Your cart
Your cart is empty
Continue shopping
xTool SafetyPro AP2 / AP2 Max Air Purifier for Laser Machines
xTool
SKU: XTL-AP2-ACC
Increments of 1
Minimum of 1
Maximum of
Low stock
In stock, ready to ship
Sale price
€1.032,99 EUR
-100%
Regular price
Regular price
€1.032,99 EUR
Unit price
per
Tax included.
Shipping calculated at checkout.
xTool SafetyPro AP2 / AP2 Max Air Purifier for Laser Machines
Sale price
€1.032,99 EUR
Regular price
Regular price
€1.032,99 EUR
Unit price
per
Couldn't load pickup availability
Have a question?
Description
The xTool SafetyPro AP2 is a fume purifier for laser cutters, engravers and DTF printers that filters smoke in the room instead of venting it outside. Choose the AP2 (150 m³/h, 6-layer filtration, 55 dB) for desktop machines, or the AP2 Max (700 m³/h, 7-layer filtration with a formaldehyde filter) for high-power CO2 lasers such as the P3. Both use SuperCyclone separation to catch large particles before the filters and remove 99.97% of particles.
Key Specifications
| Airflow | AP2: 150 m³/h · AP2 Max: 700 m³/h |
| Filtration | AP2: 6 layers (SuperCyclone, pre-filter, medium-efficiency, activated carbon, ultra-dense carbon mesh, HEPA) · AP2 Max: 7 layers, adding a KM formaldehyde filter |
| Cyclones | AP2: 36 · AP2 Max: 72 |
| Airflow control | AP2: 4 levels · AP2 Max: 0–100% |
| Noise | AP2: 55 dB · AP2 Max: 65 dB |
| Dimensions | AP2: 290 × 491 × 542 mm · AP2 Max: 662 × 452 × 845 mm |
| Smart control | Bluetooth auto on/off with xTool machines, material-based settings, filter-life monitoring |
How SuperCyclone Filtration Works
Smoke first passes through cyclone separators that spin out dust and large particles, extending pre-filter life by up to ten times. Air then runs through medium-efficiency, activated-carbon and ultra-dense carbon-mesh stages for odours and VOCs, and a HEPA stage for fine particles. The AP2 Max adds a professional formaldehyde filter that removes at least 80% of formaldehyde in a single pass at 50% airflow, and its larger filter set lasts around four times longer between changes.
Compatibility
AP2 – manual and automatic modes: M2, F2, F1 Ultra, F2 Ultra, F2 Ultra UV, M1 Ultra, P2S, S1 and the xTool OS1 Automatic Shaker Oven (Apparel Printer). Manual mode only: F1, F1 Lite, M1, P2 and D Series. xTool also lists the O1 Omni Printer as compatible.
AP2 Max – manual and automatic modes: MetalFab, P3, P2S, F2, F1 Ultra, F2 Ultra, F2 Ultra UV, S1 and M1 Ultra. Manual mode only: M2, F1, F1 Lite, M1, P2 and D Series.
Who It's For
- AP2: desktop diode, CO2 and galvo laser users (S1, P2S, M2, F-Series) and Apparel Printer owners
- AP2 Max: P3 and other high-power CO2 laser users, laser welding, and workshops with the strictest air-quality demands
Available from Eolas Prints
Eolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. Running a flagship CO2 laser? The AP2 Max is the matching purifier for the xTool P3 80W CO2 laser cutter.
Shipping
When do you ship?
We ship Monday to Friday from our warehouse in Cantabria, Spain. In-stock orders placed before the cut-off time ship the same business day. Orders placed after the cut-off, or at the weekend, ship on the next business day.
| Spain & Portugal | Orders placed before 4PM CET ship the same day. |
| Rest of the world | Orders placed before 1PM CET ship the same day. |
Products with a lead time shown on their product page ship as soon as they are available, within the lead time shown.
How do you ship?
Parcels — we ship with GLS within mainland Spain & Portugal and with UPS to the rest of the world. Shipping is calculated at checkout from your delivery address, the weight of your order and live carrier rates, so you see the exact price and delivery options before you pay.
Pallet freight — large and heavy machines, such as CO₂ laser cutters and industrial or large-format printers, ship on a pallet by road or, to islands and overseas destinations, by sea. Orders over 40 kg to mainland Spain & Portugal also ship by pallet. The pallet rate for your destination is shown at checkout, and orders over 150 kg ship on two pallets.
Free shipping
Free standard shipping on filament, pellets and accessories:
- Mainland Spain & Portugal: orders over €100 (GLS)
- Other EU countries: orders over €150 (UPS Standard), excluding Malta and Cyprus
Free shipping does not apply to 3D printers, 3D scanners, laser machines or other equipment, or to the Balearic and Canary Islands, Ceuta, Melilla, the Azores and Madeira.
Parcel delivery times
Business days after dispatch.
| Spain & Portugal |
GLS: Next business day UPS: 1 - 2 business days |
| Rest of Europe |
UPS Standard: 2 - 5 business days UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| North America |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| South America | UPS Worldwide Saver: 2 - 5 business days |
| Middle East |
UPS Worldwide Saver: 1 - 2 business days UPS Express: 1 - 2 business days (before 2PM) |
| Asia | UPS Worldwide Saver: 5 - 7 business days |
| Australia & New Zealand |
UPS Worldwide Saver: 5 - 7 business days UPS Express: 3 - 5 business days (before 2PM) |
Pallet delivery times
Estimated, after dispatch.
| Mainland Spain & Portugal | 2 - 4 business days |
| Balearic Islands | 4 - 7 business days |
| EU mainland | 3 - 7 business days |
| UK, Switzerland & Norway | 5 - 10 business days |
| Islands by sea | 1 - 3 weeks Canary Islands, Ceuta, Melilla, Malta, Cyprus, Iceland, Azores, Madeira, Sardinia, Sicily |
| Rest of the world by sea | 4 - 8 weeks |
Pallet deliveries
- The carrier will contact you to arrange a delivery day, so please give a phone number that will be answered.
- Delivery is to your address at ground level. The pallet is not carried inside or unpacked, so please make sure you can unload it — with a forklift, a pallet truck or enough people. Machines can weigh 70 - 250 kg.
- If your address has restricted access (no truck access, a narrow street, no loading area) or you need a tail-lift, please contact us before ordering.
- Check the pallet before signing. Note any visible damage on the delivery note and send us photos within 24 hours.
- If a delivery fails because no one is available or the address cannot be accessed, redelivery and storage may be charged.
How about taxes & duties?
EU, including mainland Spain and the Balearic Islands: VAT is included in the price you pay at checkout. Nothing further is due on delivery.
Outside the EU VAT area, including the Canary Islands, Ceuta and Melilla: all orders ship on DAP (Delivered at Place) terms. We pay for export clearance and transport to your address. Import duties, import taxes (such as VAT, IGIC or IPSI) and customs clearance fees are not included and are paid by the recipient.
- Parcels: UPS will contact you to arrange payment of any duties and taxes before delivery.
- Pallets: the carrier's agent or a customs broker at destination will contact you. You are responsible for import clearance.
If a shipment is refused or not cleared through customs, the return freight and any costs incurred will be deducted from any refund.
Countries we do not ship to
Due to EU sanctions, we do not ship to Russia or Belarus.
Questions?
Contact us at support@eolasprints.com or +34 942 73 59 55 before ordering if you have any questions about delivery to your address.
The xTool SafetyPro AP2 is a fume purifier for laser cutters, engravers and DTF printers that filters smoke in the room instead of venting it outside. Choose the AP2 (150 m³/h, 6-layer filtration, 55 dB) for desktop machines, or the AP2 Max (700 m³/h, 7-layer filtration with a formaldehyde filter) for high-power CO2 lasers such as the P3. Both use SuperCyclone separation to catch large particles before the filters and remove 99.97% of particles.
Key Specifications
| Airflow | AP2: 150 m³/h · AP2 Max: 700 m³/h |
| Filtration | AP2: 6 layers (SuperCyclone, pre-filter, medium-efficiency, activated carbon, ultra-dense carbon mesh, HEPA) · AP2 Max: 7 layers, adding a KM formaldehyde filter |
| Cyclones | AP2: 36 · AP2 Max: 72 |
| Airflow control | AP2: 4 levels · AP2 Max: 0–100% |
| Noise | AP2: 55 dB · AP2 Max: 65 dB |
| Dimensions | AP2: 290 × 491 × 542 mm · AP2 Max: 662 × 452 × 845 mm |
| Smart control | Bluetooth auto on/off with xTool machines, material-based settings, filter-life monitoring |
How SuperCyclone Filtration Works
Smoke first passes through cyclone separators that spin out dust and large particles, extending pre-filter life by up to ten times. Air then runs through medium-efficiency, activated-carbon and ultra-dense carbon-mesh stages for odours and VOCs, and a HEPA stage for fine particles. The AP2 Max adds a professional formaldehyde filter that removes at least 80% of formaldehyde in a single pass at 50% airflow, and its larger filter set lasts around four times longer between changes.
Compatibility
AP2 – manual and automatic modes: M2, F2, F1 Ultra, F2 Ultra, F2 Ultra UV, M1 Ultra, P2S, S1 and the xTool OS1 Automatic Shaker Oven (Apparel Printer). Manual mode only: F1, F1 Lite, M1, P2 and D Series. xTool also lists the O1 Omni Printer as compatible.
AP2 Max – manual and automatic modes: MetalFab, P3, P2S, F2, F1 Ultra, F2 Ultra, F2 Ultra UV, S1 and M1 Ultra. Manual mode only: M2, F1, F1 Lite, M1, P2 and D Series.
Who It's For
- AP2: desktop diode, CO2 and galvo laser users (S1, P2S, M2, F-Series) and Apparel Printer owners
- AP2 Max: P3 and other high-power CO2 laser users, laser welding, and workshops with the strictest air-quality demands
Available from Eolas Prints
Eolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. Running a flagship CO2 laser? The AP2 Max is the matching purifier for the xTool P3 80W CO2 laser cutter.