Your cart
Your cart is empty
Continue shopping
MY YARD FORMART S – Desktop Vacuum Former (A4)
MY YARD
SKU: MYD-FORMART-S
Increments of 1
Minimum of 1
Maximum of
Low stock
In stock, ready to ship
Sale price
¥204,500 JPY
Regular price
Regular price
¥204,500 JPY
Unit price
Tax included.
Shipping calculated at checkout.
MY YARD FORMART S – Desktop Vacuum Former (A4)
Sale price
¥204,500 JPY
Regular price
Regular price
¥204,500 JPY
Unit price
Couldn't load pickup availability
Have a question?
Description
Desktop vacuum former · A4-size sheets
MY YARD FORMART S
A compact all-in-one vacuum former with a built-in -90 kPa vacuum pump and quartz heater. Turn 3D prints and everyday objects into moulds, trays and shells, right from your desk.
The FORMART S is the compact member of MY YARD's FORMART family. It measures 50 × 46 × 31 cm, uses A4-size plastic sheets (300 × 205 mm) and has its vacuum pump built in, so there is no vacuum cleaner or compressor to connect. Original MY YARD sheets and third-party sheets both work.
A CNC-machined wooden forming bed absorbs less heat, which helps the sheet capture finer detail. A preheating programme, a sheet-dehumidifying function against air bubbles and a material database with 17 presets and 5 user slots make consistent results quick to reach, in Simple mode with its three smart modules or with full control in Advanced mode.
A4300 × 205 mm sheets
-90 kPaBuilt-in vacuum pump
160 mmMax. object height
0.3–3 mmSheet thickness
17 + 5Presets + user slots
What Makes It Different
🌀
Built-in industrial pump
An AC induction pump with -90 kPa suction and adjustable flow rate pulls the sheet tight around fine detail, with nothing extra to plug in.
🪵
CNC wooden forming bed
Wood absorbs less heat than metal, so moulds come out with finer, more intricate detail.
🔥
Quartz heating
Carbon-fibre quartz heater tubes (90–230 °C) heat the sheet evenly, with a 3-minute rapid heating cycle.
💧
Preheat & dehumidify
Built-in programmes dry moisture out of the sheet and preheat it, preventing bubbles and widening the range of formable materials.
🔒
Quick-lock frame
The patented dual-locking frame clamps the sheet with a turn of the handle and stops at any height, so you can load the next sheet without removing the formed part.
🎛️
Simple or Advanced mode
Three smart modules get beginners started; Advanced mode gives experienced users full control.
Key Specifications
| Specification | MY YARD FORMART S |
|---|---|
| Process | Vacuum forming (thermoforming) with built-in heater and vacuum pump |
| Sheet size | 300 × 205 mm (A4-size), 1 size |
| Work area | 230 × 130 mm |
| Max. object height | 160 mm |
| Sheet thickness | 0.3 – 3.0 mm |
| Heater | Quartz heater tubes, 90 – 230 °C |
| Vacuum | -90 kPa, flow rate adjustable |
| Pump | AC induction pump |
| Display | 3.5″ 480 × 320 full-colour LCD |
| Material database | 17 presets + 5 user settings; original and third-party sheets |
| Forming bed | CNC-machined wood |
| Power supply | 220 – 240 V AC, 800 W (100 – 120 V AC version: 800 W) |
| Dimensions | 50 × 46 × 31 cm |
| Weight | 12.8 kg (shipping weight approx. 16.5 kg) |
What's in the Box
- FORMART S vacuum former
- 30 HIPS sheets (297 × 205 mm)
- Set of cat bowl moulds
- Webbing remover kit
- USB cable
- Heat-resistant gloves
- Basic tool kit
Which FORMART should I choose?
| FORMART S | FORMART SE | FORMART 2 | |
|---|---|---|---|
| Sheet sizes | 300 × 205 mm (A4-size) only | 500 × 300, 420 × 300, 300 × 300 and 300 × 205 mm | 500 × 300, 420 × 300, 300 × 300 and 300 × 205 mm |
| Work area | 230 × 130 mm | 430 × 230 mm, adjustable | 430 × 230 mm, adjustable |
| Max. object height | 160 mm | 160 mm | 160 mm |
| Vacuum | -90 kPa, flow rate adjustable | -90 kPa, 3 selectable steps | -90 kPa, stepless pressure adjustment |
| Pump | AC induction | DC brushless + AC induction | DC brushless + AC induction |
| Power (220–240 V) | 800 W | 1700 W | 1700 W |
| QR-code material detection | — | — | Yes |
| Automatic mould release | — | — | Yes |
| Dual cooling fans | — | — | Yes |
| Dimensions | 50 × 46 × 31 cm | 63 × 53 × 48 cm | 63 × 53 × 48 cm |
| Weight | 12.8 kg | 24 kg | 25 kg |
Choose the FORMART S if your parts fit on an A4-size sheet and desk space matters: jewellery, chocolates, soap, small packaging and classroom projects. Choose the FORMART SE when you need the larger 500 × 300 mm format for masks, lampshades, trays and bigger packaging, with the option to switch down to smaller sheets. Choose the FORMART 2 if you form regularly: it adds QR-code material detection, automatic mould release, a built-in vacuum sensor and dual cooling fans to the same large format.
What's in each bundle?
| Bundle | Contents |
|---|---|
| Machine only | FORMART S vacuum former |
| Starter Bundle | FORMART S vacuum former Transparent PET sheets, 0.5 mm · 300 × 205 mm · 30-pack White HIPS sheets, 0.5 mm · 300 × 205 mm · 30-pack |
| Advanced Bundle | FORMART S vacuum former Transparent PET sheets, 0.5 mm · 300 × 205 mm · 30-pack White HIPS sheets, 0.5 mm · 300 × 205 mm · 30-pack Nature White LDPE sheets, 1.5 mm · 300 × 205 mm · 10-pack TPU sheets, 1.0 mm · 300 × 205 mm · 15-pack Microporous Forming Bed |
Everything in a bundle ships together as one order.
Which sheets fit the FORMART S?
The FORMART S takes one sheet size: 300 × 205 mm (A4-size). All four MY YARD materials are available in that size:
- Transparent PET: 0.3 mm (50-pack) or 0.5 mm (30-pack)
- White HIPS: 0.5 mm (30-pack)
- Nature White LDPE: 1.5 mm (10-pack)
- TPU: 1.0 mm (15-pack)
The 500 × 300 mm sheet packs are made for the FORMART SE and FORMART 2 and do not fit the FORMART S. The Microporous Forming Bed fits all FORMART models and is recommended for LDPE and PP sheets. The Volume Control Kit is for the FORMART SE and FORMART 2 only; the FORMART S comes with its own webbing remover kit.
| Material | Best for | Best forming temp. | MY YARD sheet sizes |
|---|---|---|---|
| Transparent PET | Chocolate moulds, clear packaging and blister shells, trays, light shells | 120–125 °C | 300 × 205 mm and 500 × 300 mm |
| White HIPS | Mould making, soap moulds, masks, cosplay props, model parts; paintable | 155–160 °C | 300 × 205 mm and 500 × 300 mm |
| Nature White LDPE | Reusable resin (epoxy), plaster and concrete casting moulds | 115–120 °C | 300 × 205 mm and 500 × 300 mm |
| TPU | Flexible protective and dust covers, soap and cement moulds | 115 °C | 300 × 205 mm |
Vacuum forming over 3D-printed moulds
If you own a 3D printer, a vacuum former turns one print into many parts. Print the master once, then form chocolate moulds, packaging inserts and blister shells, cosplay armour and masks, or casting moulds for resin, plaster, soap and concrete. MY YARD confirms that existing objects and 3D-printed parts can both be used as moulds.
- Draft angle: design in more than 3° so the formed sheet releases cleanly.
- Vent holes: add 1.5–2 mm holes in recessed areas so the vacuum reaches them.
- Proportions: keep a moderate height-to-width ratio; tall, narrow objects are harder to form.
- Strength: add internal supports to thin-walled or fragile prints so they withstand the vacuum.
- Clean and dry: water or debris drawn into the vacuum line can damage the pump.
How long does a printed mould last? In MY YARD's tests, PLA prints withstood about 3–5 formings, ABS prints about 30–50 and resin prints hundreds. For longer runs, MY YARD suggests forming a first shell, casting a plaster or cement copy of the mould from it, and producing from that.
What You Can Make
- Chocolate and confectionery moulds from 3D-printed masters, using Transparent PET
- Casting moulds for epoxy resin, plaster, soap and concrete, using LDPE or HIPS
- Packaging prototypes: blister shells, inserts and trays
- Jewellery, cosplay and model parts: small masks, props and accessories
- Education and maker spaces: a compact, easy-to-handle introduction to thermoforming
Safety & workspace
MY YARD states that its own PET, PP, TPU, LDPE and HIPS sheets release no toxic gas when formed, though some odour is possible, and recommends using the machine in a well-ventilated area. Third-party PVC, PC and ABS sheets can release harmful fumes when heated: check with your sheet supplier, ventilate well and follow the material's safety guidance. The heater and frame get hot, so use the heat-resistant gloves supplied.
Questions About the FORMART S
Which plastic sheets can I use in the FORMART S?
A4-size sheets of 300 × 205 mm, 0.3 to 3.0 mm thick. MY YARD supplies PET, HIPS, LDPE and TPU in that size, and third-party sheets work too: the built-in database covers materials such as PLA, PETG, PS, PE, HDPE, ABS, PP, PMMA, PC and KYDEX, and you can save your own settings in 5 user slots.
Will 500 × 300 mm sheets fit the FORMART S?
No. The FORMART S only takes 300 × 205 mm (A4-size) sheets. The 500 × 300 mm packs are for the FORMART SE and FORMART 2.
Can I vacuum form over a 3D-printed PLA mould?
Yes. The sheet is thin and cools quickly, so a printed mould is not necessarily damaged. In MY YARD's tests a PLA mould lasted about 3–5 formings, ABS about 30–50 and resin hundreds. For longer runs, cast a plaster or cement copy from the first formed shell and work from that.
Do I need a separate vacuum cleaner or compressor?
No. Every FORMART has its vacuum pump built in, rated at -90 kPa, together with the heater. You only need a mains socket.
Can I make chocolate moulds with it?
Yes. MY YARD lists chocolate moulds as a main use of its Transparent PET sheets, which are suitable for food-related applications. Form the sheet within three seconds of reaching temperature to avoid whitening.
Buying from Eolas Prints
Eolas Prints is a 3D printing filament manufacturer and digital fabrication equipment reseller based in Cantabria, Spain, and we ship worldwide. Many of our customers already own a 3D printer: a vacuum former turns those prints into moulds, packaging and shells. If you are not sure which FORMART or which sheet suits your project, talk to us first and we will help you choose.
Shipping
When do you ship?
We ship Monday to Friday from our warehouse in Cantabria, Spain. In-stock orders placed before the cut-off time ship the same business day. Orders placed after the cut-off, or at the weekend, ship on the next business day.
| Spain & Portugal | Orders placed before 4PM CET ship the same day. |
| Rest of the world | Orders placed before 1PM CET ship the same day. |
Products with a lead time shown on their product page ship as soon as they are available, within the lead time shown.
How do you ship?
Parcels — we ship with GLS within mainland Spain & Portugal and with UPS to the rest of the world. Shipping is calculated at checkout from your delivery address, the weight of your order and live carrier rates, so you see the exact price and delivery options before you pay.
Pallet freight — large and heavy machines, such as CO₂ laser cutters and industrial or large-format printers, ship on a pallet by road or, to islands and overseas destinations, by sea. Orders over 40 kg to mainland Spain & Portugal also ship by pallet. The pallet rate for your destination is shown at checkout, and orders over 150 kg ship on two pallets.
Free shipping
Free standard shipping on filament, pellets and accessories:
- Mainland Spain & Portugal: orders over €100 (GLS)
- Other EU countries: orders over €150 (UPS Standard), excluding Malta and Cyprus
Free shipping does not apply to 3D printers, 3D scanners, laser machines or other equipment, or to the Balearic and Canary Islands, Ceuta, Melilla, the Azores and Madeira.
Parcel delivery times
Business days after dispatch.
| Spain & Portugal |
GLS: Next business day UPS: 1 - 2 business days |
| Rest of Europe |
UPS Standard: 2 - 5 business days UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| North America |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| South America | UPS Worldwide Saver: 2 - 5 business days |
| Middle East |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| Asia | UPS Worldwide Saver: 5 - 7 business days |
| Australia & New Zealand |
UPS Worldwide Saver: 5 - 7 business days UPS Express: 3 - 5 business days (before 2PM) |
Pallet delivery times
Estimated, after dispatch.
| Mainland Spain & Portugal | 2 - 4 business days |
| Balearic Islands | 4 - 7 business days |
| EU mainland | 3 - 7 business days |
| UK, Switzerland & Norway | 5 - 10 business days |
| Islands by sea | 1 - 3 weeks Canary Islands, Ceuta, Melilla, Malta, Cyprus, Iceland, Azores, Madeira, Sardinia, Sicily |
| Rest of the world by sea | 4 - 8 weeks |
Pallet deliveries
- The carrier will contact you to arrange a delivery day, so please give a phone number that will be answered.
- Delivery is to your address at ground level. The pallet is not carried inside or unpacked, so please make sure you can unload it — with a forklift, a pallet truck or enough people. Machines can weigh 70 - 250 kg.
- If your address has restricted access (no truck access, a narrow street, no loading area) or you need a tail-lift, please contact us before ordering.
- Check the pallet before signing. Note any visible damage on the delivery note and send us photos within 24 hours.
- If a delivery fails because no one is available or the address cannot be accessed, redelivery and storage may be charged.
How about taxes & duties?
EU, including mainland Spain and the Balearic Islands: VAT is included in the price you pay at checkout. Nothing further is due on delivery.
Outside the EU VAT area, including the Canary Islands, Ceuta and Melilla: all orders ship on DAP (Delivered at Place) terms. We pay for export clearance and transport to your address. Import duties, import taxes (such as VAT, IGIC or IPSI) and customs clearance fees are not included and are paid by the recipient.
- Parcels: UPS will contact you to arrange payment of any duties and taxes before delivery.
- Pallets: the carrier's agent or a customs broker at destination will contact you. You are responsible for import clearance.
If a shipment is refused or not cleared through customs, the return freight and any costs incurred will be deducted from any refund.
Countries we do not ship to
Due to EU sanctions, we do not ship to Russia or Belarus.
Questions?
Contact us at support@eolasprints.com or +34 942 73 59 55 before ordering if you have any questions about delivery to your address.
Desktop vacuum former · A4-size sheets
MY YARD FORMART S
A compact all-in-one vacuum former with a built-in -90 kPa vacuum pump and quartz heater. Turn 3D prints and everyday objects into moulds, trays and shells, right from your desk.
The FORMART S is the compact member of MY YARD's FORMART family. It measures 50 × 46 × 31 cm, uses A4-size plastic sheets (300 × 205 mm) and has its vacuum pump built in, so there is no vacuum cleaner or compressor to connect. Original MY YARD sheets and third-party sheets both work.
A CNC-machined wooden forming bed absorbs less heat, which helps the sheet capture finer detail. A preheating programme, a sheet-dehumidifying function against air bubbles and a material database with 17 presets and 5 user slots make consistent results quick to reach, in Simple mode with its three smart modules or with full control in Advanced mode.
A4300 × 205 mm sheets
-90 kPaBuilt-in vacuum pump
160 mmMax. object height
0.3–3 mmSheet thickness
17 + 5Presets + user slots
What Makes It Different
🌀
Built-in industrial pump
An AC induction pump with -90 kPa suction and adjustable flow rate pulls the sheet tight around fine detail, with nothing extra to plug in.
🪵
CNC wooden forming bed
Wood absorbs less heat than metal, so moulds come out with finer, more intricate detail.
🔥
Quartz heating
Carbon-fibre quartz heater tubes (90–230 °C) heat the sheet evenly, with a 3-minute rapid heating cycle.
💧
Preheat & dehumidify
Built-in programmes dry moisture out of the sheet and preheat it, preventing bubbles and widening the range of formable materials.
🔒
Quick-lock frame
The patented dual-locking frame clamps the sheet with a turn of the handle and stops at any height, so you can load the next sheet without removing the formed part.
🎛️
Simple or Advanced mode
Three smart modules get beginners started; Advanced mode gives experienced users full control.
Key Specifications
| Specification | MY YARD FORMART S |
|---|---|
| Process | Vacuum forming (thermoforming) with built-in heater and vacuum pump |
| Sheet size | 300 × 205 mm (A4-size), 1 size |
| Work area | 230 × 130 mm |
| Max. object height | 160 mm |
| Sheet thickness | 0.3 – 3.0 mm |
| Heater | Quartz heater tubes, 90 – 230 °C |
| Vacuum | -90 kPa, flow rate adjustable |
| Pump | AC induction pump |
| Display | 3.5″ 480 × 320 full-colour LCD |
| Material database | 17 presets + 5 user settings; original and third-party sheets |
| Forming bed | CNC-machined wood |
| Power supply | 220 – 240 V AC, 800 W (100 – 120 V AC version: 800 W) |
| Dimensions | 50 × 46 × 31 cm |
| Weight | 12.8 kg (shipping weight approx. 16.5 kg) |
What's in the Box
- FORMART S vacuum former
- 30 HIPS sheets (297 × 205 mm)
- Set of cat bowl moulds
- Webbing remover kit
- USB cable
- Heat-resistant gloves
- Basic tool kit
Which FORMART should I choose?
| FORMART S | FORMART SE | FORMART 2 | |
|---|---|---|---|
| Sheet sizes | 300 × 205 mm (A4-size) only | 500 × 300, 420 × 300, 300 × 300 and 300 × 205 mm | 500 × 300, 420 × 300, 300 × 300 and 300 × 205 mm |
| Work area | 230 × 130 mm | 430 × 230 mm, adjustable | 430 × 230 mm, adjustable |
| Max. object height | 160 mm | 160 mm | 160 mm |
| Vacuum | -90 kPa, flow rate adjustable | -90 kPa, 3 selectable steps | -90 kPa, stepless pressure adjustment |
| Pump | AC induction | DC brushless + AC induction | DC brushless + AC induction |
| Power (220–240 V) | 800 W | 1700 W | 1700 W |
| QR-code material detection | — | — | Yes |
| Automatic mould release | — | — | Yes |
| Dual cooling fans | — | — | Yes |
| Dimensions | 50 × 46 × 31 cm | 63 × 53 × 48 cm | 63 × 53 × 48 cm |
| Weight | 12.8 kg | 24 kg | 25 kg |
Choose the FORMART S if your parts fit on an A4-size sheet and desk space matters: jewellery, chocolates, soap, small packaging and classroom projects. Choose the FORMART SE when you need the larger 500 × 300 mm format for masks, lampshades, trays and bigger packaging, with the option to switch down to smaller sheets. Choose the FORMART 2 if you form regularly: it adds QR-code material detection, automatic mould release, a built-in vacuum sensor and dual cooling fans to the same large format.
What's in each bundle?
| Bundle | Contents |
|---|---|
| Machine only | FORMART S vacuum former |
| Starter Bundle | FORMART S vacuum former Transparent PET sheets, 0.5 mm · 300 × 205 mm · 30-pack White HIPS sheets, 0.5 mm · 300 × 205 mm · 30-pack |
| Advanced Bundle | FORMART S vacuum former Transparent PET sheets, 0.5 mm · 300 × 205 mm · 30-pack White HIPS sheets, 0.5 mm · 300 × 205 mm · 30-pack Nature White LDPE sheets, 1.5 mm · 300 × 205 mm · 10-pack TPU sheets, 1.0 mm · 300 × 205 mm · 15-pack Microporous Forming Bed |
Everything in a bundle ships together as one order.
Which sheets fit the FORMART S?
The FORMART S takes one sheet size: 300 × 205 mm (A4-size). All four MY YARD materials are available in that size:
- Transparent PET: 0.3 mm (50-pack) or 0.5 mm (30-pack)
- White HIPS: 0.5 mm (30-pack)
- Nature White LDPE: 1.5 mm (10-pack)
- TPU: 1.0 mm (15-pack)
The 500 × 300 mm sheet packs are made for the FORMART SE and FORMART 2 and do not fit the FORMART S. The Microporous Forming Bed fits all FORMART models and is recommended for LDPE and PP sheets. The Volume Control Kit is for the FORMART SE and FORMART 2 only; the FORMART S comes with its own webbing remover kit.
| Material | Best for | Best forming temp. | MY YARD sheet sizes |
|---|---|---|---|
| Transparent PET | Chocolate moulds, clear packaging and blister shells, trays, light shells | 120–125 °C | 300 × 205 mm and 500 × 300 mm |
| White HIPS | Mould making, soap moulds, masks, cosplay props, model parts; paintable | 155–160 °C | 300 × 205 mm and 500 × 300 mm |
| Nature White LDPE | Reusable resin (epoxy), plaster and concrete casting moulds | 115–120 °C | 300 × 205 mm and 500 × 300 mm |
| TPU | Flexible protective and dust covers, soap and cement moulds | 115 °C | 300 × 205 mm |
Vacuum forming over 3D-printed moulds
If you own a 3D printer, a vacuum former turns one print into many parts. Print the master once, then form chocolate moulds, packaging inserts and blister shells, cosplay armour and masks, or casting moulds for resin, plaster, soap and concrete. MY YARD confirms that existing objects and 3D-printed parts can both be used as moulds.
- Draft angle: design in more than 3° so the formed sheet releases cleanly.
- Vent holes: add 1.5–2 mm holes in recessed areas so the vacuum reaches them.
- Proportions: keep a moderate height-to-width ratio; tall, narrow objects are harder to form.
- Strength: add internal supports to thin-walled or fragile prints so they withstand the vacuum.
- Clean and dry: water or debris drawn into the vacuum line can damage the pump.
How long does a printed mould last? In MY YARD's tests, PLA prints withstood about 3–5 formings, ABS prints about 30–50 and resin prints hundreds. For longer runs, MY YARD suggests forming a first shell, casting a plaster or cement copy of the mould from it, and producing from that.
What You Can Make
- Chocolate and confectionery moulds from 3D-printed masters, using Transparent PET
- Casting moulds for epoxy resin, plaster, soap and concrete, using LDPE or HIPS
- Packaging prototypes: blister shells, inserts and trays
- Jewellery, cosplay and model parts: small masks, props and accessories
- Education and maker spaces: a compact, easy-to-handle introduction to thermoforming
Safety & workspace
MY YARD states that its own PET, PP, TPU, LDPE and HIPS sheets release no toxic gas when formed, though some odour is possible, and recommends using the machine in a well-ventilated area. Third-party PVC, PC and ABS sheets can release harmful fumes when heated: check with your sheet supplier, ventilate well and follow the material's safety guidance. The heater and frame get hot, so use the heat-resistant gloves supplied.
Questions About the FORMART S
Which plastic sheets can I use in the FORMART S?
A4-size sheets of 300 × 205 mm, 0.3 to 3.0 mm thick. MY YARD supplies PET, HIPS, LDPE and TPU in that size, and third-party sheets work too: the built-in database covers materials such as PLA, PETG, PS, PE, HDPE, ABS, PP, PMMA, PC and KYDEX, and you can save your own settings in 5 user slots.
Will 500 × 300 mm sheets fit the FORMART S?
No. The FORMART S only takes 300 × 205 mm (A4-size) sheets. The 500 × 300 mm packs are for the FORMART SE and FORMART 2.
Can I vacuum form over a 3D-printed PLA mould?
Yes. The sheet is thin and cools quickly, so a printed mould is not necessarily damaged. In MY YARD's tests a PLA mould lasted about 3–5 formings, ABS about 30–50 and resin hundreds. For longer runs, cast a plaster or cement copy from the first formed shell and work from that.
Do I need a separate vacuum cleaner or compressor?
No. Every FORMART has its vacuum pump built in, rated at -90 kPa, together with the heater. You only need a mains socket.
Can I make chocolate moulds with it?
Yes. MY YARD lists chocolate moulds as a main use of its Transparent PET sheets, which are suitable for food-related applications. Form the sheet within three seconds of reaching temperature to avoid whitening.
Buying from Eolas Prints
Eolas Prints is a 3D printing filament manufacturer and digital fabrication equipment reseller based in Cantabria, Spain, and we ship worldwide. Many of our customers already own a 3D printer: a vacuum former turns those prints into moulds, packaging and shells. If you are not sure which FORMART or which sheet suits your project, talk to us first and we will help you choose.