PrusaSlicer

PrusaSlicer: Filament Profiles for Eolas Prints materials

We have made it simple and easy to print our materials on your 3D printer by adding printing profiles to one of the most commonly used slicer - PrusaSlicer from Prusa Research.

PrusaSlicer

PrusaSlicer: Filament Profiles for Eolas Prints materials

We have made it simple and easy to print our materials on your 3D printer by adding printing profiles to one of the most commonly used slicer - PrusaSlicer from Prusa Research.

In this post we are going to see how we can download these print profiles for PrusaSlicer.

01

When PrusaSlicer is launched, get into the "Wizard" configuration menu.
If it's the first time running the application, this menu will appear immediately. Alternatively, you can access this menu from the menu bar found under "Configuration".

02

Locate the filaments tab and click on it. Doing so will bring up a long selection of materials. In the "Vendor" column, search for Eolas Prints, and then in the adjacent column (Profile) select the material needed.

03

Confirm with the "Finish" button and the materials will be added.

Now you just have to select it in the drop-down menu of the "Filament" section and start the printer.
01

When PrusaSlicer is launched, get into the "Wizard" configuration menu.
If it's the first time running the application, this menu will appear immediately. Alternatively, you can access this menu from the menu bar found under "Configuration".

02

Locate the filaments tab and click on it. Doing so will bring up a long selection of materials. In the "Vendor" column, search for Eolas Prints, and then in the adjacent column (Profile) select the material needed.

03

Confirm with the "Finish" button and the materials will be added.

Now you just have to select it in the drop-down menu of the "Filament" section and start the printer.

3D Printing

More Guides

View all

Extruder Calibration

Calibrating the extruder is a crucial aspect of 3D printing with filament (FDM or FFF). If the extruder distributes too little material, the object will have holes or walls that are too delicate. O...

Jan 16, 2023

3D Print Retraction Test

The aim of the retraction test is to achieve a "cleaner" part without material residues in the movement areas of the hotend. The slicer parameters that influence this test are mainly speed and retr...

Nov 14, 2022

3D Print Temperature Tower

This test should be carried out every time you print with a new material, as it provides one of the main printing parameter parameter of the filament i.e. the extrusion temperature. This test consi...

Nov 14, 2022
Carbon-neutral shipping with Shopify Planet
All deliveries are carbon neutral
Powered by Shopify Planet

Worldwide Shipping

Technical Support

Customer Service

Satisfied or Refunded

Secure payments