CreatBot D600 Pro3 HS – Industrial Large-Format 3D Printer (620×620×620 mm)

    From €21.600,23Tax included
    Request a Quote →
    Industrial large-format FDM 3D printer

    CreatBot D600 Pro3 HS

    620 × 620 × 620 mm single-nozzle build volume, 420 °C dual nozzles, a heated chamber up to 80 °C and up to 600 mm/s for engineering and carbon-fibre filaments.

    An industrial 3D printer differs from a desktop machine in three ways that matter for functional parts: a hot end that reaches engineering temperatures, an actively heated chamber that stops large parts warping and cracking, and a frame built to run for days. The CreatBot D600 Pro3 HS has all three. The third-generation D600 adds an 80 °C chamber, a 120 °C bed, quad Z-axis and 600 mm/s to a 620 mm cube of build volume.

    CreatBot (Henan Creatbot Technology, Zhengzhou, China) designs and manufactures the D600 Pro3 HS. Eolas Prints, in Reocín, Cantabria (Spain), supplies it together with the 1.75 mm engineering filaments it prints.

    620×620×620build volume (mm)
    420 °Cdual nozzles
    80 °Cheated chamber
    600 mm/smax print speed
    90 mm³/smax volumetric flow

    What makes the D600 Pro3 HS different

    🔥

    420 °C dual nozzles

    Prints PC, nylon and carbon- or glass-filled PA, PET, PP and PPS. The idle nozzle lifts automatically and a shutter seals it, so it does not ooze onto the part.

    🌡️

    80 °C heated chamber

    An actively heated, insulated chamber keeps large ABS, ASA, PC and nylon parts from warping and delaminating. HEPA and activated-carbon filters clean the exhaust air.

    🔁

    Backup-nozzle switching

    If one nozzle runs out of filament or clogs during a long job, the printer can switch to the second nozzle and carry on, which protects multi-day prints.

    📐

    Eddy-current levelling and camera calibration

    An eddy-current sensor maps the bed and a camera measures the XY offset between the two nozzles, so dual-material and support prints line up without manual tuning.

    💧

    Built-in filament dry room

    Spools sit in a heated dry room (0–70 °C) that keeps nylon, PC and other moisture-sensitive filaments dry during long prints.

    Full specification

    Specification D600 Pro3 HS
    Printing technology FDM, dual-nozzle, fully enclosed with actively heated chamber
    Build volume Single nozzle: 620 × 620 × 620 mm; dual nozzle: 565 × 620 × 620 mm
    Extruder Dual direct-drive hot ends with automatic nozzle lifting, nozzle shutter and backup-nozzle switching
    Nozzle diameter 0.4 mm standard; 0.3–1.0 mm optional
    Filament diameter 1.75 mm
    Max nozzle temperature 420 °C
    Heated bed Up to 120 °C
    Chamber Actively heated, up to 80 °C
    Print speed Up to 600 mm/s
    Max volumetric flow 90 mm³/s
    Bed levelling Eddy-current auto-levelling; camera-assisted XY nozzle offset calibration
    Motion system Quad Z-axis
    Air filtration HEPA + activated-carbon filter
    Filament storage Filament dry room, 0–70 °C
    Screen 7" touchscreen
    Connectivity USB, Wi-Fi, LAN (Ethernet)
    Software and firmware Klipper firmware; CreatWare, Orca Slicer, Cura
    Power 2500 W printer + 3000 W chamber heating
    Machine size 1150 × 950 × 1250 mm
    Weight 250 kg net, 290 kg packed
    Supported materials PLA, ABS, ASA, PETG, PC, PP, PA (nylon), TPU, PC-ABS, PA-ABS, ABS-CF, PC-CF, PET-CF, PET-GF, PA-CF, PA-GF, PP-CF, PP-GF, UltraPA-CF, PPS-CF

    Source: CreatBot D600 Pro3 HS product page and specification table (creatbot.com, November 2026). Dual-nozzle printing reduces the X width of the build volume as shown.

    Materials and Eolas filaments

    CreatBot lists PLA, ABS, ASA, PETG, PC, PP, PA (nylon), TPU, PC-ABS, PA-ABS, ABS-CF, PC-CF, PET-CF, PET-GF, PA-CF, PA-GF, PP-CF, PP-GF, UltraPA-CF, PPS-CF for the D600 Pro3 HS.

    For everyday prototypes and fixtures, Eolas Prints supplies 1.75 mm ABS, ASA, PETG, PLA and TPU 93A filament. For carbon-fibre or high-temperature grades, ask us about availability.

    Who it's for

    • Manufacturers and engineering teams printing jigs, fixtures, end-use parts and functional prototypes in engineering plastics
    • Automotive, motorsport and drone builders who need large carbon-fibre-reinforced parts
    • Mould, pattern and tooling makers printing large patterns and moulds in heat-resistant materials
    • Universities, R&D centres and service bureaus that run long, unattended jobs

    Questions about the D600 Pro3 HS

    How big can the CreatBot D600 Pro3 HS print?

    620 × 620 × 620 mm with one nozzle, or 565 × 620 × 620 mm when printing with both nozzles.

    Which materials can the D600 Pro3 HS print?

    With 420 °C nozzles and a heated chamber, it prints PLA, ABS, ASA, PETG, PC, PP, nylon, TPU and fibre-filled grades such as PA-CF, PET-CF, PP-GF and PPS-CF. For PEEK and PEI (ULTEM), CreatBot makes separate PEEK-series printers.

    What power supply does the D600 Pro3 HS need?

    CreatBot specifies 2500 W printer + 3000 W chamber heating. Check your site supply before ordering.

    How is the D600 Pro3 HS delivered?

    As a complete machine on a pallet by freight; CreatBot gives 250 kg net and 290 kg packed. Outside the EU we ship DAP, so the recipient pays duties and import taxes.

    Buying from Eolas Prints

    Eolas Prints, based in Cantabria, Spain, supplies CreatBot printers and ships worldwide. The D600 Pro3 HS is covered by the CreatBot manufacturer's warranty, and the current lead time is shown next to the price. It travels as pallet freight; outside the EU we ship DAP, so duties and import taxes are paid by the recipient.

    Request a quote: freight, installation and training are quoted per project. Contact us with your delivery country and application and we will prepare a full quotation.

    Recommendations