Eolas Prints Filament Profiles for Bambu Studio: Free Download & Install Guide

Eolas Prints provides free Bambu Studio filament profiles for all 18 of its PLA, PETG, ABS, ASA and TPU filaments. Download one .zip, import it in Bambu Studio via File → Import → Import Configs, and the profiles work on every current Bambu Lab printer – A1, A1 mini, A2L, P1P, P1S, P2S, X1, X1 Carbon, X1E, X2D, H2C, H2D, H2D Pro and H2S – with 0.2 to 0.8 mm nozzles.

Last updated 7 October 2026 for Bambu Studio 2.x. Profiles downloaded before this date were made for older versions of Bambu Studio and may not import or show up correctly – replace them with the files below.

Key facts

• What: Bambu Studio filament profiles for all 18 Eolas Prints filaments (9 PLA, 3 PETG, ABS, ASA and 4 TPU).
• Printers: all 14 current Bambu Lab models, from the A1 mini to the H2D Pro.
• Nozzles: 0.2, 0.4, 0.6 and 0.8 mm, including high-flow hotend variants.
• Software: Bambu Studio 2.0 or newer on Windows, macOS or Linux.
• Install time: about two minutes – one .zip file, no unzipping.
• Price: free. No Bambu Lab account is needed to import them.
• Tested: imported and verified by Eolas Prints in Bambu Studio in October 2026.
• Per-printer packs: download only your printer and import only the materials you use.

Download the Eolas Prints profiles

• All materials (recommended) – one .zip that imports every Eolas Prints profile at once.
• One file per material – unzip it and import only the .bbsflmt files for the materials you use.

Download profiles for your printer only

Each printer pack contains one .bbsflmt file per Eolas Prints material, holding only that printer's 0.2, 0.4, 0.6 and 0.8 mm nozzle presets. Importing PLA Premium for a P1S, for example, adds 4 presets instead of 56 – your preset list stays tidy and you save space in your Bambu Lab cloud presets. Best if you run one printer.

How to install Eolas Prints profiles in Bambu Studio

1. Update Bambu Studio to the latest version (2.0 or newer is required).
2. Download All materials above. Do not unzip it – Bambu Studio imports the .zip directly.
3. In Bambu Studio, open File → Import → Import Configs…
4. Select eolas-prints-bambu-studio-profiles-all.zip and confirm. If Bambu Studio asks whether to overwrite existing presets, choose Yes to all.
5. In the Prepare tab, select your printer and nozzle size, then open a filament slot's dropdown. The profiles are listed with your user filament presets as Eolas Prints PLA Premium, Eolas Prints PETG and so on.
6. For the AMS, click the slot holding the spool and choose the matching Eolas Prints profile from the same list.

Using a printer pack? Unzip it first, then in File → Import → Import Configs… select only the .bbsflmt files for the materials you use – for example Eolas Prints PLA Premium @Bambu Lab P1S.bbsflmt. You can import more materials later in the same way.

Supported Bambu Lab printers and nozzles

Each profile is created for a specific printer and nozzle size, so Bambu Studio applies the right limits automatically when you switch machines.

PLA Silk and TPU profiles start at the 0.4 mm nozzle. ABS and ASA are not offered for the A1 mini and A2L, matching Bambu Lab's own generic profiles.

Print settings for each Eolas Prints material

These are the values inside the Bambu Studio profiles, tuned on a 0.4 mm nozzle and PEI build plate. They also work as starting points in any other slicer.

Max flow is the maximum volumetric speed for a 0.4 mm hotend. On 0.2 mm nozzles the profiles use Bambu Lab's lower generic limit. Cooling, retraction and flow ratio come from Bambu Lab's matching generic profile and can be fine-tuned in the filament settings.

Can't see the profiles in Bambu Studio?

• Bambu Studio only shows profiles that match the printer and nozzle size currently selected. Switch to your printer and nozzle and check the list again.
• Check the table above – PLA Silk and TPU have no 0.2 mm nozzle profiles, and ABS and ASA are not available for the A1 mini and A2L.
• Make sure you are on Bambu Studio 2.0 or newer, then restart Bambu Studio after importing.
• Still stuck? Email support@eolasprints.com with your Bambu Studio version (Help → About) and printer model.

Using OrcaSlicer?

Eolas Prints profiles are built into OrcaSlicer's filament library – choose Eolas Prints as the vendor when adding a filament, no download needed. Comparing slicers? Read our guide to the best 3D printer software.

Tips for printing Eolas Prints filaments on Bambu Lab printers

• AMS: all Eolas Prints 1.75 mm filaments are AMS compatible. Flexible TPU variants (93A, D53) feed best from the external spool holder rather than an AMS slot.
• Calibration: run the printer's calibration cycle, or a flow dynamics calibration, the first time you use a new colour or material.
• Build plate: textured PEI is ideal for PLA and PETG. Use the cool plate or engineering plate for ABS and ASA.
• Material guides: PLA, PETG, ABS, ASA and TPU.

Frequently asked questions

How do I add Eolas Prints profiles to Bambu Studio?

Download the all-materials .zip from this page, then in Bambu Studio go to File → Import → Import Configs and select the .zip. The Eolas Prints profiles appear in the filament list whenever a supported printer and nozzle are selected.

Are the Eolas Prints Bambu Studio profiles free?

Yes. The profiles are free to download and use, and you don't need a Bambu Lab account to import them.

Which version of Bambu Studio do I need?

Bambu Studio 2.0 or newer. We recommend updating to the latest version before importing.

Which Bambu Lab printers are supported?

All 14 current models: A1, A1 mini, A2L, P1P, P1S, P2S, X1, X1 Carbon, X1E, X2D, H2C, H2D, H2D Pro and H2S, with 0.2, 0.4, 0.6 and 0.8 mm nozzles.

Can I import profiles for just my printer and one filament?

Yes. Download your printer's pack from the table above, unzip it and import only the .bbsflmt file for each material you use. Each file adds just that printer's nozzle presets, which saves space in your Bambu Lab cloud presets.

Why don't my old Eolas Prints profiles work any more?

Bambu Studio 2.x changed how filament presets are stored, so profile files made for older versions may not import or may not show up. Delete the old Eolas Prints presets and import the new download from this page.

Are Eolas Prints filaments AMS compatible?

Yes – all Eolas Prints 1.75 mm filaments are AMS compatible. For flexible TPU variants (93A, D53) we recommend the external spool holder, as flexibles feed more reliably that way.

Do the profiles work in OrcaSlicer?

Eolas Prints profiles are already built into OrcaSlicer's filament library, so OrcaSlicer users don't need this download – just choose Eolas Prints as the vendor.

Which build plate should I use?

A textured PEI plate is ideal for PLA and PETG. For ABS and ASA, use a cool plate or engineering plate. Keep the plate clean and grease-free for the best first-layer adhesion.

About the author
Sergio Peciña is a qualified Electrical & Electronics Engineer and Eolas Prints' Technical Design Engineer, with over 10 years of experience in 3D printing. He founded the maker spaces at the University of La Rioja and IDIVAL Santander. Every Eolas Prints filament is manufactured in-house in Cantabria, Spain, to ISO 9001 and ISO 14001 standards.

Shop the filaments these profiles are made for: PLA | PETG | ABS | ASA | TPU – ISO-certified, made in Spain. New to dialling in a material? See our troubleshooting & calibration hub.