Your cart (1)
Shipping charges are automatically calculated at checkout. International Duties are not included.
MY YARD Nature White LDPE Vacuum Forming Sheets
MY YARD
SKU: MYD-LDPE-15-300x205-10
Increments of 1
Minimum of 1
Maximum of
Low stock
In stock, ready to ship
Sale price
€56,36 EUR
Regular price
Regular price
€56,36 EUR
Unit price
Tax included.
Shipping calculated at checkout.
MY YARD Nature White LDPE Vacuum Forming Sheets
Sale price
€56,36 EUR
Regular price
Regular price
€56,36 EUR
Unit price
Couldn't load pickup availability
Have a question?
Description
Vacuum forming sheets · Nature White LDPE
MY YARD Nature White LDPE Sheets
Flexible, durable LDPE sheets for casting moulds: they capture fine detail like silicone, epoxy resin does not stick to them, and one mould can be reused hundreds of times.
Low-density polyethylene (LDPE) is light, flexible and strong. It reproduces fine detail similar to silicone and does not stick to resin (epoxy) objects. According to MY YARD, silicone moulds typically last about 20 uses, while LDPE moulds can be reused hundreds of times or serve as permanent moulds.
LDPE is sensitive to high forming pressure and can break above 60 kPa. Reduce the suction power and use the Microporous Forming Bed for the best results.
1.5 mmSheet thickness
115–120 °CBest forming temp.
Non-stickFor epoxy resin
Key Specifications
| Specification | MY YARD Nature White LDPE |
|---|---|
| Material | LDPE (low-density polyethylene), nature white |
| Thickness | 1.5 mm |
| Pre-heating | Not necessary |
| Best forming temperature | 115 – 120 °C |
| Application temperature | -40 to 90 °C |
| Properties | Non-stick (does not stick to epoxy resin); food safe |
| Forming note | May break above 60 kPa: reduce suction and use the microporous forming bed |
| Packs | 300 × 205 mm: 10 sheets 500 × 300 mm: 10 sheets |
Which FORMART does each pack fit?
| Pack | Fits | Notes |
|---|---|---|
| 1.5 mm · 300 × 205 mm · 10-pack | FORMART S | FORMART SE and FORMART 2 with the included size-switching kit |
| 1.5 mm · 500 × 300 mm · 10-pack | FORMART SE, FORMART 2 | Does not fit FORMART S |
300 × 205 mm (A4-size) packs are the FORMART S size and also fit the FORMART SE and FORMART 2 via their size-switching kit. 500 × 300 mm packs use the full format of the FORMART SE and FORMART 2 and are too large for the FORMART S.
Typical Uses
- Resin (epoxy) casting moulds
- Handmade soap moulds
- Plaster and concrete moulds
- Detailed reproduction moulds
Using it with 3D-printed moulds
Form LDPE over a 3D-printed master to make a reusable casting mould without silicone. Because epoxy does not stick to LDPE, the cast part comes away cleanly and the mould can be used again and again.
Questions About LDPE Sheets
Can LDPE replace silicone for resin casting?
For many moulds, yes. LDPE captures fine detail similar to silicone, epoxy resin does not stick to it, and MY YARD reports LDPE moulds can be reused hundreds of times, against about 20 uses for a typical silicone mould.
Why does my LDPE sheet break during forming?
The forming pressure is too high. LDPE can break above 60 kPa: lower the suction power and use the Microporous Forming Bed.
Which pack fits my FORMART?
The 300 × 205 mm pack fits the FORMART S, and the FORMART SE and FORMART 2 with their size-switching kit. The 500 × 300 mm pack fits the FORMART SE and FORMART 2 only.
Buying from Eolas Prints
Eolas Prints is a 3D printing filament manufacturer and digital fabrication equipment reseller based in Cantabria, Spain, and we ship worldwide. Many of our customers already own a 3D printer: a vacuum former turns those prints into moulds, packaging and shells. If you are not sure which FORMART or which sheet suits your project, talk to us first and we will help you choose.
Shipping
When do you ship?
We ship Monday to Friday from our warehouse in Cantabria, Spain. In-stock orders placed before the cut-off time ship the same business day. Orders placed after the cut-off, or at the weekend, ship on the next business day.
| Spain & Portugal | Orders placed before 4PM CET ship the same day. |
| Rest of the world | Orders placed before 1PM CET ship the same day. |
Products with a lead time shown on their product page ship as soon as they are available, within the lead time shown.
How do you ship?
Parcels — we ship with GLS within mainland Spain & Portugal and with UPS to the rest of the world. Shipping is calculated at checkout from your delivery address, the weight of your order and live carrier rates, so you see the exact price and delivery options before you pay.
Pallet freight — large and heavy machines, such as CO₂ laser cutters and industrial or large-format printers, ship on a pallet by road or, to islands and overseas destinations, by sea. Orders over 40 kg to mainland Spain & Portugal also ship by pallet. The pallet rate for your destination is shown at checkout, and orders over 150 kg ship on two pallets.
Free shipping
Free standard shipping on filament, pellets and accessories:
- Mainland Spain & Portugal: orders over €100 (GLS)
- Other EU countries: orders over €150 (UPS Standard), excluding Malta and Cyprus
Free shipping does not apply to 3D printers, 3D scanners, laser machines or other equipment, or to the Balearic and Canary Islands, Ceuta, Melilla, the Azores and Madeira.
Parcel delivery times
Business days after dispatch.
| Spain & Portugal |
GLS: Next business day UPS: 1 - 2 business days |
| Rest of Europe |
UPS Standard: 2 - 5 business days UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| North America |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| South America | UPS Worldwide Saver: 2 - 5 business days |
| Middle East |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| Asia | UPS Worldwide Saver: 5 - 7 business days |
| Australia & New Zealand |
UPS Worldwide Saver: 5 - 7 business days UPS Express: 3 - 5 business days (before 2PM) |
Pallet delivery times
Estimated, after dispatch.
| Mainland Spain & Portugal | 2 - 4 business days |
| Balearic Islands | 4 - 7 business days |
| EU mainland | 3 - 7 business days |
| UK, Switzerland & Norway | 5 - 10 business days |
| Islands by sea | 1 - 3 weeks Canary Islands, Ceuta, Melilla, Malta, Cyprus, Iceland, Azores, Madeira, Sardinia, Sicily |
| Rest of the world by sea | 4 - 8 weeks |
Pallet deliveries
- The carrier will contact you to arrange a delivery day, so please give a phone number that will be answered.
- Delivery is to your address at ground level. The pallet is not carried inside or unpacked, so please make sure you can unload it — with a forklift, a pallet truck or enough people. Machines can weigh 70 - 250 kg.
- If your address has restricted access (no truck access, a narrow street, no loading area) or you need a tail-lift, please contact us before ordering.
- Check the pallet before signing. Note any visible damage on the delivery note and send us photos within 24 hours.
- If a delivery fails because no one is available or the address cannot be accessed, redelivery and storage may be charged.
How about taxes & duties?
EU, including mainland Spain and the Balearic Islands: VAT is included in the price you pay at checkout. Nothing further is due on delivery.
Outside the EU VAT area, including the Canary Islands, Ceuta and Melilla: all orders ship on DAP (Delivered at Place) terms. We pay for export clearance and transport to your address. Import duties, import taxes (such as VAT, IGIC or IPSI) and customs clearance fees are not included and are paid by the recipient.
- Parcels: UPS will contact you to arrange payment of any duties and taxes before delivery.
- Pallets: the carrier's agent or a customs broker at destination will contact you. You are responsible for import clearance.
If a shipment is refused or not cleared through customs, the return freight and any costs incurred will be deducted from any refund.
Countries we do not ship to
Due to EU sanctions, we do not ship to Russia or Belarus.
Questions?
Contact us at support@eolasprints.com or +34 942 73 59 55 before ordering if you have any questions about delivery to your address.
Vacuum forming sheets · Nature White LDPE
MY YARD Nature White LDPE Sheets
Flexible, durable LDPE sheets for casting moulds: they capture fine detail like silicone, epoxy resin does not stick to them, and one mould can be reused hundreds of times.
Low-density polyethylene (LDPE) is light, flexible and strong. It reproduces fine detail similar to silicone and does not stick to resin (epoxy) objects. According to MY YARD, silicone moulds typically last about 20 uses, while LDPE moulds can be reused hundreds of times or serve as permanent moulds.
LDPE is sensitive to high forming pressure and can break above 60 kPa. Reduce the suction power and use the Microporous Forming Bed for the best results.
1.5 mmSheet thickness
115–120 °CBest forming temp.
Non-stickFor epoxy resin
Key Specifications
| Specification | MY YARD Nature White LDPE |
|---|---|
| Material | LDPE (low-density polyethylene), nature white |
| Thickness | 1.5 mm |
| Pre-heating | Not necessary |
| Best forming temperature | 115 – 120 °C |
| Application temperature | -40 to 90 °C |
| Properties | Non-stick (does not stick to epoxy resin); food safe |
| Forming note | May break above 60 kPa: reduce suction and use the microporous forming bed |
| Packs | 300 × 205 mm: 10 sheets 500 × 300 mm: 10 sheets |
Which FORMART does each pack fit?
| Pack | Fits | Notes |
|---|---|---|
| 1.5 mm · 300 × 205 mm · 10-pack | FORMART S | FORMART SE and FORMART 2 with the included size-switching kit |
| 1.5 mm · 500 × 300 mm · 10-pack | FORMART SE, FORMART 2 | Does not fit FORMART S |
300 × 205 mm (A4-size) packs are the FORMART S size and also fit the FORMART SE and FORMART 2 via their size-switching kit. 500 × 300 mm packs use the full format of the FORMART SE and FORMART 2 and are too large for the FORMART S.
Typical Uses
- Resin (epoxy) casting moulds
- Handmade soap moulds
- Plaster and concrete moulds
- Detailed reproduction moulds
Using it with 3D-printed moulds
Form LDPE over a 3D-printed master to make a reusable casting mould without silicone. Because epoxy does not stick to LDPE, the cast part comes away cleanly and the mould can be used again and again.
Questions About LDPE Sheets
Can LDPE replace silicone for resin casting?
For many moulds, yes. LDPE captures fine detail similar to silicone, epoxy resin does not stick to it, and MY YARD reports LDPE moulds can be reused hundreds of times, against about 20 uses for a typical silicone mould.
Why does my LDPE sheet break during forming?
The forming pressure is too high. LDPE can break above 60 kPa: lower the suction power and use the Microporous Forming Bed.
Which pack fits my FORMART?
The 300 × 205 mm pack fits the FORMART S, and the FORMART SE and FORMART 2 with their size-switching kit. The 500 × 300 mm pack fits the FORMART SE and FORMART 2 only.
Buying from Eolas Prints
Eolas Prints is a 3D printing filament manufacturer and digital fabrication equipment reseller based in Cantabria, Spain, and we ship worldwide. Many of our customers already own a 3D printer: a vacuum former turns those prints into moulds, packaging and shells. If you are not sure which FORMART or which sheet suits your project, talk to us first and we will help you choose.