Which xTool Laser Do You Actually Need? The Complete Buyer's Guide

Article author: Eolas Prints
Article published at: Jun 10, 2026
Article tag: Buyer's Guide Article tag: CO2 Article tag: Diode Article tag: Fiber Article tag: Guides Article tag: UV
xTool laser engravers lineup — buyer's guide to choosing the right machine

Choosing a laser engraver or cutter is not as simple as picking a wattage and clicking buy. The xTool range spans eight machines across five fundamentally different laser technologies — each suited to a different set of materials, workflows, and business models. This guide cuts through the confusion with a practical framework: understand your materials first, then choose the technology, then choose the machine.

The One Question That Decides Everything: What Do You Need to Process?

Every laser technology has a wavelength, and every material absorbs certain wavelengths and reflects or transmits others. A laser that works beautifully on wood will do nothing to bare metal. A CO2 laser that cuts acrylic cleanly cannot mark stainless steel. Before comparing machines, answer this: what materials will you work with most?

The Five xTool Laser Technologies at a Glance

Technology Wavelength Best for Cannot process
Diode laser 450–455nm Wood, leather, acrylic (opaque), fabric Bare metal, clear acrylic, glass
Infrared (IR) 1064nm Metal marking, ceramics, technical plastics Thick cutting
Fiber 1064nm Deep metal engraving, colour on steel, thin metal cutting Organic materials (use diode)
MOPA fiber 1064nm Full colour metal engraving, black on aluminium Organic materials
CO2 10,600nm Thick wood and acrylic cutting, production output Bare metal
UV 355nm 3D inner glass engraving, cold processing, ceramics Thick material cutting

The Complete xTool Range — Every Machine Mapped

Machine Technology Price Primary use case
M2 Color Craft 10W/20W Diode + CMYK inkjet €655 Full-colour print and cut
F1 Portable 10W Diode + 2W IR, galvo €1,109 Portable metal + organic, 4,000mm/s
F2 (5W IR) 15W Diode + 5W IR, galvo €1,512 Dual-laser galvo, 400×400mm area
F1 Ultra 20W Fiber + 20W Diode, galvo €3,024 Colour steel, deep metal, 10,000mm/s
X1 55W CO2 + optional galvo (diode/UV/MOPA/fibre) €3,428 Thick cutting + modular laser expansion
F2 Ultra UV 5W UV, galvo €4,336 3D inner glass, ceramics, cold processing
P3 80W CO2 €7,048 Production CO2, AI fire safety
F2 Ultra MOPA 60W MOPA + 40W Diode, galvo €4,790 Industrial MOPA colour, deep marking

Choosing by Budget

Under €1,000 — Creative Entry Point

The M2 Color Craft, from €655, pairs a 10W or 20W enclosed diode laser with a CMYK inkjet print head: print a full-colour design onto wood, paper, canvas or felt, then cut or engrave it in the same session without moving the material. It is the most versatile machine at this price.

€1,000–€2,000 — Serious Studio

For users who need metal marking capability, the F1 Portable adds 2W IR and galvo speed.

€2,000–€4,500 — Small Business Production

Two very different machines serve this tier. The X1 is a modular CO2 laser for businesses whose primary material is thick wood, acrylic, or leather — sign shops, furniture makers, craft studios. The F1 Ultra is for personalisation businesses working with metals at volume — trophies, jewellery, branded merchandise. These two machines serve opposite ends of the material spectrum at the same price tier.

€4,500+ — Professional and Industrial

The P3, from €7,048, adds 80W CO2 power, larger build volume, AI fire detection, and built-in CO2 suppression — the choice for production CO2 operations where the machine runs all day. The F2 Ultra MOPA, from €4,790, delivers 60W MOPA fiber capability — the right choice for industrial metal colour engraving, deep marking of hard metals, and applications requiring the full MOPA colour spectrum on stainless steel.

Quick Decision Guide

Answer these questions in order:

  1. Do you need to mark bare metal? Yes → you need a fiber or IR laser (F1, F1 Ultra, F2, F2 Ultra). No → continue.
  2. Do you need to cut wood over 10mm thick or any clear acrylic? Yes → CO2 (X1 or P3). No → continue.
  3. Do you need to engrave inside glass or on heat-sensitive materials? Yes → UV (F2 Ultra UV). No → continue.
  4. Do you need high-speed batch production? Yes → galvo machine (F1, F1 Ultra, F2, F2 Ultra). No → continue.
  5. None of the above? → the M2, from €655, is your enclosed diode entry point.

Available from Eolas Prints

Eolas Prints is an authorised xTool reseller based in Cantabria, Spain, serving customers across Europe. Every machine in this guide is available to order. Not sure which is right for your application? Contact us — we advise based on your specific materials and workflow before you buy.

Share