Your cart (1)
Shipping charges are automatically calculated at checkout. International Duties are not included.
ELEGOO Mercury Plus V3.0 – Wash & Cure Station
Elegoo
SKU: ELG-MERCV3-ACC
Increments of 1
Minimum of 1
Maximum of
Low stock
In stock, ready to ship
Sale price
CHF 223.00
-100%
Regular price
Regular price
CHF 223.00
Unit price
per
Tax included.
Shipping calculated at checkout.
ELEGOO Mercury Plus V3.0 – Wash & Cure Station
Sale price
CHF 223.00
Regular price
Regular price
CHF 223.00
Unit price
per
Couldn't load pickup availability
Have a question?
Description
2-in-1 Wash & Cure Station
ELEGOO Mercury Plus V3.0
7.5 litre wash capacity and ø250 × 290 mm curing in one unit — sized for build plates up to 10 inches.
A resin printer without a wash and cure station is an incomplete system. Every part comes off the plate coated in uncured resin: it has to be washed in isopropyl alcohol, then UV-cured to reach full hardness and dimensional stability. The Mercury Plus V3.0 does both in one machine — swap the wash bucket for the curing turntable depending on which stage you are at.
It is sized for real plates rather than test prints. 7.5 litres of wash capacity is 114% more than the V2.0, the curing area is 460% larger, and the adjustable brackets take build plates up to 10 inches — which means it fits the whole Saturn 4 range directly, as well as Mars and Jupiter machines.
7.5 LWash capacity
ø250×290Max curing size (mm)
24 × 405nmUV LEDs
10″Max build plate
99.9%UV blocked by cover
What It Does
💧
Two cleaning modes
Basket mode takes parts off the plate for direct washing, up to 230 × 135 × 260 mm. Hanging mode clamps the build plate itself on adjustable brackets, up to 214 × 135 × 180 mm.
🔆
360° curing
A rotating turntable with 24 × 405 nm LEDs, plus reflective mirrors under the transparent platform that bounce light upward — so the underside of a model cures as well as the top.
⚙️
Upgraded POM bearing
Smoother high-speed rotation and stronger agitation in the wash, which removes residual resin from complex geometry more reliably.
🛡️
Anti-UV cover
Blocks 99.9% of ultraviolet light, and a micro switch stops curing the moment the cover is lifted — a genuine eye-safety feature, not a convenience.
⏱️
Touch panel timer
Set wash or cure time up to 30 minutes and track the countdown. As a rule of thumb, parts under 30 mm cure in about 2 minutes; complex geometry needs longer.
🔌
Wide compatibility
Works with LCD, DLP and SLA printers up to 10 inches — the ELEGOO Mars, Saturn and Jupiter series, and most other brands.
Full Specification
| Specification | ELEGOO Mercury Plus V3.0 |
|---|---|
| Function | 2-in-1 washing and curing station |
| Wash capacity | 7.5 litres (114% more than V2.0) |
| Max wash size — basket mode | 230 × 135 × 260 mm |
| Max wash size — hanging mode | 214 × 135 × 180 mm |
| Max curing size | ø250 × 290 mm (H) |
| UV source | 24 × 405 nm LEDs, 360° rotating turntable, reflective mirror design |
| Max build plate | Up to 10 inches (adjustable brackets) |
| Timer | 0 – 30 minutes, touch panel |
| Safety | Anti-UV cover blocking 99.9% UV; micro switch halts curing when cover removed |
| Compatibility | LCD / DLP / SLA printers up to 10″ — ELEGOO Mars, Saturn, Jupiter and most other brands |
To reach the maximum curing volume, use the turntable without the build plate fitted.
Which Wash & Cure Station?
| Mercury Plus V3.0 | Mercury XS Bundle | |
|---|---|---|
| Format | One 2-in-1 unit | Two separate units |
| Wash capacity | 7.5 L | 7 L |
| Max curing | ø250 × 290 mm | ø200 × 260 mm |
| Handheld UV lamp | — | Included |
| Best for | Larger plates, single-bench workflow | Washing and curing in parallel |
Safety & workspace
Uncured photopolymer resin is a skin and eye irritant. Wear nitrile gloves and eye protection when handling liquid resin or used IPA, and work in a ventilated space. Never look directly at 405 nm UV light. Dispose of waste resin and saturated IPA as chemical waste — never down the drain. Keep resin and solvents away from children and pets.
Questions About the Mercury Plus V3.0
Which printers does it fit?
Any LCD, DLP or SLA printer with a build plate up to 10 inches — which covers the whole ELEGOO Mars, Saturn and Jupiter range as well as most other brands. The adjustable brackets are the reason: they clamp the build plate itself over the wash bucket, so you do not have to remove parts before cleaning. If you run a Saturn 4 or Jupiter, this is the station that takes the plate directly.
Basket mode or hanging mode — when do I use each?
Hanging mode clamps the whole build plate with parts still attached, up to 214 × 135 × 180 mm — fastest, and it keeps resin off your hands. Basket mode takes parts off the plate first and washes them loose in the basket, up to 230 × 135 × 260 mm — better for tall models that exceed the hanging height, or for washing a batch of small parts thoroughly.
How much IPA does it need, and how often should it be changed?
The tank holds up to 7.5 litres, though you only need enough to submerge the parts — most users run considerably less. IPA becomes saturated with dissolved resin over time and stops cleaning effectively; when parts come out still tacky after a normal cycle, it needs replacing. Saturated IPA is chemical waste: let the dissolved resin cure out under UV, then dispose of the liquid at a chemical waste facility rather than pouring it away.
Should I choose this or the Mercury XS Bundle?
This one if your plate is large — it takes up to 10 inches directly and cures up to ø250 × 290 mm, the biggest of the two. The XS Bundle if throughput matters more than size: it is two separate machines, so one plate can wash while another cures, and it includes a handheld UV lamp for interiors and recesses. Plate size usually decides it before anything else does.
Does the wash station need ventilation too?
Yes — this is the step people overlook. IPA evaporates as it works and carries dissolved uncured resin with it, so the wash station is a VOC source in its own right, not just the printer. Keep the lid on when it is not in use, run it in the same ventilated space as the printer, and do not wash in a small sealed room.
Buying from Eolas Prints
We are a specialist 3D printing supplier in Cantabria, Spain, shipping across Spain and the EU. We stock resin printing consumables here rather than sourcing them when you need them. Not sure which station fits your printer? Ask us — plate size decides it, and we will tell you straight if the smaller unit is enough.
Shipping
When do you ship?
We ship Monday to Friday from our warehouse in Cantabria, Spain. In-stock orders placed before the cut-off time ship the same business day. Orders placed after the cut-off, or at the weekend, ship on the next business day.
| Spain & Portugal | Orders placed before 4PM CET ship the same day. |
| Rest of the world | Orders placed before 1PM CET ship the same day. |
Products with a lead time shown on their product page ship as soon as they are available, within the lead time shown.
How do you ship?
Parcels — we ship with GLS within mainland Spain & Portugal and with UPS to the rest of the world. Shipping is calculated at checkout from your delivery address, the weight of your order and live carrier rates, so you see the exact price and delivery options before you pay.
Pallet freight — large and heavy machines, such as CO₂ laser cutters and industrial or large-format printers, ship on a pallet by road or, to islands and overseas destinations, by sea. Orders over 40 kg to mainland Spain & Portugal also ship by pallet. The pallet rate for your destination is shown at checkout, and orders over 150 kg ship on two pallets.
Free shipping
Free standard shipping on filament, pellets and accessories:
- Mainland Spain & Portugal: orders over €100 (GLS)
- Other EU countries: orders over €150 (UPS Standard), excluding Malta and Cyprus
Free shipping does not apply to 3D printers, 3D scanners, laser machines or other equipment, or to the Balearic and Canary Islands, Ceuta, Melilla, the Azores and Madeira.
Parcel delivery times
Business days after dispatch.
| Spain & Portugal |
GLS: Next business day UPS: 1 - 2 business days |
| Rest of Europe |
UPS Standard: 2 - 5 business days UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| North America |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| South America | UPS Worldwide Saver: 2 - 5 business days |
| Middle East |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| Asia | UPS Worldwide Saver: 5 - 7 business days |
| Australia & New Zealand |
UPS Worldwide Saver: 5 - 7 business days UPS Express: 3 - 5 business days (before 2PM) |
Pallet delivery times
Estimated, after dispatch.
| Mainland Spain & Portugal | 2 - 4 business days |
| Balearic Islands | 4 - 7 business days |
| EU mainland | 3 - 7 business days |
| UK, Switzerland & Norway | 5 - 10 business days |
| Islands by sea | 1 - 3 weeks Canary Islands, Ceuta, Melilla, Malta, Cyprus, Iceland, Azores, Madeira, Sardinia, Sicily |
| Rest of the world by sea | 4 - 8 weeks |
Pallet deliveries
- The carrier will contact you to arrange a delivery day, so please give a phone number that will be answered.
- Delivery is to your address at ground level. The pallet is not carried inside or unpacked, so please make sure you can unload it — with a forklift, a pallet truck or enough people. Machines can weigh 70 - 250 kg.
- If your address has restricted access (no truck access, a narrow street, no loading area) or you need a tail-lift, please contact us before ordering.
- Check the pallet before signing. Note any visible damage on the delivery note and send us photos within 24 hours.
- If a delivery fails because no one is available or the address cannot be accessed, redelivery and storage may be charged.
How about taxes & duties?
EU, including mainland Spain and the Balearic Islands: VAT is included in the price you pay at checkout. Nothing further is due on delivery.
Outside the EU VAT area, including the Canary Islands, Ceuta and Melilla: all orders ship on DAP (Delivered at Place) terms. We pay for export clearance and transport to your address. Import duties, import taxes (such as VAT, IGIC or IPSI) and customs clearance fees are not included and are paid by the recipient.
- Parcels: UPS will contact you to arrange payment of any duties and taxes before delivery.
- Pallets: the carrier's agent or a customs broker at destination will contact you. You are responsible for import clearance.
If a shipment is refused or not cleared through customs, the return freight and any costs incurred will be deducted from any refund.
Countries we do not ship to
Due to EU sanctions, we do not ship to Russia or Belarus.
Questions?
Contact us at support@eolasprints.com or +34 942 73 59 55 before ordering if you have any questions about delivery to your address.
2-in-1 Wash & Cure Station
ELEGOO Mercury Plus V3.0
7.5 litre wash capacity and ø250 × 290 mm curing in one unit — sized for build plates up to 10 inches.
A resin printer without a wash and cure station is an incomplete system. Every part comes off the plate coated in uncured resin: it has to be washed in isopropyl alcohol, then UV-cured to reach full hardness and dimensional stability. The Mercury Plus V3.0 does both in one machine — swap the wash bucket for the curing turntable depending on which stage you are at.
It is sized for real plates rather than test prints. 7.5 litres of wash capacity is 114% more than the V2.0, the curing area is 460% larger, and the adjustable brackets take build plates up to 10 inches — which means it fits the whole Saturn 4 range directly, as well as Mars and Jupiter machines.
7.5 LWash capacity
ø250×290Max curing size (mm)
24 × 405nmUV LEDs
10″Max build plate
99.9%UV blocked by cover
What It Does
💧
Two cleaning modes
Basket mode takes parts off the plate for direct washing, up to 230 × 135 × 260 mm. Hanging mode clamps the build plate itself on adjustable brackets, up to 214 × 135 × 180 mm.
🔆
360° curing
A rotating turntable with 24 × 405 nm LEDs, plus reflective mirrors under the transparent platform that bounce light upward — so the underside of a model cures as well as the top.
⚙️
Upgraded POM bearing
Smoother high-speed rotation and stronger agitation in the wash, which removes residual resin from complex geometry more reliably.
🛡️
Anti-UV cover
Blocks 99.9% of ultraviolet light, and a micro switch stops curing the moment the cover is lifted — a genuine eye-safety feature, not a convenience.
⏱️
Touch panel timer
Set wash or cure time up to 30 minutes and track the countdown. As a rule of thumb, parts under 30 mm cure in about 2 minutes; complex geometry needs longer.
🔌
Wide compatibility
Works with LCD, DLP and SLA printers up to 10 inches — the ELEGOO Mars, Saturn and Jupiter series, and most other brands.
Full Specification
| Specification | ELEGOO Mercury Plus V3.0 |
|---|---|
| Function | 2-in-1 washing and curing station |
| Wash capacity | 7.5 litres (114% more than V2.0) |
| Max wash size — basket mode | 230 × 135 × 260 mm |
| Max wash size — hanging mode | 214 × 135 × 180 mm |
| Max curing size | ø250 × 290 mm (H) |
| UV source | 24 × 405 nm LEDs, 360° rotating turntable, reflective mirror design |
| Max build plate | Up to 10 inches (adjustable brackets) |
| Timer | 0 – 30 minutes, touch panel |
| Safety | Anti-UV cover blocking 99.9% UV; micro switch halts curing when cover removed |
| Compatibility | LCD / DLP / SLA printers up to 10″ — ELEGOO Mars, Saturn, Jupiter and most other brands |
To reach the maximum curing volume, use the turntable without the build plate fitted.
Which Wash & Cure Station?
| Mercury Plus V3.0 | Mercury XS Bundle | |
|---|---|---|
| Format | One 2-in-1 unit | Two separate units |
| Wash capacity | 7.5 L | 7 L |
| Max curing | ø250 × 290 mm | ø200 × 260 mm |
| Handheld UV lamp | — | Included |
| Best for | Larger plates, single-bench workflow | Washing and curing in parallel |
Safety & workspace
Uncured photopolymer resin is a skin and eye irritant. Wear nitrile gloves and eye protection when handling liquid resin or used IPA, and work in a ventilated space. Never look directly at 405 nm UV light. Dispose of waste resin and saturated IPA as chemical waste — never down the drain. Keep resin and solvents away from children and pets.
Questions About the Mercury Plus V3.0
Which printers does it fit?
Any LCD, DLP or SLA printer with a build plate up to 10 inches — which covers the whole ELEGOO Mars, Saturn and Jupiter range as well as most other brands. The adjustable brackets are the reason: they clamp the build plate itself over the wash bucket, so you do not have to remove parts before cleaning. If you run a Saturn 4 or Jupiter, this is the station that takes the plate directly.
Basket mode or hanging mode — when do I use each?
Hanging mode clamps the whole build plate with parts still attached, up to 214 × 135 × 180 mm — fastest, and it keeps resin off your hands. Basket mode takes parts off the plate first and washes them loose in the basket, up to 230 × 135 × 260 mm — better for tall models that exceed the hanging height, or for washing a batch of small parts thoroughly.
How much IPA does it need, and how often should it be changed?
The tank holds up to 7.5 litres, though you only need enough to submerge the parts — most users run considerably less. IPA becomes saturated with dissolved resin over time and stops cleaning effectively; when parts come out still tacky after a normal cycle, it needs replacing. Saturated IPA is chemical waste: let the dissolved resin cure out under UV, then dispose of the liquid at a chemical waste facility rather than pouring it away.
Should I choose this or the Mercury XS Bundle?
This one if your plate is large — it takes up to 10 inches directly and cures up to ø250 × 290 mm, the biggest of the two. The XS Bundle if throughput matters more than size: it is two separate machines, so one plate can wash while another cures, and it includes a handheld UV lamp for interiors and recesses. Plate size usually decides it before anything else does.
Does the wash station need ventilation too?
Yes — this is the step people overlook. IPA evaporates as it works and carries dissolved uncured resin with it, so the wash station is a VOC source in its own right, not just the printer. Keep the lid on when it is not in use, run it in the same ventilated space as the printer, and do not wash in a small sealed room.
Buying from Eolas Prints
We are a specialist 3D printing supplier in Cantabria, Spain, shipping across Spain and the EU. We stock resin printing consumables here rather than sourcing them when you need them. Not sure which station fits your printer? Ask us — plate size decides it, and we will tell you straight if the smaller unit is enough.