Bambu studio filament profiles for Eolas Prints filaments

Eolas Prints filament profiles are available directly in Bambu Studio for all Bambu Lab printers — including the X1C, P1S, A1, A1 Mini, H2D, H2S, X2D, A2L, and all AMS-compatible configurations. Our profiles are tuned for consistent, high-quality results across our full material range.

How to Install Eolas Prints Profiles in Bambu Studio

1. Open Bambu Studio
2. Go to Prepare tab
3. Click Filament dropdown and select Add
4. Search for Eolas Prints
5. Select your material and click Apply

Profiles are available for all of our filament materials — no manual entry required.

Available Material Profiles

• PLA 1.75mm and 2.85mm
• High Speed PLA
• PETG 1.75mm and 2.85mm
• PETG UV Resistant
• TPU Flex 93A
• TPU Flex D60 UV
• ABS
• ASA

Tips for Bambu Lab Printers with Eolas Prints Filaments

• AMS users: All Eolas Prints 1.75mm filaments are AMS compatible. Flexible TPU variants (93A, D53) work best in the external spool holder rather than AMS slots.
• LIDAR calibration: Run a full calibration cycle on first use with any new filament colour or material variant.
• Textured PEI plate: Ideal for PLA and PETG. Use cool plate or engineering plate for ABS and ASA.

Need help? Our technical support team is available to assist with print settings for any Eolas Prints material on your Bambu Lab printer.