Updated: 16 November 2026 · Prices as at 16 November 2026
Short answer: for metre-scale PLA and PETG parts on a budget, the Elegoo OrangeStorm Giga (800 × 800 × 1000 mm, €2,779 incl. VAT) is the value pick. For nylon, polycarbonate and carbon-fibre parts you need an actively heated chamber: the CreatBot D400 HS (70 °C, €6,895) up to the CreatBot D1000 Pro HS (1050 mm cube, 80 °C, €47,499). For batch runs of identical parts, the Mingda MD-400D IDEX prints two at once. If your parts fit inside 360 mm, a Prusa XL+, Prusa CORE One L+ or Bambu Lab H2D costs less and is easier to live with.
We compared the 13 large-format FDM 3D printers we sell, from €1,899 to €47,499 including VAT, on the numbers that decide a purchase: build volume in millimetres and litres, chamber type and temperature, maximum nozzle temperature, rated power and the electrical supply each one needs, and the price with and without Spanish VAT. After the table you will find which machine is best for which job, what each one costs per print hour, and what to check before a pallet of up to 900 kg arrives at your door.
What counts as "large format" in 2026?
"Large format" has no formal definition. Desktop printers sold as "large" start at about 300 mm per side, while industrial machines go past 1 metre (1 meter, in US spelling) on every axis. Build volume in litres (width × depth × height) is the fairest way to compare them, because a tall, narrow machine and a wide, short one hold very different parts. We group the 13 machines into three tiers by footprint and volume:
| Tier | Build volume | Machines (volume) | Price incl. VAT |
|---|---|---|---|
| Large desktop | 27–65 L | Prusa CORE One L+ INDX (27.0 L), Prusa CORE One L+ (29.7 L), Bambu Lab H2D (33.8 L), Prusa XL+ (46.7 L), Flashforge Guider 3 Ultra (65.3 L) | €1,899 – €4,199 |
| Workshop | 64–238 L | Mingda MD-400D IDEX (64.0 L), CreatBot D400 HS (70.6 L), CreatBot D600 Pro 2 HS (216 L), Mingda MD-600D (216 L), CreatBot D600 Pro3 HS (238 L) | €4,124 – €21,249 |
| Metre-class | 640–1,158 L | Elegoo OrangeStorm Giga (640 L), Mingda MD-1000D (1,000 L), CreatBot D1000 Pro HS (1,158 L) | €2,779 – €47,499 |
The jump between tiers is not linear. A 600 mm cube holds 216 litres, more than three times a 400 mm cube (64 L), and a 1 m cube holds 1,000 litres, almost five times a 600 mm cube. Large-desktop machines sit on a bench and plug into any socket. Workshop machines arrive on a pallet, and most of them need floor space, a forklift or pallet truck at delivery and, for the heated-chamber models, a dedicated electrical circuit. The metre-class machines need all of that planned in advance. The Elegoo OrangeStorm Giga is the exception: an open-frame, metre-class machine that costs less than any workshop printer here.
The comparison table: 13 large-format 3D printers side by side
Machines are sorted by build volume within each tier. Scroll sideways on a phone to see every column.
| Printer | Build volume | Chamber | Max nozzle | Rated power · current at 230 V | Supply needed | Price incl. VAT | Price ex VAT | How to buy |
|---|---|---|---|---|---|---|---|---|
| Large desktop (27–65 L) | ||||||||
| Prusa CORE One L+ INDX | 298 × 275 × 330 mm (11.7 × 10.8 × 13.0 in) 27.0 L |
Actively heated, 60 °C | 300 °C | Not stated · auto 100–240 V | Normal socket | €2,529 (4 tools) €2,779 (8 tools) |
€2,090 (4 tools) €2,297 (8 tools) |
Add to cart |
| Prusa CORE One L+ | 300 × 300 × 330 mm (11.8 × 11.8 × 13.0 in) 29.7 L |
Enclosed, not heated | 290 °C | 240 W · 1.0 A | Normal socket | €1,899 | €1,569 | Add to cart |
| Bambu Lab H2D | 325 × 320 × 325 mm (12.8 × 12.6 × 12.8 in) 33.8 L |
Actively heated, 65 °C | 350 °C | Not stated · auto 100–240 V | Normal socket | €2,045.99 €2,279.99 (AMS Combo) |
€1,691 €1,884 (AMS Combo) |
Add to cart |
| Prusa XL+ (assembled) | 360 × 360 × 360 mm (14.2 × 14.2 × 14.2 in) 46.7 L |
Open frame (passive enclosure bundle available) | 290 °C | 240 W · 1.0 A | Normal socket | €2,399 (1 tool) €3,099 (2 tools) €4,099 (5 tools) |
€1,983 (1 tool) €2,561 (2 tools) €3,388 (5 tools) |
Add to cart |
| Flashforge Guider 3 Ultra | 330 × 330 × 600 mm (13.0 × 13.0 × 23.6 in) 65.3 L |
Enclosed, not actively heated | 350 °C | 850 W · 3.7 A | Normal socket | €4,199 | €3,470 | Add to cart |
| Workshop (64–238 L) | ||||||||
| Mingda MD-400D IDEX | 400 × 400 × 400 mm (15.7 × 15.7 × 15.7 in) 64.0 L |
Enclosed, not heated | 350 °C | 800 W · 3.5 A | Normal socket | €4,124 | €3,408 | Add to cart |
| CreatBot D400 HS | 420 × 400 × 420 mm (16.5 × 15.7 × 16.5 in) 70.6 L |
Actively heated, 70 °C | 420 °C | 3,200 W · 13.9 A | Dedicated 16 A circuit (over a 13 A plug’s limit) | €6,895 | €5,698 | Add to cart |
| CreatBot D600 Pro 2 HS | 600 × 600 × 600 mm (23.6 × 23.6 × 23.6 in) 216 L |
Actively heated, 70 °C | 420 °C | 5,500 W · 23.9 A | Dedicated 32 A circuit | €15,999 | €13,222 | Quote* |
| Mingda MD-600D | 600 × 600 × 600 mm (23.6 × 23.6 × 23.6 in) 216 L |
Enclosed, not heated | 350 °C | 2,000–2,400 W · 10.4 A | Normal socket | €21,249 | €17,561 | Quote* |
| CreatBot D600 Pro3 HS | 620 × 620 × 620 mm (24.4 × 24.4 × 24.4 in) 238 L |
Actively heated, 80 °C | 420 °C | 5,500 W (incl. 3,000 W chamber) · 23.9 A | Dedicated 32 A circuit | €21,249 | €17,561 | Quote* |
| Metre-class (640–1,158 L) | ||||||||
| Elegoo OrangeStorm Giga | 800 × 800 × 1000 mm (31.5 × 31.5 × 39.4 in) 640 L |
Open frame | 300 °C | 1,530 W · 6.7 A | Normal socket | €2,779 | €2,297 | Add to cart |
| Mingda MD-1000D | 1000 × 1000 × 1000 mm (39.4 × 39.4 × 39.4 in) 1,000 L |
Enclosed, not heated | 350 °C | 3,100 W · 13.5 A | Dedicated 16 A circuit (over a 13 A plug’s limit) | €38,749 | €32,024 | Quote* |
| CreatBot D1000 Pro HS | 1050 × 1050 × 1050 mm (41.3 × 41.3 × 41.3 in) 1,158 L |
Actively heated, 80 °C | 420 °C | 12,000 W (incl. 6,000 W chamber) · 52 A | Dedicated high-current supply; single- or three-phase: confirm with us | €47,499 | €39,255 | Quote* |
How we calculated: volume in litres = width × depth × height. Current = rated power ÷ 230 V, the worst case with every heater on; real draw is usually lower because heaters cycle. A "13 A plug" is the BS 1363 plug used in the UK, Ireland and much of the Gulf; at 230 V it tops out at about 2,990 W. Ex-VAT price = price incl. 21 % Spanish VAT ÷ 1.21, rounded to the euro. *Quote machines: the price is shown on the product page; freight, installation and training are quoted per project. Specifications from the manufacturers' spec sheets (the H2D chamber figure from Bambu Lab's spec sheet). Prices as at 16 November 2026: outside the EU your local store shows prices without Spanish VAT, and shipping is quoted separately.
Where the numbers come from. This guide was written by Tanuj Goswami, CTO of Eolas Prints, a 3D printing filament manufacturer in Reocín (Cantabria, Spain) that also sells and supports the printers listed here. Eolas Prints is an official Prusa Research reseller and an authorised Flashforge reseller. We are also a reseller of Bambu Lab, Elegoo, CreatBot and Mingda. Specifications come from the manufacturers' published spec sheets (Elegoo, CreatBot, Mingda, Prusa Research, Bambu Lab and Flashforge). Machine and filament prices come from our own store on 16 November 2026. Every calculated figure in this article (litres, amps, grams per hour, cost per hour) shows how it was worked out, so you can check it or redo it with your own tariff. The "best for" advice draws on what we see making and testing our own filament; we have not run identical benchmark prints on all 13 machines.
Which large 3D printer is best for…?
Best value for metre-scale PLA and PETG parts: Elegoo OrangeStorm Giga
The Elegoo OrangeStorm Giga is the best-value metre-class printer: an 800 × 800 × 1000 mm (640 L) open-frame FDM machine with a 300 °C nozzle and a four-zone 100 °C bed, priced at €2,779 incl. VAT (€2,297 ex VAT).
It is the only machine in this guide that prints a 1 m tall part for under €3,000, and at 1,530 W it runs from a normal socket in both 100–120 V and 220–240 V countries. The bed is split into four 410 × 410 mm zones, so you only heat the area you use. The trade-off is the open frame: Elegoo lists PLA, PETG, TPU and PA, and large ABS or ASA parts will warp without an enclosure. Extra print heads can be fitted for batch work (each adds 100 W of rated power). Elegoo states a 24-month warranty on new machines and 6 months on the extruder/printhead kit, with consumables excluded. More Elegoo machines are in our Elegoo collection.
Best for engineering materials (PA-CF, PC, PPS-CF): the CreatBot HS series
For nylon, polycarbonate and carbon-fibre composites, the CreatBot HS series is the pick, because every model pairs dual 420 °C nozzles with an actively heated chamber. Four sizes:
- The CreatBot D400 HS is a 420 × 400 × 420 mm (70.6 L) printer with dual 420 °C nozzles, a 70 °C heated chamber with HEPA and activated-carbon filtration and a 120 °C bed, priced at €6,895 incl. VAT (€5,698 ex VAT) and sold online. It is the compact way into engineering materials.
- The CreatBot D600 Pro 2 HS is a 600 mm cube (216 L) with dual 420 °C nozzles, a 70 °C heated chamber and a 100 °C bed, priced at €15,999 incl. VAT (€13,222 ex VAT), by quote.
- The CreatBot D600 Pro3 HS is a 620 mm cube (238 L) with dual 420 °C nozzles, an 80 °C heated chamber, a 120 °C bed and four Z motors, priced at €21,249 incl. VAT (€17,561 ex VAT), by quote.
- The CreatBot D1000 Pro HS is a 1050 mm cube (1,158 L) with dual 420 °C nozzles, an 80 °C heated chamber and a 120 °C bed, priced at €47,499 incl. VAT (€39,255 ex VAT), by quote. It is the largest machine in this guide.
CreatBot rates the HS extruders at 90 mm³/s of melt flow. That is a theoretical ceiling of about 400 g of PLA per hour (90 mm³/s × 3,600 s × 1.24 g/cm³). Real jobs average far less because of perimeters, travel moves and cooling, but the headroom matters on metre-scale parts. These machines draw 3.2 to 12 kW, so check the electrical supply before you order (see question 4 below).
Best for batch production of identical parts: Mingda MD-400D IDEX
The Mingda MD-400D is the batch-production pick: a 400 mm cube (64 L) IDEX printer with two independent 350 °C print heads and a 110 °C bed, priced at €4,124 incl. VAT (€3,408 ex VAT) and sold online.
In copy mode both heads print the same part side by side, each up to 200 mm wide; in mirror mode they print a left and a right part, each up to 160 mm wide. For parts that fit, that is two parts per job, which roughly halves wall-clock time for small batches. It draws 800 W (3.5 A) and runs from any socket. Its enclosure is not actively heated, and Mingda rates the nozzle at 350 °C peak and 320 °C continuous. At metre scale, the Giga's optional extra heads are the other route to batches: ask us which head configuration suits your part.
Best metre-cube enclosed machine without an industrial budget: Mingda MD-1000D vs CreatBot D1000 Pro HS
The Mingda MD-1000D is a 1000 mm cube (1,000 L) enclosed printer with dual 350 °C extruders on one head and a 110 °C bed, priced at €38,749 incl. VAT (€32,024 ex VAT), by quote.
The CreatBot D1000 Pro HS costs €8,750 more including VAT (€47,499 vs €38,749), or €7,231 more ex VAT. For that you get an 80 °C actively heated chamber, 420 °C nozzles instead of 350 °C, and 50 mm more on every axis. If you print PLA, PETG or TPU, the MD-1000D's unheated enclosure is enough, and it draws 3,100 W instead of 12,000 W. For PA-CF, PC or PPS-CF parts a metre long, pay for the heated chamber.
The same logic applies one size down. The Mingda MD-600D is a 600 mm cube (216 L) with dual 350 °C extruders on one head in an unheated enclosure, priced at €21,249 incl. VAT (€17,561 ex VAT), by quote: the same price as the CreatBot D600 Pro3 HS, which adds an 80 °C heated chamber, 420 °C nozzles and 20 mm per axis. The MD-600D draws 2,000–2,400 W against 5,500 W, so it runs from a normal socket. Mingda rates its extruders at 40 mm³/s, a theoretical ceiling of about 180 g of PLA per hour (40 × 3,600 × 1.24 ÷ 1,000).
Best multi-material large(ish) desktop: Prusa XL+, Prusa CORE One L+ INDX or Bambu Lab H2D
- The Prusa XL+ (fully assembled) is a 360 mm cube (46.7 L) toolchanger with 1, 2 or 5 independent tools, a 290 °C nozzle and a 16-segment 120 °C bed, priced from €2,399 incl. VAT (1 tool, €1,983 ex VAT) to €4,099 (5 tools, €3,388 ex VAT). It is open-frame; the XL+ enclosure bundle starts at €2,929 with one tool, and that enclosure is passive.
- The Prusa CORE One L+ INDX is a 298 × 275 × 330 mm (27 L) enclosed printer with a 60 °C actively heated chamber and a 4- or 8-tool INDX toolchanger, priced at €2,529 (4 tools) or €2,779 (8 tools) incl. VAT. Prusa states about 12 seconds and about 0.013 g of waste per tool change.
- The Bambu Lab H2D is a 325 × 320 × 325 mm (33.8 L, single nozzle) enclosed printer with two 350 °C nozzles on one head and a 65 °C actively heated chamber, priced at €2,045.99 incl. VAT (€1,691 ex VAT), or €2,279.99 with the AMS Combo.
If you need one material and simply want a bigger enclosed desktop machine, the Prusa CORE One L+ is a 300 × 300 × 330 mm (29.7 L) enclosed printer with a 290 °C nozzle and a 120 °C bed, and the cheapest machine here at €1,899 incl. VAT (€1,569 ex VAT). Eolas Prints is an official Prusa Research reseller. We compare the Prusa models in detail in Prusa CORE One vs CORE One L vs XL, and the Bambu pair in Bambu Lab H2D vs H2S. See also our Prusa and Bambu Lab collections.
Best for tall parts on a desktop: Flashforge Guider 3 Ultra
The Flashforge Guider 3 Ultra is a 330 × 330 × 600 mm (65.3 L) enclosed printer with dual 350 °C nozzles and a 120 °C bed, priced at €4,199 incl. VAT (€3,470 ex VAT). Its 600 mm of Z height suits columns, lamp bodies, tall housings and display pieces that would otherwise be printed in sections, and it draws 850 W (3.7 A). As far as we can verify, the enclosure is not actively heated, so treat it like the other unheated enclosures for ABS and ASA. Eolas Prints is an authorised Flashforge reseller (see why buy Flashforge from an authorised distributor). Our Flashforge for business guide covers the Guider range, and the full line-up is in our Flashforge collection.
Five questions that decide your shortlist
- How big is your largest part, really? Measure it, then check the diagonal. A 600 mm cube has a 1,039 mm space diagonal (a 620 mm cube: 1,074 mm), so a slender part about 1 m long can fit corner to corner in a D600-class printer, at the cost of more supports and a less favourable orientation. The Giga's 800 × 800 mm bed has a 1,131 mm diagonal, and its full 3D diagonal is 1,510 mm. Our upcoming guide to printing 1-metre parts in one piece goes into this in detail.
- Which materials? PLA, PETG and TPU print well on an open frame. ABS and ASA need an enclosure, and large ABS or ASA parts need a warm one. Nylon, polycarbonate and carbon-fibre composites at this size need an actively heated chamber of 60–80 °C. The next part of this series compares open-frame, enclosed and heated-chamber machines material by material.
- How much do you need to print per week? Large parts take days. A theoretical extrusion ceiling (about 400 g/h on the CreatBot HS extruders, about 180 g/h on the Mingda MD-600D and MD-1000D) tells you the best case; batch tools such as IDEX copy mode or extra heads multiply parts per job. A coming article compares IDEX, dual-nozzle heads and toolchangers.
- What electrical supply do you have? The CreatBot D400 HS (3,200 W), D600 Pro 2 HS and D600 Pro3 HS (5,500 W), D1000 Pro HS (12,000 W) and the Mingda MD-1000D (3,100 W) cannot run from a 13 A plug. They need a dedicated 16 A or 32 A circuit, typically with an IEC 60309 industrial socket, and the D1000 Pro HS needs about 52 A at 230 V: confirm with us whether your site should feed it single- or three-phase. The Giga, MD-400D, MD-600D, Guider 3 Ultra, Prusa machines and the H2D run from a normal socket. CreatBot and Mingda machines are specified for 220–240 V; if your grid is 60 Hz (Saudi Arabia, for example) or 110–120 V, confirm compatibility with us before ordering. Always have an electrician size the circuit.
- Can it get through your door? The freight planning weights we use for the workshop and metre-class machines run from 130 kg (MD-400D) to 892 kg (D1000 Pro HS), shipped on a pallet. Check door widths, lifts, floor loading and whether you have a forklift or pallet truck on the day. Exact crated dimensions and weights are confirmed with your quote.
Open frame, enclosed or heated chamber?
The 13 machines fall into three groups. Open frame: Elegoo OrangeStorm Giga and Prusa XL+ (a passive enclosure is available for the XL+). Enclosed but not actively heated: Prusa CORE One L+, Flashforge Guider 3 Ultra, Mingda MD-400D, MD-600D and MD-1000D. Actively heated chamber: Prusa CORE One L+ INDX (60 °C), Bambu Lab H2D (65 °C), CreatBot D400 HS and D600 Pro 2 HS (70 °C), CreatBot D600 Pro3 HS and D1000 Pro HS (80 °C).
Why it matters more on big machines: plastic shrinks as it cools, and the pull on the bed grows with the length of the part. A material that behaves at 200 mm can lift its corners or crack between layers at 600 mm. Our guide to fixing ABS and ASA warping covers the settings side; the next article in this series, on open-frame vs enclosed vs heated-chamber printers, sets out which chamber each material needs at large sizes.
What it really costs to own
Purchase price is only the start. As a first estimate, this table spreads the ex-VAT price over three years of 2,000 print hours (6,000 hours) and adds electricity at full rated power and an example tariff of €0.20 per kWh:
| Printer | Price ex VAT | Depreciation per hour | Electricity per hour (max.) | Total per hour (ceiling) |
|---|---|---|---|---|
| Prusa CORE One L+ | €1,569 | €0.26 | €0.05 | €0.31 |
| Bambu Lab H2D | €1,691 | €0.28 | — | — |
| Prusa XL+ (1 tool) | €1,983 | €0.33 | €0.05 | €0.38 |
| Prusa CORE One L+ INDX (4 tools) | €2,090 | €0.35 | — | — |
| Elegoo OrangeStorm Giga | €2,297 | €0.38 | €0.31 | €0.69 |
| Mingda MD-400D | €3,408 | €0.57 | €0.16 | €0.73 |
| Flashforge Guider 3 Ultra | €3,470 | €0.58 | €0.17 | €0.75 |
| CreatBot D400 HS | €5,698 | €0.95 | €0.64 | €1.59 |
| CreatBot D600 Pro 2 HS | €13,222 | €2.20 | €1.10 | €3.30 |
| Mingda MD-600D | €17,561 | €2.93 | €0.48 | €3.41 |
| CreatBot D600 Pro3 HS | €17,561 | €2.93 | €1.10 | €4.03 |
| Mingda MD-1000D | €32,024 | €5.34 | €0.62 | €5.96 |
| CreatBot D1000 Pro HS | €39,255 | €6.54 | €2.40 | €8.94 |
Straight-line depreciation over 6,000 hours, ex VAT. Electricity uses nameplate power, so real use is lower; "—" means the manufacturer does not state a rated power. The table leaves out filament, labour, failed prints, spare nozzles and build plates, freight and electrical work.
Filament is usually the largest running cost on big parts: at our price of €19.90 for 1 kg of PLA, a 2 kg part costs €39.80 in material (see the filament table below). A future article in this series works through the true cost of a large-format printer, including freight, the electrical installation and cost per part.
One head, two nozzles, IDEX or toolchanger?
There are four ways to put more than one nozzle on a large printer, and they solve different problems:
- Two nozzles on one head (CreatBot HS series, Mingda MD-600D and MD-1000D, Bambu Lab H2D): the right choice for a model plus soluble or breakaway support, or two materials in one part.
- IDEX, two independent heads (Mingda MD-400D): prints two copies or two mirrored parts at once, so it doubles parts per job for parts that fit in half the bed.
- Toolchanger (Prusa XL+ with up to 5 tools, Prusa CORE One L+ INDX with 4 or 8): many colours or materials in one part with little purge waste.
- Extra fixed heads (Elegoo OrangeStorm Giga): several identical parts printed at the same time at large scale.
An upcoming article in this series compares IDEX, dual-nozzle heads and toolchangers with real part-size limits and throughput.
Buying for a university, school or public body
We prepare formal quotations showing prices with and without VAT, together with the technical data you need for a purchase file, and we can include installation and training from our 3D printing training and support service. A detail budget holders find useful: the most expensive machine here, the CreatBot D1000 Pro HS, is €39,255 ex VAT, so every printer in this guide costs less than €40,000 before tax. For teaching labs, the large-desktop tier (€1,899–€4,199) gives every student access to big parts without an industrial electrical supply. A dedicated guide for universities and public buyers is coming as part of this series.
Buying from outside the EU
- VAT: exports from Spain are exempt from Spanish VAT, so outside the EU we invoice ex VAT. Your local import VAT or sales tax applies at destination.
- Incoterm: we ship DAP by default: we deliver to your address, and you pay import duties, taxes and customs clearance. If you prefer to use your own freight forwarder, EXW (collection from our warehouse in Cantabria, Spain) is available on request.
- HS code: since the 2022 Harmonized System, FDM 3D printers are classified under heading 8485.20 (additive manufacturing machines working by plastics or rubber deposit). Duty rates depend on your country and on the machine's country of origin, which is not the same as the country it ships from, so check the rate with your customs broker before you order.
- Freight: the workshop and metre-class machines travel as pallet freight by road or sea; ask us about air freight for the lighter machines. See our shipping policy.
A full guide to importing a 3D printer from Spain, covering documents and DAP vs DDP, is coming as part of this series.
Need a 1-metre part but not a printer?
If you need a handful of large parts rather than a machine, we print them for you. Our 3D printing service handles large-format parts, moulds (molds) and patterns, and our architectural 3D printing team makes large scale models for architects and developers; our architectural model scale guide helps you choose a scale. For parts beyond 1 metre or several kilos per hour, a pellet printer such as the PioCreat G12 (1200 × 1000 × 1000 mm) may suit you better; see our pellet 3D printer buying guide. An upcoming article covers printing 1-metre parts in one piece versus in sections.
Filament for large-format printers
All 13 printers in this guide use 1.75 mm filament. We make our filament in Reocín, Cantabria, and vacuum-pack every spool. These are our current prices for the materials that suit large parts:
| Eolas filament (1.75 mm) | Price incl. VAT | Per kg | Chamber for large parts | Filament for a 2 kg part |
|---|---|---|---|---|
| PLA | €19.90 / 1 kg | €19.90 | Not needed; open frame is fine | €39.80 |
| PETG | €25.50 / 1 kg | €25.50 | Not needed; open frame is fine | €51.00 |
| TPU 93A | €39.99 / 1 kg | €39.99 | Not needed; open frame is fine | €79.98 |
| ABS | €19.90 / 900 g | €22.11 | Enclosure; heated chamber for big parts | €44.22 |
| ASA | €23.50 / 900 g | €26.11 | Enclosure; heated chamber for big parts | €52.22 |
Prices incl. 21 % Spanish VAT as at 16 November 2026. "Filament for a 2 kg part" = price per kg × 2, material only.
PLA and PETG also come in 2.5 kg and 5 kg spools, which means fewer spool changes on prints that run for days; see our large filament spools for industry page. On a 60-hour print, damp filament is the most common avoidable failure, so read our filament drying and storage guide before your first big job.
Buying a large-format 3D printer from Eolas Prints
Eolas Prints is a 3D printing filament manufacturer and equipment seller based in Reocín, Cantabria (Spain), shipping worldwide. We sell the machine and the filament it runs on from one checkout.
- Buy online: Elegoo OrangeStorm Giga, CreatBot D400 HS, Mingda MD-400D, Prusa XL+, Prusa CORE One L+, Prusa CORE One L+ INDX, Flashforge Guider 3 Ultra and Bambu Lab H2D. The current lead time is shown next to the price.
- By quote: CreatBot D600 Pro 2 HS, D600 Pro3 HS and D1000 Pro HS, Mingda MD-600D and MD-1000D. The price is shown on the product page; freight, installation and training are quoted per project, and the lead time is confirmed with your quote.
- Warranty: provided by the manufacturer.
- Shipping: worldwide. Outside the EU we ship DAP (you pay import duties, taxes and clearance), with EXW collection from our Cantabria warehouse on request. Non-EU stores show prices without Spanish VAT, and shipping is quoted separately.
- Not sure yet? Book a free consultation, or put machines side by side with our 3D printer comparison tool.
Ready to compare prices and lead times?
The Giga, D400 HS, MD-400D and the large-desktop machines can be ordered online.
Looking at a D600, D1000, MD-600D or MD-1000D?
Tell us your country, delivery address and what you want to print, and we will quote freight, installation and training.
Browse more machines in our professional production 3D printers and 3D printers collections.
Frequently asked questions
What is the biggest 3D printer I can buy for under €5,000?
The Elegoo OrangeStorm Giga: 800 × 800 × 1000 mm (640 litres) for €2,779 incl. VAT (€2,297 ex VAT). It is an open-frame machine for PLA, PETG, TPU and PA. If you need an enclosure, the next largest under €5,000 are the Flashforge Guider 3 Ultra (330 × 330 × 600 mm, 65.3 L, €4,199) and the Mingda MD-400D IDEX (400 mm cube, 64 L, €4,124).
How much does an industrial large-format 3D printer cost?
In our range, industrial large-format FDM printers with a heated chamber cost from €6,895 incl. VAT (CreatBot D400 HS, €5,698 ex VAT) to €47,499 incl. VAT (CreatBot D1000 Pro HS, 1050 mm cube, €39,255 ex VAT). Metre-class enclosed machines start at €38,749 (Mingda MD-1000D). Add freight, any electrical work and training, which we quote per project for the larger machines.
Do I need a heated chamber for a large 3D printer?
Not for PLA, PETG or TPU, which print well on an open frame such as the Elegoo OrangeStorm Giga. ABS and ASA need an enclosure, and large parts in those materials need a warm one. Nylon, polycarbonate and carbon-fibre composites at large sizes need an actively heated chamber of 60–80 °C, as on the CreatBot HS series (70–80 °C), the Bambu Lab H2D (65 °C) or the Prusa CORE One L+ INDX (60 °C).
Can a large-format 3D printer run on a normal plug?
Some can. The Elegoo OrangeStorm Giga (1,530 W), Mingda MD-400D (800 W) and MD-600D (up to 2,400 W), Flashforge Guider 3 Ultra, the Prusa machines and the Bambu Lab H2D run from a normal socket. The CreatBot D400 HS (3,200 W), D600 Pro 2 HS and Pro3 HS (5,500 W), D1000 Pro HS (12,000 W, about 52 A at 230 V) and the Mingda MD-1000D (3,100 W) exceed a 13 A plug and need a dedicated 16 A or 32 A circuit, or more. Ask an electrician to size it.
Elegoo OrangeStorm Giga or Prusa XL: which should I buy?
Buy the Giga for size: 640 litres against the Prusa XL+'s 46.7 litres, almost 14 times the volume, for €2,779. Buy the Prusa XL+ for multi-material work and fine detail: a toolchanger with up to 5 tools and a 16-segment heated bed, from €2,399 (1 tool) to €4,099 (5 tools). Both are open-frame machines, so neither suits large ABS or nylon parts without an enclosure.
Do you ship large 3D printers outside the EU, and who pays duties?
Yes. Eolas Prints ships worldwide, including the UK, the Middle East, Africa and Latin America. Outside the EU we invoice without Spanish VAT and ship DAP: we deliver to your address and you pay import duties, taxes and customs clearance. EXW collection from our warehouse in Cantabria, Spain, is available on request if you use your own freight forwarder. 3D printers are classified under HS 8485.20; check your duty rate with your customs broker.
What filament diameter do large-format printers use?
All 13 large-format printers in this guide use 1.75 mm filament. Eolas Prints makes 1.75 mm PLA, PETG, ABS, ASA and TPU, and PLA and PETG are also available in 2.5 kg and 5 kg spools for long prints.