Recycled rPET Pellets for 3D Printing: A European Buyer's Guide (2026)

Article author: Eolas Prints
Article published at: Jun 28, 2026
Article tag: Materials Article tag: Pellets
Recycled rPET pellets for 3D printing — pale blue, made from 100% post-consumer PET bottles

Short answer: Recycled PET (rPET) pellets are a low-cost, low-carbon feedstock for pellet-based and large-format 3D printing. Eolas Prints supplies European-made rPET pellets made from 100% post-consumer PET bottles, shipped worldwide from our stock in Spain — with next-day delivery to mainland Spain and Portugal, and VAT-exempt pricing for EU B2B orders. At €15.99 per 1 kg bag, they cost less than virgin PETG pellets while delivering closely comparable mechanical performance for non-critical and prototyping work.

This guide covers what rPET pellets are, who should use them, how they compare to virgin PETG and PLA pellets, and how to choose a European supplier.


What are rPET pellets?

rPET pellets are small spherical granules of recycled polyethylene terephthalate, made by collecting, cleaning and reprocessing used PET bottles into a printable thermoplastic feedstock. Unlike filament, pellets are fed directly into a pellet extruder (also called a direct-pellet or FGF — fused granulate fabrication — system), skipping the filament-making step entirely.

Eolas Prints rPET pellets are:

  • 100% post-consumer recycled — made from used PET bottles, not virgin petroleum feedstock
  • Bottle-grade resin — the same food-contact-safe rPET used to manufacture new plastic bottles, supplied here as a pellet feedstock for 3D printing
  • European-made by a specialist manufacturer, then shipped from our Cantabria stock
  • Food-contact safe and covered by a REACH statement (downloadable on the product page)
  • Supplied as spherical pellets, 2–3.5 mm, in a natural light-blue translucent tone

Because this is a genuine bottle-grade rPET — its primary use is making new bottles — it carries the food-contact safety and quality control of a packaging-grade material, with 3D printing as a secondary application.


Who should use rPET pellets?

rPET pellets are the right choice when at least one of the following is true:

  • You run a pellet extruder or large-format FGF printer and want to cut material cost per kilo, for example a PioCreat G5 Ultra, MS01 or G12
  • You print high volumes where filament cost becomes the dominant expense
  • Your project or tender has a recycled-content or sustainability requirement (procurement, public sector, ESG reporting)
  • You need functional prototypes, enclosures, brackets or structural parts that operate in moderate-temperature environments
  • You want a European-sourced, short-shipping material rather than imported stock

They are not the right choice when you need: tight batch-to-batch colour consistency, virgin-grade dimensional precision for high-tolerance mechanical parts, or sustained service above roughly 70 °C under load.


rPET vs virgin PETG vs PLA pellets

All three are stocked by Eolas Prints and ship from Spain. Verified specifications:

Property rPET Pellets PLA Pellets PETG Pellets
Price (from) €15.99 / 1 kg €10.99 / 1 kg €18.90 / 1 kg
Material 100% recycled PET co-polyester Polylactic acid Virgin PETG
Density 1.38 g/cm³ 1.24 g/cm³ 1.27 g/cm³
Hardness Shore D87 Shore D78 Rockwell 110
Pellet size 2–3.5 mm 3.1–3.6 mm 2–3.5 mm
Shape Spherical Spherical Spherical
Colour Light blue (translucent) Translucid Translucid
Recycled content Yes — 100% post-consumer No No
Food-contact safe Yes Yes Yes
Best for Sustainable functional parts, large-format Easy printing, prototypes, low-temp parts Tougher functional parts, higher temp

How rPET compares to virgin PETG

rPET and virgin PETG are chemically closely related — both are polyethylene terephthalate. The practical trade-offs for 3D printing are:

  • Carbon footprint: producing rPET uses roughly 60% less energy than producing virgin PET from petroleum feedstock.
  • Cost: rPET pellets are cheaper per kilo than virgin PETG pellets.
  • Colour consistency: rPET carries some residual colour variation between production batches — expected for any 100% recycled material, and rarely an issue for functional parts.
  • Mechanical properties: rPET delivers good toughness, moderate heat resistance and a natural translucency closely comparable to virgin PETG for non-critical applications.

How to choose a European rPET pellet supplier

When sourcing recycled pellets in the EU, check for:

  1. Stated recycled content and source — "100% post-consumer" is a stronger, more verifiable claim than vague "eco" labelling.
  2. Compliance documentation — a REACH statement, technical datasheet and safety datasheet should be available to download, not requested by email.
  3. Stock and lead time — pellet projects often need volume on short notice; ship-from-stock beats made-to-order.
  4. EU origin and shipping — European production means shorter shipping, lower transport emissions, and no import friction. B2B buyers should confirm whether intra-EU VAT-exempt pricing is available.
  5. Consistent pellet geometry — uniform pellet size (here, 2–3.5 mm spherical) feeds more reliably through extruder hoppers and screws.

Eolas Prints meets all five: 100% post-consumer source, downloadable REACH/technical/safety datasheets, ship-from-stock with next-day mainland Spain & Portugal delivery, European production, and VAT-exempt pricing for EU B2B orders. For production-scale users, pellets are also available in bulk big bags — ideal for continuous large-format printing or high-volume runs where buying by the spool-equivalent doesn't make sense.


Frequently asked questions

Are rPET pellets as strong as virgin PETG? For non-critical and functional applications, yes — rPET offers good toughness and moderate heat resistance closely comparable to virgin PETG. For high-tolerance mechanical parts requiring guaranteed virgin-grade consistency, virgin PETG is the safer choice.

What can you print with rPET pellets? Functional prototypes, enclosures, brackets, structural components for moderate-temperature environments (up to roughly 70 °C under light load), and any part where demonstrating recycled content is a requirement.

Do rPET pellets work in any pellet extruder? rPET pellets (2–3.5 mm, spherical) suit standard pellet-extrusion and FGF large-format systems. As with any PET-based material, drying before printing is recommended, as PET absorbs moisture. PioCreat does not name PET in the material lists for its pellet printers, so treat rPET as a PETG-class material and run a test print first. Our pellet 3D printer buying guide covers machine choice and drying.

Are the pellets food-contact safe? Yes. These are bottle-grade rPET pellets — the same recycled PET resin used to manufacture new plastic bottles — so the material is food-contact safe. A REACH statement is available to download on the product page. (As with any 3D printing material, a printed part's suitability for direct food contact also depends on the printing process, nozzle, and surface finish.)

Where are the pellets made? The rPET pellets are European-made by a specialist manufacturer and shipped from Eolas Prints' stock in Cantabria, Spain.

Is there a minimum order, and do you ship outside Spain? Pellets are sold in 1 kg bags and ship worldwide via UPS, with GLS within Spain and Portugal. Mainland Spain and Portugal orders placed before 4 PM ship for next-day delivery. EU B2B orders can be invoiced VAT-exempt.

Can I buy pellets in bulk? Yes. Beyond the standard 1 kg bags, pellets are available in bulk big bags for production-scale and continuous large-format printing. For bulk pricing and volumes, get in touch.

How much cheaper is rPET than virgin PETG? At list price, rPET pellets cost €15.99/kg versus €18.90/kg for virgin PETG pellets — alongside the recycled-content and lower-carbon advantages.


Eolas Prints manufactures its own PLA, PETG, TPU, ABS and ASA filament in Cantabria, Spain, and supplies PLA, PETG, TPU, ABS and recycled rPET pellets, plus the PioCreat pellet 3D printers that print them. Browse pellets →

Share