Eolas Prints Filament Profiles for Every Slicer: OrcaSlicer, Bambu Studio, PrusaSlicer & More

Sergio Peciña

Oct 7, 2026

Bambu Studio ElegooSlicer Material Alliance Partner Orca-Flashforge OrcaSlicer PrusaSlicer

Slicer software on a laptop – Eolas Prints filament profiles for every slicer

Eolas Prints filament profiles are available in seven slicers. They are built into OrcaSlicer and ElegooSlicer (all 18 materials) and PrusaSlicer (7 materials), available as free downloads for Bambu Studio and Orca-Flashforge / Flash Studio (all 18), and published through the partner programmes of UltiMaker Cura and Raise3D ideaMaker. If you are not sure which to use, OrcaSlicer works with almost every printer and includes every Eolas Prints material.

Last updated 7 October 2026. This page lists every official Eolas Prints slicer profile and links to the step-by-step guide for each one.

Slicer software on a laptop – Eolas Prints filament profiles for every slicer

Eolas Prints profiles by slicer

Pick your slicer to open its setup guide.

Slicer	How to get the profiles	Materials	Best for
OrcaSlicer	Built in (2.3.2+) – enable via Set filaments to use	18	Almost any printer: Bambu Lab, Prusa, Creality, Voron, Qidi, Sovol and more
Bambu Studio	Free download – import in one step	18	Bambu Lab A1, P1S, P2S, X1C, H2D and the AMS
PrusaSlicer	Built in – enable in the Configuration Wizard	7	Prusa MINI+, MK4S, CORE One and XL
ElegooSlicer	Built in (1.5+) – enable via Set filaments to use	18	Elegoo Centauri Carbon and Neptune 4 series
Orca-Flashforge / Flash Studio	Free download – import the .zip	18	Flashforge Adventurer 5M, AD5X, Creator 5 and Guider
UltiMaker Cura	Cura Marketplace (Material Alliance partner)	See guide	UltiMaker S3 and S5
Raise3D ideaMaker	ideaMaker Library (Open Filament Program)	See guide	Raise3D printers

Which slicer for my printer?

Bambu Lab: use the Bambu Studio pack, or OrcaSlicer if you prefer its built-in library.
Prusa: PrusaSlicer has 7 Eolas materials built in; OrcaSlicer covers all 18.
Flashforge: import our Orca-Flashforge / Flash Studio pack.
Elegoo: ElegooSlicer 1.5 and newer already includes all 18 profiles.
Creality, Anycubic, Voron, Qidi, Sovol and others: OrcaSlicer.
UltiMaker and Raise3D: use the partner profiles in Cura and ideaMaker.

Built-in or download – what is the difference?

Built-in profiles ship inside the slicer and update automatically with each release – you only tick them in a list. Downloadable profiles are files you import once; download the latest pack from the guide when we announce an update. The print settings are the same everywhere: every profile is derived from the values we tune in-house for each Eolas Prints material.

Quick starting settings for any other slicer

Using a slicer that is not listed? Start from these values on a 0.4 mm nozzle and PEI plate, then fine-tune with a temperature tower.

Material	Nozzle	Bed
PLA	210–220 °C	60 °C
PETG	240–245 °C	80 °C
ABS	255 °C	100 °C
ASA	260 °C	100 °C
TPU	220–225 °C	45–55 °C

Print ABS and ASA in an enclosed printer. Full per-material values, including PLA Silk, Neon, Ingeo and the TPU range, are in the OrcaSlicer guide.

Frequently asked questions

Which slicer is best for Eolas Prints filaments?

OrcaSlicer is the most complete choice: all 18 Eolas Prints profiles are built in and it supports almost every printer. Bambu Lab, Prusa, Flashforge and Elegoo owners can also use their brand’s own slicer with our profiles.

Are Eolas Prints slicer profiles free?

Yes. Every built-in profile and every download is free.

Which slicers have Eolas Prints profiles built in?

OrcaSlicer 2.3.2+, ElegooSlicer 1.5+ and PrusaSlicer. UltiMaker Cura and Raise3D ideaMaker offer them through their partner programmes.

Do I need a different profile for each printer?

No. The same Eolas Prints profile works across printers in a slicer. Just calibrate flow once per machine for the best results.

My slicer is not listed – what should I do?

Use the quick starting settings on this page, or switch to OrcaSlicer, which is free and supports most printers.

How do I know when profiles are updated?

Built-in profiles update with the slicer. For downloads, each guide shows its last-updated date at the top.

About the author
Sergio Peciña is a qualified Electrical & Electronics Engineer and Eolas Prints' Technical Design Engineer, with over 10 years of experience in 3D printing. He founded the maker spaces at the University of La Rioja and IDIVAL Santander. Every Eolas Prints filament is manufactured in-house in Cantabria, Spain, to ISO 9001 and ISO 14001 standards.

Shop Eolas Prints filaments: PLA | PETG | ABS | ASA | TPU – ISO-certified, made in Spain. Need help dialling in? See our troubleshooting & calibration hub.