CreatBot D1000 Pro HS – Industrial Large-Format 3D Printer (1050×1050×1050 mm)
Have a question?
CreatBot D1000 Pro HS
1050 × 1050 × 1050 mm single-nozzle build volume, 420 °C dual nozzles, a heated chamber up to 80 °C and up to 600 mm/s for engineering and carbon-fibre filaments.
An industrial 3D printer differs from a desktop machine in three ways that matter for functional parts: a hot end that reaches engineering temperatures, an actively heated chamber that stops large parts warping and cracking, and a frame built to run for days. The CreatBot D1000 Pro HS has all three. With more than a metre in every direction, an 80 °C chamber and quad Z-axis, it prints full-size engineering parts that no other machine in our range can.
CreatBot (Henan Creatbot Technology, Zhengzhou, China) designs and manufactures the D1000 Pro HS. Eolas Prints, in Reocín, Cantabria (Spain), supplies it together with the 1.75 mm engineering filaments it prints.
What makes the D1000 Pro HS different
420 °C dual nozzles
Prints PC, nylon and carbon- or glass-filled PA, PET, PP and PPS. The idle nozzle lifts automatically and a shutter seals it, so it does not ooze onto the part.
80 °C heated chamber
An actively heated, insulated chamber keeps large ABS, ASA, PC and nylon parts from warping and delaminating. HEPA and activated-carbon filters clean the exhaust air.
Backup-nozzle switching
If one nozzle runs out of filament or clogs during a long job, the printer can switch to the second nozzle and carry on, which protects multi-day prints.
Eddy-current levelling and camera calibration
An eddy-current sensor maps the bed and a camera measures the XY offset between the two nozzles, so dual-material and support prints line up without manual tuning.
Built-in filament dry room
Spools sit in a heated dry room (0–70 °C) that keeps nylon, PC and other moisture-sensitive filaments dry during long prints.
Full specification
| Specification | D1000 Pro HS |
|---|---|
| Printing technology | FDM, dual-nozzle, fully enclosed with actively heated chamber |
| Build volume | Single nozzle: 1050 × 1050 × 1050 mm; dual nozzle: 990 × 1000 × 1000 mm |
| Extruder | Dual direct-drive hot ends with automatic nozzle lifting, nozzle shutter and backup-nozzle switching |
| Nozzle diameter | 0.4 mm standard; 0.3–1.0 mm optional |
| Filament diameter | 1.75 mm |
| Max nozzle temperature | 420 °C |
| Heated bed | Up to 120 °C |
| Chamber | Actively heated, up to 80 °C |
| Print speed | Up to 600 mm/s |
| Max volumetric flow | 90 mm³/s |
| Bed levelling | Eddy-current auto-levelling; camera-assisted XY nozzle offset calibration |
| Motion system | Quad Z-axis |
| Air filtration | HEPA + activated-carbon filter |
| Filament storage | Filament dry room, 0–70 °C |
| Screen | 10" touchscreen |
| Connectivity | USB, Wi-Fi, LAN (Ethernet) |
| Software and firmware | Klipper firmware; CreatWare, Orca Slicer, Cura |
| Power | 6000 W printer + 6000 W chamber heating, 220–240 V |
| Machine size | 1870 × 1430 × 1940 mm |
| Weight | 675 kg net, 892 kg packed |
| Supported materials | PLA, ABS, ASA, PETG, PC, PP, PA (nylon), TPU, PC-ABS, PA-ABS, ABS-CF, PC-CF, PET-CF, PET-GF, PA-CF, PA-GF, PP-CF, PP-GF, UltraPA-CF, PPS-CF |
Source: CreatBot D1000 Pro HS product page and specification table (creatbot.com, November 2026). Dual-nozzle printing reduces the X width of the build volume as shown.
Materials and Eolas filaments
CreatBot lists PLA, ABS, ASA, PETG, PC, PP, PA (nylon), TPU, PC-ABS, PA-ABS, ABS-CF, PC-CF, PET-CF, PET-GF, PA-CF, PA-GF, PP-CF, PP-GF, UltraPA-CF, PPS-CF for the D1000 Pro HS.
For everyday prototypes and fixtures, Eolas Prints supplies 1.75 mm ABS, ASA, PETG, PLA and TPU 93A filament. For carbon-fibre or high-temperature grades, ask us about availability.
Who it's for
- Manufacturers and engineering teams printing jigs, fixtures, end-use parts and functional prototypes in engineering plastics
- Automotive, motorsport and drone builders who need large carbon-fibre-reinforced parts
- Mould, pattern and tooling makers printing large patterns and moulds in heat-resistant materials
- Universities, R&D centres and service bureaus that run long, unattended jobs
Questions about the D1000 Pro HS
How big can the CreatBot D1000 Pro HS print?
1050 × 1050 × 1050 mm with one nozzle, or 990 × 1000 × 1000 mm when printing with both nozzles.
Which materials can the D1000 Pro HS print?
With 420 °C nozzles and a heated chamber, it prints PLA, ABS, ASA, PETG, PC, PP, nylon, TPU and fibre-filled grades such as PA-CF, PET-CF, PP-GF and PPS-CF. For PEEK and PEI (ULTEM), CreatBot makes separate PEEK-series printers.
What power supply does the D1000 Pro HS need?
CreatBot specifies 6000 W printer + 6000 W chamber heating, 220–240 V. Check your site supply before ordering.
How is the D1000 Pro HS delivered?
As a complete machine on a pallet by freight; CreatBot gives 675 kg net and 892 kg packed. Outside the EU we ship DAP, so the recipient pays duties and import taxes.
Buying from Eolas Prints
Eolas Prints, based in Cantabria, Spain, supplies CreatBot printers and ships worldwide. The D1000 Pro HS is covered by the CreatBot manufacturer's warranty, and the current lead time is shown next to the price. It travels as pallet freight; outside the EU we ship DAP, so duties and import taxes are paid by the recipient.
Request a quote: freight, installation and training are quoted per project. Contact us with your delivery country and application and we will prepare a full quotation.