MK8 Direct Driver Extruder "0.4mm 3.0mm NTC Thermistor Fully Assembled"
Direct Drive Extruder for 1.75mm filament completely assembled of excellent quality and the best performance for both professional 3d printers and maker. The motor is integrated in the extruder so no coupling part is necessary for the extruder. It is delivered with the integrated temperature sensor and temperature fuser.
With just two screws you can access the extrusion mechanism which is very practical to solve the problems of jams, installation and calibration.
Nozzle diameter: 0.4mm (included) optional 0.2mm to 0.5mm
Movement axis speed: 40 mm / s
Filament Diameter: 1.75mm
Nozzle flow rate: 24cc / h
Printing filament: 1.75mm
Printing material: PLA and ABS
Silicone case red part diameter: 28mm
Thermistor 100 K NTC
Cooling fan at: 12 V
Heater: 6 mm, 12 V, 30 W
Normal operating temperature: 190º-240º
Thermocouple type K 500mm link line.
1000mm stepper motor line
Step angle: 1.8 ± 5% degrees
Weight: 450 g
PAP motor of model 42HB34F08AB extruder
Make sure the maximum temperature does not exceed 280 °
x1 MK8 direct drive extruder