Your cart (1)
Shipping charges are automatically calculated at checkout. International Duties are not included.
Drawer menu
Shipping charges are automatically calculated at checkout. International Duties are not included.
All 18 Eolas Prints PLA, PETG, ABS, ASA and TPU filaments have profiles built into ElegooSlicer, starting with version 1.5.0.6. There is nothing to download or import: in the Prepare tab, click Set filaments to use, filter the vendor list by Eolas Prints and tick your materials. The profiles work with the Elegoo Centauri Carbon, Centauri Carbon 2, Centauri, Neptune 4 and Neptune 3 series, OrangeStorm Giga and every other printer you add to ElegooSlicer.
Last updated 7 October 2026, checked against ElegooSlicer 1.5.3.5. Eolas Prints profiles are included in every ElegooSlicer release since 1.5.0.6.


The profiles are already installed with ElegooSlicer – you only choose which ones appear in your filament list.
The Eolas Prints profiles live in ElegooSlicer’s shared filament library, so they are available for every printer you set up: the Elegoo Centauri Carbon, Centauri Carbon 2, Centauri and Centauri 2, Neptune 4, 4 Pro, 4 Plus and 4 Max, the Neptune 3 series and the OrangeStorm Giga – and the other brands ElegooSlicer supports, such as Bambu Lab, Creality, Anycubic and Flashforge.
These are the values inside the ElegooSlicer profiles, tuned on a 0.4 mm nozzle and PEI build plate. They are also a reliable starting point in any other slicer.
| Material | Nozzle | First layer | Nozzle range | Bed (PEI) | Chamber | Max flow |
|---|---|---|---|---|---|---|
| PLA Premium | 210 °C | 215 °C | 190–230 °C | 60 °C | – | 15 mm³/s |
| PLA High Speed | 220 °C | 220 °C | 210–240 °C | 60 °C | – | 17.8 mm³/s |
| PLA Matte | 215 °C | 220 °C | 200–230 °C | 60 °C | – | 15 mm³/s |
| PLA Silk | 215 °C | 220 °C | 205–235 °C | 60 °C | – | 8 mm³/s |
| PLA Neon | 210 °C | 215 °C | 200–230 °C | 60 °C | – | 10 mm³/s |
| PLA Antibacterial | 216 °C | 220 °C | 195–230 °C | 60 °C | – | 15 mm³/s |
| PLA Ingeo 850 | 210 °C | 215 °C | 190–230 °C | 60 °C | – | 15 mm³/s |
| PLA Ingeo 870 | 220 °C | 225 °C | 200–235 °C | 60 °C | – | 15 mm³/s |
| PLA Transition | 210 °C | 215 °C | 200–230 °C | 60 °C | – | 15 mm³/s |
| PETG | 240 °C | 245 °C | 230–260 °C | 80 °C | – | 15 mm³/s |
| PETG UV Resistant | 245 °C | 250 °C | 235–265 °C | 80 °C | – | 15 mm³/s |
| PETG Transition | 240 °C | 245 °C | 230–260 °C | 80 °C | – | 15 mm³/s |
| ABS | 255 °C | 260 °C | 240–270 °C | 100 °C | 40 °C | 18 mm³/s |
| ASA | 260 °C | 270 °C | 245–275 °C | 100 °C | 40 °C | 18 mm³/s |
| TPU Flex 93A | 220 °C | 225 °C | 210–240 °C | 50 °C | – | 6 mm³/s |
| TPU Flex D53 | 220 °C | 225 °C | 205–235 °C | 45 °C | – | 8 mm³/s |
| TPU Flex D60 UV Resistant | 225 °C | 230 °C | 215–245 °C | 55 °C | – | 8 mm³/s |
| TPU Transition | 220 °C | 225 °C | 210–240 °C | 50 °C | – | 5 mm³/s |
Max flow is the maximum volumetric speed for a 0.4 mm hotend. Cooling, retraction and flow ratio start from the generic profile for each material type and can be fine-tuned in the filament settings.
The same Eolas Prints profiles are built into OrcaSlicer and PrusaSlicer, and available as free downloads for Bambu Studio and Orca-Flashforge (Flash Studio).
Yes. All 18 Eolas Prints filaments have profiles in ElegooSlicer’s built-in filament library, under the vendor Eolas Prints, from ElegooSlicer 1.5.0.6 onwards.
No. The profiles install with ElegooSlicer. Open Set filaments to use in the Prepare tab, filter by Eolas Prints and tick the materials you need.
ElegooSlicer 1.5.0.6 or newer. We recommend the latest release, as profile improvements ship with each update.
Yes. They work on the Centauri Carbon and Centauri Carbon 2, the Centauri series, the Neptune 4 and 3 series and the OrangeStorm Giga, as well as other brands in ElegooSlicer.
Yes. ElegooSlicer is based on OrcaSlicer and ships the same Eolas Prints profiles with identical print settings.
Yes. The Centauri Carbon is enclosed, which helps ABS and ASA avoid warping. Use the Eolas Prints ABS or ASA profile and keep the lid closed.
The profile gets you most of the way. For the cleanest results, run a quick flow rate and pressure advance calibration on your machine.
About the author
Sergio Peciña is a qualified Electrical & Electronics Engineer and Eolas Prints' Technical Design Engineer, with over 10 years of experience in 3D printing. He founded the maker spaces at the University of La Rioja and IDIVAL Santander. Every Eolas Prints filament is manufactured in-house in Cantabria, Spain, to ISO 9001 and ISO 14001 standards.
Shop the filaments these profiles are made for: PLA | PETG | ABS | ASA | TPU – ISO-certified, made in Spain.