1
- xTool M1 Ultra
- xTool OS1 Automatic Shaker Oven
Manual mode only:
Who It’s For
- CO2 and diode laser users with a window or wall vent
- Workshops and classrooms short on floor space
Available from Eolas Prints
Eolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. It is an efficient extraction upgrade for the xTool P3 80W CO2 laser cutter.
Shipping
When do you ship?
We ship Monday to Friday from our warehouse in Cantabria, Spain. In-stock orders placed before the cut-off time ship the same business day. Orders placed after the cut-off, or at the weekend, ship on the next business day.
| Spain & Portugal | Orders placed before 4PM CET ship the same day. |
| Rest of the world | Orders placed before 1PM CET ship the same day. |
Products with a lead time shown on their product page ship as soon as they are available, within the lead time shown.
How do you ship?
Parcels — we ship with GLS within mainland Spain & Portugal and with UPS to the rest of the world. Shipping is calculated at checkout from your delivery address, the weight of your order and live carrier rates, so you see the exact price and delivery options before you pay.
Pallet freight — large and heavy machines, such as CO₂ laser cutters and industrial or large-format printers, ship on a pallet by road or, to islands and overseas destinations, by sea. Orders over 40 kg to mainland Spain & Portugal also ship by pallet. The pallet rate for your destination is shown at checkout, and orders over 150 kg ship on two pallets.
Free shipping
Free standard shipping on filament, pellets and accessories:
- Mainland Spain & Portugal: orders over €100 (GLS)
- Other EU countries: orders over €150 (UPS Standard), excluding Malta and Cyprus
Free shipping does not apply to 3D printers, 3D scanners, laser machines or other equipment, or to the Balearic and Canary Islands, Ceuta, Melilla, the Azores and Madeira.
Parcel delivery times
Business days after dispatch.
| Spain & Portugal |
GLS: Next business day UPS: 1 - 2 business days |
| Rest of Europe |
UPS Standard: 2 - 5 business days UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| North America |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| South America | UPS Worldwide Saver: 2 - 5 business days |
| Middle East |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| Asia | UPS Worldwide Saver: 5 - 7 business days |
| Australia & New Zealand |
UPS Worldwide Saver: 5 - 7 business days UPS Express: 3 - 5 business days (before 2PM) |
Pallet delivery times
Estimated, after dispatch.
| Mainland Spain & Portugal | 2 - 4 business days |
| Balearic Islands | 4 - 7 business days |
| EU mainland | 3 - 7 business days |
| UK, Switzerland & Norway | 5 - 10 business days |
| Islands by sea | 1 - 3 weeks Canary Islands, Ceuta, Melilla, Malta, Cyprus, Iceland, Azores, Madeira, Sardinia, Sicily |
| Rest of the world by sea | 4 - 8 weeks |
Pallet deliveries
- The carrier will contact you to arrange a delivery day, so please give a phone number that will be answered.
- Delivery is to your address at ground level. The pallet is not carried inside or unpacked, so please make sure you can unload it — with a forklift, a pallet truck or enough people. Machines can weigh 70 - 250 kg.
- If your address has restricted access (no truck access, a narrow street, no loading area) or you need a tail-lift, please contact us before ordering.
- Check the pallet before signing. Note any visible damage on the delivery note and send us photos within 24 hours.
- If a delivery fails because no one is available or the address cannot be accessed, redelivery and storage may be charged.
How about taxes & duties?
EU, including mainland Spain and the Balearic Islands: VAT is included in the price you pay at checkout. Nothing further is due on delivery.
Outside the EU VAT area, including the Canary Islands, Ceuta and Melilla: all orders ship on DAP (Delivered at Place) terms. We pay for export clearance and transport to your address. Import duties, import taxes (such as VAT, IGIC or IPSI) and customs clearance fees are not included and are paid by the recipient.
- Parcels: UPS will contact you to arrange payment of any duties and taxes before delivery.
- Pallets: the carrier's agent or a customs broker at destination will contact you. You are responsible for import clearance.
If a shipment is refused or not cleared through customs, the return freight and any costs incurred will be deducted from any refund.
Countries we do not ship to
Due to EU sanctions, we do not ship to Russia or Belarus.
Questions?
Contact us at support@eolasprints.com or +34 942 73 59 55 before ordering if you have any questions about delivery to your address.
The xTool SafetyPro IF2 2.0 is a compact inline duct fan that pulls laser smoke out of the machine and vents it outdoors. Two fans spinning at 14,000 RPM, driven by a 55 W brushless motor, deliver 1300 Pa of suction in a housing of just 182 x 125 x 129 mm – around 5.5 times smaller than a traditional inline fan – and it switches on and off with your xTool laser.
Key Specifications
| Airflow | 140 CFM |
| Suction power | 1300 Pa |
| Motor | 55 W brushless, dual fans at 14,000 RPM each |
| Fan speed settings | 4 speeds |
| Intelligent control | Yes – auto start/stop with supported xTool lasers |
| Duct diameter | 3 inch (76 mm) |
| Product size | 182 x 125 x 129 mm |
| Product weight | 1.15 kg |
How It Works
Fit the IF2 2.0 between the laser’s 3-inch exhaust port and a duct leading outside. On supported machines it starts and stops automatically with the job, you can set a delay so it keeps running after the laser stops, and it selects a suitable ventilation mode from the material chosen in the software. Four manual speed settings are available on every machine. Noise-reducing cotton inside the housing keeps operation quieter, and the fan detaches easily and can be rinsed with water for cleaning. The 2.3 m PP duct folds freely, so the laser does not have to sit next to a window.
Duct Fan or Air Purifier?
The IF2 2.0 is the right choice when you can vent outdoors: it removes smoke rather than filtering it, with no filters to replace. If you cannot vent outside, choose a filtering unit such as the xTool SafetyPro AP2 instead.
Compatibility
Manual and automatic modes:
- xTool P3
- xTool P2S
- xTool F2
- xTool F1 Ultra
- xTool F2 Ultra (both versions)
- xTool F2 Ultra UV
- xTool S1
- xTool M1 Ultra
- xTool OS1 Automatic Shaker Oven
Manual mode only:
Who It’s For
- CO2 and diode laser users with a window or wall vent
- Workshops and classrooms short on floor space
Available from Eolas Prints
Eolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. It is an efficient extraction upgrade for the xTool P3 80W CO2 laser cutter.