{"title":"Professional \u0026 Production 3D Printers","description":"\u003cp\u003eFor workshops, studios and print farms where downtime costs money, these professional and production 3D printers are built to run. Every machine in this collection is chosen for reliability, serviceability and consistent part quality over long, repeated jobs — the qualities that matter when printing is part of how you earn.\u003c\/p\u003e\u003cp\u003eProduction-grade printing demands more than speed. It needs auto-calibration and runout detection to reduce failed prints, enclosed and temperature-stable chambers for engineering materials like ABS, ASA and polycarbonate, and a mature ecosystem of spare parts and firmware support so a worn nozzle or bed never means days of downtime. Machines like the Prusa CORE One, Pro HT90, Bambu Lab H2 series and Flashforge's industrial Creator and Guider lines are engineered for exactly this.\u003c\/p\u003e\u003cp\u003eAs an authorised Prusa reseller and Flashforge distributor, Eolas Prints supports professional buyers with genuine parts, volume advice and B2B service across Spain, the EU and the Middle East. If your printer needs to be a dependable tool, start here.\u003c\/p\u003e\u003cp\u003eRelated collections: for big build volumes see our \u003ca href=\"\/en-sk\/collections\/large-format-3d-printers\"\u003elarge-format 3D printers\u003c\/a\u003e, or for automated colour and material changes see \u003ca href=\"\/en-sk\/collections\/multicolor-multi-material-3d-printers\"\u003emulticolour \u0026amp; multi-material 3D printers\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"original-prusa-mk4s-fully-assembled","title":"Original Prusa MK4S - Fully Assembled","description":"\u003cp\u003eThe Original Prusa MK4S is Prusa Research's flagship open-source FDM 3D printer, fully assembled and ready to print out of the box. The MK4S builds on the proven MK4 platform with an upgraded 360° cooling system that significantly improves overhang performance and surface quality on complex geometry. With a 250×210×220 mm build volume, the Nextruder direct drive extruder, and Input Shaper technology enabled from the factory, the MK4S delivers consistent high-quality prints across a wide range of materials without manual calibration.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — Cartesian (bed-slinger)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e250 × 210 × 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e290°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer resolution\u003c\/td\u003e\n\u003ctd\u003e0.05–0.30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder\u003c\/td\u003e\n\u003ctd\u003eNextruder — direct drive, load cell-based auto-levelling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003e360° part cooling (MK4S upgrade)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed surface\u003c\/td\u003e\n\u003ctd\u003eRemovable spring steel sheet (magnetic PEI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Shaper\u003c\/td\u003e\n\u003ctd\u003eYes — enabled from factory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eEthernet, Wi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote monitoring\u003c\/td\u003e\n\u003ctd\u003ePrusa Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eOpen-source (Prusa Buddy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly\u003c\/td\u003e\n\u003ctd\u003eFully assembled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eMK4S vs MK4 — What Changed\u003c\/h2\u003e\n\u003cp\u003eThe key difference between the MK4S and its predecessor is the 360° cooling system. The original MK4 used single-direction part cooling, which limited overhang angles and required careful orientation of complex parts. The MK4S's 360° airflow wraps cooling air around the print from all directions simultaneously — improving overhangs, reducing stringing, and allowing more aggressive print speeds on detailed geometry without support degradation. Existing MK4 owners can upgrade to MK4S specification with the cooling upgrade kit.\u003c\/p\u003e\n\n\u003ch2\u003eNextruder — Auto-Levelling Without Manual Z Offset\u003c\/h2\u003e\n\u003cp\u003eThe Nextruder uses a load cell sensor to detect bed contact during first-layer calibration. Rather than relying on a probe offset (which needs manual tuning), the extruder itself detects the nozzle touching the bed and calibrates from that direct measurement. This means first layers are consistently correct from the first print on a new surface — no Live Adjust Z hunting required. The system compensates automatically when switching between textured and smooth spring steel sheets.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG, ASA, ABS, HIPS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU, TPE (direct drive handles flexible filaments well)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e PC Blend, PA-11 Nylon, PA-12 Nylon, PA-CF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite:\u003c\/strong\u003e Carbon-fibre-filled, glass-fibre-filled, metal-filled (hardened nozzle required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-temp:\u003c\/strong\u003e PC, CPE — up to 290°C nozzle and 120°C bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eOpen Source and Ecosystem\u003c\/h2\u003e\n\u003cp\u003eAll Prusa hardware design files and firmware are open source. The MK4S is compatible with PrusaSlicer (free, actively developed by Prusa Research) as well as OrcaSlicer and other community slicers. Prusa Connect enables remote print monitoring, camera integration, and print farm management from a browser or mobile device.\u003c\/p\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMakers and hobbyists who want a reliable workhorse printer with no-fuss operation and excellent community support\u003c\/li\u003e\n\u003cli\u003eDesigners and engineers using PLA\/PETG for prototyping and functional parts\u003c\/li\u003e\n\u003cli\u003eSchools and educational labs needing a safe, well-documented, fully supported machine\u003c\/li\u003e\n\u003cli\u003ePrint farm operators — the MK4S's reliability, remote management, and fast print speeds make it a proven farm platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official Prusa Research reseller based in Cantabria, Spain. EU warranty, Spanish-language support, and fast shipping across Europe included.\u003c\/p\u003e","brand":"Prusa Research","offers":[{"title":"Default Title","offer_id":48282627866951,"sku":"PRU-MK4-3D-PRN","price":999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/original-prusa-mk4s-fully-assembled-3d-printer-orange-396.webp?v=1728521816"},{"product_id":"original-prusa-xl-fully-assembled","title":"Original Prusa XL - Fully Assembled","description":"\u003cp\u003eThe Original Prusa XL is Prusa Research's large-format multi-material 3D printer, built around a unique tool-changing system rather than the filament-switching approach used by most multi-material solutions. Up to five independent toolheads — each a complete extruder — mount on the same CoreXY gantry and swap in and out automatically during the print. Because each toolhead purges independently and there is no shared hot zone between filaments, colour transitions are clean and material mixing is eliminated. The XL's 360×360×360 mm build volume is among the largest available on any desktop FDM printer.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY with tool changer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e360 × 360 × 360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e290°C (per toolhead)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToolheads\u003c\/td\u003e\n\u003ctd\u003e1, 2, or 5 (selectable at purchase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder (per head)\u003c\/td\u003e\n\u003ctd\u003eNextruder — direct drive, load cell auto-levelling per toolhead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed\u003c\/td\u003e\n\u003ctd\u003eSegmented heated — independent zone control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed surface\u003c\/td\u003e\n\u003ctd\u003eRemovable spring steel sheet (magnetic PEI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Shaper\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eEthernet, Wi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote monitoring\u003c\/td\u003e\n\u003ctd\u003ePrusa Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional\u003c\/td\u003e\n\u003ctd\u003eEnclosure (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eOpen-source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eTool Changer vs Filament Switcher — Why It Matters\u003c\/h2\u003e\n\u003cp\u003eMost multi-material systems (including the Prusa MMU) route multiple filaments through a single hotend, switching by retracting one and advancing another. This approach produces a mixing zone during transitions and requires purging a significant volume of filament to achieve clean colour changes — particularly with materials that have different melt characteristics. The XL's tool changer is architecturally different: each toolhead is independent, with its own hotend, heater, sensor, and extruder. When the printer switches materials, it docks the current toolhead and picks up the next. There is no shared melt zone, no cross-contamination, and the purge requirement per transition is fundamentally lower. The practical result is cleaner interfaces between materials — including support interfaces — and the ability to mix materials with very different processing temperatures (e.g. 250°C Nylon support removal with 220°C PETG main body) without compromise.\u003c\/p\u003e\n\n\u003ch2\u003eSegmented Heated Bed\u003c\/h2\u003e\n\u003cp\u003eThe XL's 360×360mm bed is divided into independent heating zones. Rather than heating the entire bed to temperature for small prints (wasting energy and extending warm-up time), only the zones covering the active print area are heated. This also reduces thermal stress on the bed surface during large prints where even heating across a 360mm span would otherwise be difficult to achieve with a single heater element.\u003c\/p\u003e\n\n\u003ch2\u003e1, 2, or 5 Toolheads — Which to Choose\u003c\/h2\u003e\n\u003cp\u003eThe XL is available with 1, 2, or 5 toolheads at purchase, with additional toolheads addable later. The \u003cstrong\u003e1-toolhead configuration\u003c\/strong\u003e gives you a large-format single-material printer with CoreXY kinematics — a valid choice if your primary need is the build volume rather than multi-material capability. The \u003cstrong\u003e2-toolhead configuration\u003c\/strong\u003e is the most practical starting point for multi-material: dual-colour prints and soluble\/breakaway support in a second material. The \u003cstrong\u003e5-toolhead configuration\u003c\/strong\u003e enables full multi-colour or multi-material prints with up to five different filaments per job.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG, ASA, ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e PC Blend, PA-11, PA-12, PA-CF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU (direct drive per head handles flexible reliably)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoluble supports:\u003c\/strong\u003e BVOH, PVA (with compatible pairing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct designers needing multi-colour or multi-material prototypes with clean material interfaces and soluble support removal\u003c\/li\u003e\n\u003cli\u003eEngineers printing large-format single-piece structural parts that exceed standard desktop printer capacity\u003c\/li\u003e\n\u003cli\u003eArtists and studios producing complex multi-colour prints where filament-switcher purge waste is prohibitive\u003c\/li\u003e\n\u003cli\u003eAdvanced makers and professionals who want Prusa's ecosystem and open-source approach in a large-format multi-material platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official Prusa Research reseller based in Cantabria, Spain. Available with 1, 2, or 5 toolheads. EU warranty and support included.\u003c\/p\u003e","brand":"Prusa Research","offers":[{"title":"1 - Toolhead","offer_id":50369202749767,"sku":"PRU-XL-1T-3D-PRN","price":2399.0,"currency_code":"EUR","in_stock":true},{"title":"2 - Toolheads","offer_id":50369202782535,"sku":"PRU-XL-2T-3D-PRN","price":3099.0,"currency_code":"EUR","in_stock":true},{"title":"5 - Toolheads","offer_id":50369202815303,"sku":"PRU-XL-5T-3D-PRN","price":4099.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/original-prusa-xl-fully-assembled-3d-printer-open-793.webp?v=1763066398"},{"product_id":"prusa-core-one","title":"Prusa Core One Plus +","description":"\u003cp\u003eThe Prusa CORE One+ is Prusa Research's fully enclosed CoreXY 3D printer, designed to bridge the gap between hobbyist bed-slingers and professional enclosed systems. With a 250×220×270 mm build volume, active chamber heating to 55°C, and the Nextruder direct drive extruder, the CORE One+ handles engineering materials — ASA, PC, Nylon, PA-CF — that the MK4S can print but that benefit significantly from a warm, stable chamber environment. Available fully assembled or as a kit.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY kinematics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e250 × 220 × 270 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax chamber temperature\u003c\/td\u003e\n\u003ctd\u003e55°C (active heating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e290°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder\u003c\/td\u003e\n\u003ctd\u003eNextruder — direct drive, load cell auto-levelling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eAll-steel exoskeleton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eFully enclosed — active temperature regulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Shaper\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eEthernet, Wi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote monitoring\u003c\/td\u003e\n\u003ctd\u003ePrusa Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eOpen-source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable as\u003c\/td\u003e\n\u003ctd\u003eFully assembled or kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy CoreXY and Why It Matters Here\u003c\/h2\u003e\n\u003cp\u003eIn a traditional Cartesian printer (MK4S, MINI+), the print bed moves back and forth on the Y axis, carrying the weight of the print as it grows. This limits practical print speeds and causes quality degradation on tall prints as mass increases. In the CORE One+'s CoreXY design, the toolhead moves in both X and Y while the bed moves only vertically — dramatically reducing moving mass. Combined with an all-steel frame and active chamber heating, this allows the CORE One+ to print faster than the MK4S, with better quality at speed, and with consistent results on prints that would be problematic in open-air machines.\u003c\/p\u003e\n\n\u003ch2\u003e55°C Active Chamber Heating\u003c\/h2\u003e\n\u003cp\u003eMany printers are technically enclosed but passively heated — the chamber warms up from the bed's residual heat. The CORE One+ actively heats the chamber to a set temperature, maintaining it throughout the print. At 55°C, materials like ASA and PC Blend print with dramatically reduced warping and delamination risk. The system also intelligently manages PLA and PETG printing with the door closed — detecting when chamber temperature is rising too high and adjusting accordingly, so you don't need to open the door to print standard materials.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG — printable with door closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e ASA, ABS, PC Blend, PA-11, PA-12, PA-GF, PA-CF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-performance:\u003c\/strong\u003e PEEK, PEI (with HT Hotend upgrade)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU (direct drive handles flexible filaments reliably)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite:\u003c\/strong\u003e Carbon-fibre-filled and glass-fibre-filled materials (hardened nozzle required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEngineers and product designers who regularly print in ASA, PC, or Nylon and need reliable warping-free results\u003c\/li\u003e\n\u003cli\u003eProfessional prototyping studios requiring faster print speeds and better quality-at-speed than a bed-slinger offers\u003c\/li\u003e\n\u003cli\u003eMakers stepping up from the MK4S who need enclosure capability without moving to industrial pricing\u003c\/li\u003e\n\u003cli\u003eSmall batch manufacturers producing functional parts in technical materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official Prusa Research reseller based in Cantabria, Spain. Available assembled (€1,399) or as a kit (€1,099). EU warranty and support included.\u003c\/p\u003e","brand":"Prusa Research","offers":[{"title":"Assembled","offer_id":52470317285703,"sku":"PRU-CR-ONE-3D-PRN","price":1399.0,"currency_code":"EUR","in_stock":true},{"title":"Kit","offer_id":52470317318471,"sku":"PRU-CR-ONE-KIT-3D-PRN","price":1099.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/prusa-core-one-plus-3d-printer-orange-603.webp?v=1764878420"},{"product_id":"prusa-pro-ht90","title":"Prusa Pro HT90","description":"\u003cp\u003eThe Prusa Pro HT90 is a professional delta FDM 3D printer built around one capability that most desktop machines cannot offer: a fully enclosed chamber that heats to 90°C. That single feature unlocks a class of engineering materials — PEEK, PEKK, PPS, PSU, PEI (Ultem) — that previously required industrial machines costing five to ten times more. The HT90 brings them into reach for engineering teams, R\u0026amp;D labs, medical device companies, and serious professionals.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003eØ300 × 400 mm (cylindrical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKinematics\u003c\/td\u003e\n\u003ctd\u003eDelta\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChamber temperature\u003c\/td\u003e\n\u003ctd\u003eUp to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003eUp to 500°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint heads included\u003c\/td\u003e\n\u003ctd\u003e2 — High-Flow and High-Temperature (swappable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003eHEPA air recirculation built in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eOnline and offline operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResonance compensation\u003c\/td\u003e\n\u003ctd\u003eInput Shaper technology\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder type\u003c\/td\u003e\n\u003ctd\u003eDirect drive with load cell sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003e90°C Chamber — Why It Matters\u003c\/h2\u003e\n\u003cp\u003eWarping, layer delamination, and internal stress in engineering materials are almost always caused by thermal gradients — the part cools unevenly as it's being printed. A heated chamber eliminates this by maintaining uniform ambient temperature around the part throughout the print. At 90°C, the HT90 creates the right thermal environment for high-performance polymers that require it, while also significantly improving results with mid-range materials like ABS, ASA, PA, and PCCF that benefit from reduced thermal stress even if they don't strictly require a heated chamber.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial class\u003c\/th\u003e\n\u003cth\u003eExamples\u003c\/th\u003e\n\u003cth\u003eChamber required\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, PLA HS\u003c\/td\u003e\n\u003ctd\u003eNo — chamber can be open or closed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngineering\u003c\/td\u003e\n\u003ctd\u003eABS, ASA, PA, PA-CF, PCCF\u003c\/td\u003e\n\u003ctd\u003eRecommended — reduces warping and delamination\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-performance\u003c\/td\u003e\n\u003ctd\u003ePEEK, PEKK, PPS, PSU, PES, PEI (Ultem)\u003c\/td\u003e\n\u003ctd\u003eRequired — chamber at 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 500°C capable nozzle handles the most demanding engineering polymers with no hardware modifications required. Both print heads are included in the box — no additional purchases needed to access high-temperature capability.\u003c\/p\u003e\n\n\u003ch2\u003eDual Swappable Print Heads\u003c\/h2\u003e\n\u003cp\u003eThe HT90 ships with two specialised heads that swap without tools:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Flow Head\u003c\/strong\u003e — optimised for standard and mid-range materials at high speeds. Input Shaper resonance compensation enables rapid prototyping without sacrificing surface quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Temperature Head\u003c\/strong\u003e — engineered for materials requiring nozzle temperatures up to 500°C. Compatible with all high-performance engineering polymers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSwitching heads takes minutes and requires no recalibration — the load cell sensor handles automatic first layer calibration on every print.\u003c\/p\u003e\n\n\u003ch2\u003eHEPA Filtration\u003c\/h2\u003e\n\u003cp\u003ePrinting PEEK, Ultem, and similar high-performance polymers generates VOCs and ultrafine particles. The HT90's built-in air recirculation system with HEPA filtration continuously purifies the chamber air during printing, reducing exposure to harmful emissions. This is not an optional add-on — it is integrated into the machine and active whenever the chamber is in use.\u003c\/p\u003e\n\n\u003ch2\u003eDelta Kinematics\u003c\/h2\u003e\n\u003cp\u003eThe delta configuration — three arms moving a central print head — enables faster movement speeds and a large cylindrical build volume that suits tall, round, and rotationally symmetric parts particularly well. The Ø300mm diameter and 400mm height accommodate industrial-scale prototypes in a single print. Delta printers also have fewer moving parts in the XY plane than Cartesian machines, which contributes to the mechanical precision the HT90 maintains across its full build volume.\u003c\/p\u003e\n\n\u003ch2\u003eWho the HT90 Is For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering and R\u0026amp;D teams\u003c\/strong\u003e printing functional prototypes in PEEK, PA-CF, or PPS that need to survive real operating conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedical device companies\u003c\/strong\u003e requiring biocompatible, autoclave-sterilisable materials such as PEEK and PEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomotive and aerospace\u003c\/strong\u003e prototyping where parts must meet thermal and mechanical requirements, not just look right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial tooling\u003c\/strong\u003e — jigs, fixtures, and end-of-arm tooling in high-temperature resistant polymers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversity and research labs\u003c\/strong\u003e needing professional-grade material capability without industrial machine budgets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an authorised Prusa reseller based in Cantabria, Spain, serving customers across Europe. We stock the Prusa Pro HT90 with full manufacturer warranty and EU-compliant support.\u003c\/p\u003e","brand":"Prusa Research","offers":[{"title":"Default Title","offer_id":51472689594695,"sku":"PRU-HT-90-3D-PRN","price":12599.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/prusa-pro-ht90-delta-style-3d-printer-461.webp?v=1763066133"},{"product_id":"flashforge-guider-3-ultra","title":"Flashforge Guider 3 Ultra","description":"\u003cp\u003eThe Flashforge Guider 3 Ultra is a professional large-format enclosed FDM 3D printer designed for industrial, engineering, and production environments where build volume, speed, and reliability all need to operate at scale simultaneously. With a 350×350×600 mm build volume — the largest Z-height in the Flashforge lineup — 500 mm\/s maximum print speed, CoreXY motion, and dual-layer HEPA 13 + activated carbon filtration, it is the correct machine for batch production of large functional parts, end-use components, and tall engineering assemblies that exceed desktop printer capacity.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY, fully enclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e350 × 350 × 600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax print speed\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax acceleration\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e350°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ-axis\u003c\/td\u003e\n\u003ctd\u003eDual ball screw — reinforced for stability on tall prints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003eDual-layer HEPA 13 + activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle options\u003c\/td\u003e\n\u003ctd\u003e0.4 mm, 0.6 mm, 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e7-inch colour touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed levelling\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eAluminium chassis — industrial grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, Ethernet, USB — remote management\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament monitoring\u003c\/td\u003e\n\u003ctd\u003eRunout detection and auto-resume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003e350×350×600 mm — Why the Z-Height Matters\u003c\/h2\u003e\n\u003cp\u003eMost desktop and prosumer printers cap out at 250–300 mm Z-height. The Guider 3 Ultra's 600 mm Z-height changes the category of parts that can be printed without splitting. Full-size automotive trim components, tall architectural models, large industrial fixtures, 600mm-height batch towers for small parts — these require either a machine with this Z capacity or an assembly step. The dual ball screw Z-axis ensures that the 600mm travel stays accurate and stable, without the wobble and deviation that single-lead-screw systems exhibit at extended heights.\u003c\/p\u003e\n\n\u003ch2\u003e350°C Nozzle — Engineering Material Range\u003c\/h2\u003e\n\u003cp\u003eThe 350°C nozzle temperature ceiling covers the full range of engineering thermoplastics: PLA, PETG, ABS, ASA, PA-12 Nylon, PA-CF, PEEK, PEI\/Ultem, and PC. Combined with the enclosed chamber and 120°C bed, the Guider 3 Ultra handles the same material set as dedicated high-temperature desktop systems, in a platform sized for production volumes.\u003c\/p\u003e\n\n\u003ch2\u003eHEPA 13 + Carbon Filtration\u003c\/h2\u003e\n\u003cp\u003eHEPA 13 is the standard used in medical and cleanroom environments — it captures 99.95% of particles ≥0.3 microns. Combined with activated carbon for VOC and odour adsorption, the dual-layer system makes the Guider 3 Ultra appropriate for office buildings, shared workspaces, and facilities where fume management is a regulatory or health requirement. Printing ABS, ASA, or Nylon all day in an unfiltered machine is not acceptable in many commercial environments; HEPA 13 filtration is.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG, ABS, ASA, HIPS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e PA-12 Nylon, PA-CF, PC Blend, CPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-performance:\u003c\/strong\u003e PEEK, PEI\/Ultem (up to 350°C nozzle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite:\u003c\/strong\u003e Carbon-fibre and glass-fibre filled materials (hardened nozzle required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIndustrial design teams producing large-format prototypes and end-use parts that exceed standard desktop printer capacity\u003c\/li\u003e\n\u003cli\u003eEngineering departments running continuous production of functional components in Nylon, PC, and CF-filled materials\u003c\/li\u003e\n\u003cli\u003eAutomotive and aerospace prototyping teams requiring tall assemblies and large structural parts in a single print\u003c\/li\u003e\n\u003cli\u003eManufacturing facilities needing a certified-filtration enclosed machine for compliance with workplace air quality standards\u003c\/li\u003e\n\u003cli\u003eProfessional service bureaux running high-throughput FDM production across a range of engineering materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an authorised Flashforge reseller based in Cantabria, Spain, serving industrial and professional customers across Europe. EU warranty and support included.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":51940395614535,"sku":"FLF-GDR-3-ULT-3D-PRN","price":4199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-guider-3-ultra-black-enclosed-3d-983.webp?v=1752755782"},{"product_id":"bambu-lab-h2d","title":"Bambu Lab H2D","description":"\u003cp\u003eThe \u003cstrong\u003eBambu Lab H2D\u003c\/strong\u003e is Bambu Lab's most advanced desktop 3D printer — a large-format, dual-nozzle powerhouse designed for creators, engineers, and educators who need the ultimate in material versatility and print precision. With a \u003cstrong\u003e350 × 320 × 325 mm build volume\u003c\/strong\u003e, a \u003cstrong\u003etrue dual-nozzle system\u003c\/strong\u003e, and an \u003cstrong\u003eactively heated 65°C chamber\u003c\/strong\u003e, the H2D handles everything from everyday PLA to demanding engineering filaments like PA-CF, PPS, and PC — all in one machine.\u003c\/p\u003e\u003cp\u003eThe dual-nozzle architecture enables two key capabilities unavailable on single-nozzle printers: \u003cstrong\u003etrue multi-material printing\u003c\/strong\u003e (e.g. PLA + TPU in a single job) and \u003cstrong\u003esoluble support printing\u003c\/strong\u003e (e.g. using PVA supports that dissolve in water for complex geometries with no cleanup). Combined with 5μm optical motion calibration and a closed-loop PMSM servo extruder, the H2D delivers exceptional surface quality and dimensional accuracy at speeds up to 600 mm\/s.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 350 × 320 × 325 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e up to 600 mm\/s \/ 20,000 mm\/s² acceleration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzles:\u003c\/strong\u003e dual — main nozzle + auxiliary nozzle for true multi-material and soluble support printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temp:\u003c\/strong\u003e 350°C all-metal hardened steel, tool-free quick-swap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber:\u003c\/strong\u003e actively heated to 65°C for engineering filament stability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 120°C dual-sided magnetic flexible PEI plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 5μm optical motion calibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtruder:\u003c\/strong\u003e closed-loop PMSM servo for real-time clog detection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-colour:\u003c\/strong\u003e up to 16 colours with AMS 2 Pro (included in AMS Combo)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e activated carbon + HEPA for safe ABS\/ASA\/PA printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e 5\" full-colour touchscreen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional modules:\u003c\/strong\u003e 10W\/40W laser engraving and digital cutting (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 200–240V — compatible across Europe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e dual-band Wi-Fi, Bambu Studio, Bambu Handy app\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAMS Combo includes the AMS 2 Pro\u003c\/strong\u003e — Bambu Lab's second-generation Automatic Material System with active filament drying, improved routing, and support for up to 16 colour or material changes per print. Essential for multi-material and multi-colour engineering projects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the H2D differ from the H2S?\u003c\/strong\u003e The H2D features a \u003cstrong\u003edual nozzle\u003c\/strong\u003e — allowing simultaneous use of two materials (e.g. PLA + soluble PVA supports) in a single print. The H2S is a single-nozzle variant of the same machine: same build volume, same chamber heating, lower price. If you need soluble supports or true two-material extrusion, the H2D is the choice. If single-nozzle with AMS multi-colour is sufficient, the H2S offers excellent value.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible filaments:\u003c\/strong\u003e PLA, PETG, TPU, ABS, ASA, PA (Nylon), PC, PET, PPS, PVA, BVOH, and carbon- or glass-fibre reinforced variants (PA-CF, PETG-CF, PLA-CF, ABS-GF).\u003c\/p\u003e\u003cp\u003eThe Bambu Lab H2D is where desktop 3D printing meets professional fabrication capability — built to expand what is possible on your workbench.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"AMS Combo","offer_id":51947816681799,"sku":"BLB-H2D-C-3D-PRN","price":2799.0,"currency_code":"EUR","in_stock":true},{"title":"H2D","offer_id":51947816714567,"sku":"BLB-H2D-3D-PRN","price":2449.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/bambu-lab-h2d-silver-black-3d-181.webp?v=1753011738"},{"product_id":"prusa-core-one-ultimate-edition","title":"Prusa Core One Plus + Ultimate Edition","description":"\u003cp\u003eThe Prusa CORE One+ Ultimate Edition is the fully equipped configuration of Prusa's enclosed CoreXY 3D printer, combining the CORE One+ hardware with a curated set of accessories that extend its material capability and day-to-day usability. It includes the Advanced Filtration System — an active carbon and HEPA filtration unit that captures VOCs and particulates from the enclosed chamber — making it the appropriate choice for office and laboratory environments where air quality matters when printing engineering materials.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY kinematics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e250 × 220 × 270 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax chamber temperature\u003c\/td\u003e\n\u003ctd\u003e55°C (active heating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e290°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder\u003c\/td\u003e\n\u003ctd\u003eNextruder — direct drive, load cell auto-levelling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eAll-steel exoskeleton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003eAdvanced Filtration System (carbon + HEPA) — included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Shaper\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eEthernet, Wi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote monitoring\u003c\/td\u003e\n\u003ctd\u003ePrusa Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable as\u003c\/td\u003e\n\u003ctd\u003eFully assembled or kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eUltimate Edition vs Standard CORE One+\u003c\/h2\u003e\n\u003cp\u003eThe CORE One+ Ultimate Edition includes everything in the standard CORE One+ plus the Advanced Filtration System and additional accessories. The filtration system is the key differentiator for office and shared workspace use — when printing ASA, ABS, or Nylon in an enclosed chamber, the machine produces VOCs and fine particles that are concentrated inside the enclosure and released when it opens. The active filtration system captures these before they enter the room, making high-temperature material printing practical in environments where open windows or fume hoods are not available.\u003c\/p\u003e\n\n\u003ch2\u003eAdvanced Filtration System\u003c\/h2\u003e\n\u003cp\u003eThe included filtration system uses a combination of activated carbon (for VOC and odour capture) and HEPA filtration (for particulate matter). It mounts directly to the CORE One+ enclosure and activates automatically during printing. For offices, design studios, dental labs, and educational environments where PC, ASA, ABS, and Nylon are regularly printed, this is the most complete out-of-box configuration available for the CORE One+ platform.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG — with door closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e ASA, ABS, PC Blend, PA-11, PA-12, PA-GF, PA-CF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-performance:\u003c\/strong\u003e PEEK, PEI (with optional HT Hotend upgrade)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite:\u003c\/strong\u003e Carbon-fibre and glass-fibre filled materials (hardened nozzle required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOffice and laboratory environments printing engineering materials where VOC and particle control is required\u003c\/li\u003e\n\u003cli\u003eDesign studios and engineering teams wanting the complete CORE One+ setup with no additional purchases needed\u003c\/li\u003e\n\u003cli\u003eEducational institutions needing safe, filtered enclosed printing for student use\u003c\/li\u003e\n\u003cli\u003eProfessionals who print ASA, ABS, or Nylon regularly and want to do so without fume management concerns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official Prusa Research reseller based in Cantabria, Spain. Available assembled (€1,799) or as a kit (€1,499). EU warranty and support included.\u003c\/p\u003e","brand":"Prusa Research","offers":[{"title":"Assembled","offer_id":52470902980935,"sku":"PRU-CR-ONE-ULT-3D-PRN","price":1799.0,"currency_code":"EUR","in_stock":true},{"title":"Kit","offer_id":52470903013703,"sku":"PRU-CR-ONE-KIT-ULT-3D-PRN","price":1499.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/prusa-core-one-ultimate-edition-3d-printer-accessories-294.webp?v=1759586566"},{"product_id":"bambu-lab-p2s","title":"Bambu Lab P2S","description":"\u003cp\u003eThe \u003cstrong\u003eBambu Lab P2S\u003c\/strong\u003e is the fully enclosed, mid-range CoreXY 3D printer that sets the new benchmark for speed, reliability, and ease of use. Launched in October 2025, it is the direct successor to the P1S and sits at the heart of Bambu Lab's lineup — above the open-frame A series for those who need enclosure and high-temperature capability, and below the H2 series for everyday professional use.\u003c\/p\u003e\n\n\u003cp\u003eAt its core, the P2S is driven by a \u003cstrong\u003ePMSM servo extruder (DynaSense)\u003c\/strong\u003e, delivering 8.5 kg of extrusion force — 70% more than its predecessor — with 20 kHz position sampling for real-time clog and grinding detection. Paired with a \u003cstrong\u003e300°C hardened steel quick-swap nozzle\u003c\/strong\u003e and a \u003cstrong\u003e110°C heated bed\u003c\/strong\u003e, the P2S handles PLA, PETG, TPU, ABS, ASA, PA, PC, and carbon- or glass-fibre reinforced filaments without hesitation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 256 × 256 × 256 mm — plenty of room for functional parts, terrain, and multi-part assemblies\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e up to 600 mm\/s peak \/ 20,000 mm\/s² acceleration\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtruder:\u003c\/strong\u003e PMSM servo (DynaSense) — 70% more force than P1S, detects clogs in real time at 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 300°C hardened steel, tool-free quick-swap magnetic mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 110°C magnetic flexible textured PEI plate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e 5\" full-colour touchscreen with second-generation Bambu UI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-colour:\u003c\/strong\u003e up to 16 colours with AMS 2 Pro (included in Combo)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMonitoring:\u003c\/strong\u003e built-in chamber camera, AI failure detection (spaghetti, air printing, nozzle clumping)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e HEPA + activated carbon for safe ABS\/ASA printing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e fully automatic — bed levelling, flow dynamics, vibration compensation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e dual-band Wi-Fi, Bambu Studio, Bambu Handy app\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eAMS Combo includes the AMS 2 Pro\u003c\/strong\u003e — Bambu Lab's second-generation Automatic Material System with active filament drying and smoother multi-material management. Perfect for multi-colour prints or printing with multiple filament types in a single job.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible filaments:\u003c\/strong\u003e PLA, PETG, TPU, ABS, ASA, PA (Nylon), PC, PVA, BVOH, and carbon- or glass-fibre reinforced variants.\u003c\/p\u003e\n\n\u003cp\u003eWhether you are printing functional engineering prototypes, detailed figurines, or multi-colour cosplay props, the Bambu Lab P2S delivers the reliability and print quality to match your ambition — straight out of the box.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"AMS Combo","offer_id":52536709480775,"sku":"BLB-P2S-C-3D-PRN","price":899.0,"currency_code":"EUR","in_stock":true},{"title":"P2S","offer_id":52536709513543,"sku":"BLB-P2S-3D-PRN","price":649.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/bambu-lab-p2s-combo-gray-3d-printer-476.webp?v=1760475514"},{"product_id":"bambu-lab-h2s","title":"Bambu Lab H2S","description":"\u003cp\u003eThe \u003cstrong\u003eBambu Lab H2S\u003c\/strong\u003e is the large-format, high-performance CoreXY 3D printer that makers and engineers have been waiting for. Launched in August 2025 as the single-nozzle variant of the flagship H2 series, the H2S delivers all the speed, build volume, and material versatility of its dual-nozzle sibling (the H2D) — in a more accessible, streamlined package.\u003c\/p\u003e\n\n\u003cp\u003eWith a \u003cstrong\u003e340 × 320 × 340 mm build volume\u003c\/strong\u003e (120% larger than the X1 Carbon), a \u003cstrong\u003e350°C all-metal hotend\u003c\/strong\u003e, and a \u003cstrong\u003e65°C actively heated chamber\u003c\/strong\u003e, the H2S is built for the full spectrum of engineering-grade filaments: from everyday PLA and PETG right through to reinforced PA-CF, PPS, and PC. Its closed-loop PMSM servo extruder samples at 20 kHz for real-time clog detection, and its AI vision system watches every print from start to finish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 340 × 320 × 340 mm — 120% larger than the X1 Carbon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e up to 1,000 mm\/s peak \/ 20,000 mm\/s² acceleration\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtruder:\u003c\/strong\u003e closed-loop PMSM servo — high-force extrusion, 20 kHz real-time clog detection\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 350°C all-metal hardened steel, tool-free quick-swap magnetic mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamber:\u003c\/strong\u003e actively heated to 65°C for engineering filament stability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 120°C dual-sided magnetic flexible PEI plate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 5μm optical motion calibration\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMonitoring:\u003c\/strong\u003e 23 sensors + 3 cameras — AI failure detection (spaghetti, nozzle clumping, air printing)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-colour:\u003c\/strong\u003e compatible with up to 4× AMS 2 Pro + 8× AMS HT (up to 24 colours)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e activated carbon + HEPA filter for safe enclosed printing of ABS\/ASA\/PA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e 5\" full-colour touchscreen\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptional modules:\u003c\/strong\u003e 10W\/40W laser engraving and digital cutting (sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e dual-band Wi-Fi, Bambu Studio, Bambu Handy app\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow does the H2S differ from the H2D?\u003c\/strong\u003e The H2S uses a single nozzle rather than the H2D's dual-nozzle system, making it simpler to maintain and more cost-effective for users who do not need dedicated dual-material extrusion. It shares the same build volume, chamber heating, servo extruder technology, and speed as the H2D — at a lower entry price. If you need true dual-nozzle printing (e.g. soluble supports with PVA), the H2D is the choice. If you want the H2 series' industrial-grade capability in a single-nozzle format, the H2S is the one.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAMS Combo includes the AMS 2 Pro\u003c\/strong\u003e — Bambu Lab's second-generation Automatic Material System with active filament drying, improved routing, and support for up to 4 colour changes per slot. Ideal for multi-colour engineering projects and prototypes.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible filaments:\u003c\/strong\u003e PLA, PETG, TPU, ABS, ASA, PA (Nylon), PC, PET, PPS, PVA, BVOH, and carbon- or glass-fibre reinforced variants (PA-CF, PETG-CF, PLA-CF, ABS-GF).\u003c\/p\u003e\n\n\u003cp\u003eThe H2S is built for serious makers, engineers, and educators who need large-format, high-temperature printing they can rely on — day in, day out.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"AMS Combo","offer_id":52532987527495,"sku":"BLB-H2S-C-3D-PRN","price":1849.0,"currency_code":"EUR","in_stock":true},{"title":"H2S","offer_id":52532987560263,"sku":"BLB-H2S-3D-PRN","price":1549.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/bambu-lab-h2s-3d-printer-multi-filament-923.webp?v=1760478048"},{"product_id":"prusa-core-one-l","title":"Prusa Core One L","description":"\u003cp\u003eThe Prusa CORE One L is the large-format variant of Prusa's enclosed CoreXY platform. With a 300×300×330 mm build volume — roughly 60% more capacity than the CORE One+ — the CORE One L is designed for users who regularly need to print larger single-piece parts, higher-volume batches, or taller objects that exceed what standard desktop printers can accommodate. It combines the CORE One+'s active 60°C chamber heating, Nextruder direct drive extruder, and all-steel construction in a larger frame.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY kinematics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e300 × 300 × 330 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax chamber temperature\u003c\/td\u003e\n\u003ctd\u003e60°C (active heating — AC convection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e290°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e120°C (AC heated bed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder\u003c\/td\u003e\n\u003ctd\u003eNextruder — direct drive, load cell auto-levelling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eAll-steel exoskeleton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eFully enclosed — active AC convection heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Shaper\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eEthernet, Wi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote monitoring\u003c\/td\u003e\n\u003ctd\u003ePrusa Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eOpen-source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCORE One L vs CORE One+ — Which to Choose\u003c\/h2\u003e\n\u003cp\u003eThe CORE One L and CORE One+ share the same CoreXY architecture, Nextruder extruder system, and material capability. The differences are size and chamber heating method. The CORE One L's 300×300×330 mm volume is the relevant upgrade for: printing large housing components or enclosures that won't fit in 250×220×270mm; running larger print batches per cycle to increase throughput; printing tall objects (over 270mm high) that require the extra Z height. The CORE One L also uses AC convection heating for the chamber and bed — an industrial-grade heating approach that reaches and maintains 60°C more efficiently than the CORE One+'s system at the larger scale.\u003c\/p\u003e\n\n\u003ch2\u003e60°C Active Chamber — AC Convection\u003c\/h2\u003e\n\u003cp\u003eThe CORE One L's chamber heating system uses mains-powered AC convection — the same approach used in industrial FDM printers. This provides more stable and even heat distribution across the larger chamber volume compared to DC-powered systems, and reaches operating temperature faster. At 60°C, the CORE One L handles ASA, ABS, PC Blend, and Nylon with excellent warping resistance, and maintains consistent inter-layer adhesion throughout tall prints where temperature gradients would otherwise cause layer separation.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG — printable with door closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e ASA, ABS, PC Blend, PA-11, PA-12, PA-GF, PA-CF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-performance:\u003c\/strong\u003e PEEK, PEI (with optional HT Hotend upgrade)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite:\u003c\/strong\u003e Carbon-fibre and glass-fibre filled materials (hardened nozzle required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct designers and engineers printing large structural components, housings, or assemblies that exceed standard desktop printer capacity\u003c\/li\u003e\n\u003cli\u003eIndustrial prototyping teams needing volume and chamber stability for engineering materials\u003c\/li\u003e\n\u003cli\u003eSmall manufacturers producing batches of medium to large functional parts in a single print cycle\u003c\/li\u003e\n\u003cli\u003eResearch and development teams requiring a large enclosed platform for material and design testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official Prusa Research reseller based in Cantabria, Spain. EU warranty and support included. Shipping across Europe.\u003c\/p\u003e","brand":"Prusa Research","offers":[{"title":"Default Title","offer_id":52684768051527,"sku":"PRU-CR-ONE-L-3D-PRN","price":1899.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/prusa-core-one-l-3d-printer-orange-677.webp?v=1762256680"},{"product_id":"prusa-pro-slx-msla-3d-printer","title":"Prusa Pro SLX MSLA 3D Printer – Industrial Resin Printer","description":"\u003cp\u003eThe Prusa Pro SLX is Prusa Research's professional MSLA (Masked Stereolithography Apparatus) resin 3D printer, designed for industrial, medical, and engineering applications where photopolymer resin printing needs to operate at scale with process traceability and active chamber heating. It fills a specific gap in the desktop-to-industrial resin market: larger build volume than typical desktop MSLA printers, active chamber heating for viscous industrial and medical resins, automatic resin handling, and a complete certified ecosystem (SLX printer, WX washing machine, CX curing station) designed to minimise operator contact with resin and solvents throughout the workflow.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eMSLA — Masked Stereolithography (resin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight source\u003c\/td\u003e\n\u003ctd\u003eUV LCD — monochrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChamber heating\u003c\/td\u003e\n\u003ctd\u003eActive — enables highly viscous and highly filled resins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin handling\u003c\/td\u003e\n\u003ctd\u003eAutomatic refill system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelease mechanism\u003c\/td\u003e\n\u003ctd\u003eTilt mechanism — reduces peel forces, improves reliability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlatform system\u003c\/td\u003e\n\u003ctd\u003eQuick-swap print platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety\u003c\/td\u003e\n\u003ctd\u003eCarbon filtration, door locking during operation, contactless resin handling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcess tracking\u003c\/td\u003e\n\u003ctd\u003eResin type, volume, wash and cure time — full workflow documentation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eEthernet, Wi-Fi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEcosystem\u003c\/td\u003e\n\u003ctd\u003eSLX printer + WX Washing Machine + CX Curing Station\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eMSLA vs FDM — When Resin Is the Right Choice\u003c\/h2\u003e\n\u003cp\u003eMSLA printers cure each layer as a complete image across the full build platform simultaneously, unlike FDM which deposits material point by point. This means layer time is independent of the number or size of objects on the build plate — a full plate of dental models takes the same time per layer as a single model. The resolution available from MSLA is also fundamentally higher than achievable with FDM: features below 0.1mm that are impossible to reproduce in filament are routine in resin. The trade-off is material handling: resins require post-processing (washing and curing), appropriate ventilation, and safe disposal. The SLX's ecosystem is designed to manage all of these safely and with minimal direct operator contact.\u003c\/p\u003e\n\n\u003ch2\u003eActive Chamber Heating\u003c\/h2\u003e\n\u003cp\u003eStandard desktop MSLA printers operate at room temperature, which limits them to low-viscosity photopolymer resins. Industrial and medical resins are often highly viscous or highly filled — they require elevated temperature to flow properly and achieve correct layer adhesion. The SLX's active chamber heating keeps the resin at the correct processing temperature throughout the print, enabling materials that simply cannot run on unheated machines. This is the feature that positions the SLX for dental, medical device, and engineering part applications requiring certified industrial resins.\u003c\/p\u003e\n\n\u003ch2\u003eThe SLX Ecosystem\u003c\/h2\u003e\n\u003cp\u003eThe SLX is designed to be used with the complete Prusa Pro ecosystem:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSLX Printer\u003c\/strong\u003e — high-precision MSLA with heated chamber, automatic resin handling, tilt mechanism\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWX Washing Machine\u003c\/strong\u003e — automated two-cycle wash with pressurised spray gun, designed for contactless solvent handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCX Curing Station\u003c\/strong\u003e — uniform UV curing with smart presets ensuring consistent cure across the build\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTogether these three units form a complete, validated resin workflow from raw print to finished cured part, with minimal operator exposure to uncured resin and solvents at every stage.\u003c\/p\u003e\n\n\u003ch2\u003eProcess Traceability\u003c\/h2\u003e\n\u003cp\u003eThe SLX tracks resin type, resin volume consumed, wash times, and cure times — generating a process record for each job. For applications in regulated industries (dental, medical device, aerospace) where proof of correct manufacturing process is required for quality assurance or regulatory compliance, this documentation capability is a functional requirement rather than a convenience feature.\u003c\/p\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDental laboratories producing surgical guides, models, and prosthetic components in certified dental resins\u003c\/li\u003e\n\u003cli\u003eMedical device manufacturers requiring traceable resin printing for prototyping and small-batch production\u003c\/li\u003e\n\u003cli\u003eIndustrial engineering teams needing high-resolution functional prototypes in technical photopolymers\u003c\/li\u003e\n\u003cli\u003eResearch institutions working with specialised filled or viscous resins that require heated chamber operation\u003c\/li\u003e\n\u003cli\u003eProduction environments where operator safety and minimal resin contact throughout the workflow is a priority\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official Prusa Research reseller based in Cantabria, Spain, with specialist experience in professional 3D printing for industrial and medical customers across Europe. EU warranty included. Contact us to discuss your specific application and material requirements before ordering.\u003c\/p\u003e","brand":"Prusa Research","offers":[{"title":"Default Title","offer_id":52815773630791,"sku":"PRU-SLX-3D-PRN","price":30999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/prusa-pro-slx-msla-3d-printer-industrial-resin-black-617.webp?v=1763930175"},{"product_id":"bambu-lab-x2d","title":"Bambu Lab X2D","description":"\u003cp\u003eThe Bambu Lab X2D is a dual-nozzle enclosed FDM 3D printer designed for users who regularly print with support materials, multi-material combinations, or engineering filaments. Where most desktop printers rely on a single nozzle for both the part and its supports — requiring the same material for both, which limits clean removal — the X2D dedicates one nozzle to the part and a second to the support structure. This changes the quality ceiling on complex geometry: supports in PVA, BVOH, or HIPS dissolve or peel cleanly away from surfaces that would otherwise require manual work and leave marks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY, fully enclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003eMain nozzle: 256 × 256 × 260 mm \/ Dual nozzle: 235.5 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e300°C (per nozzle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax chamber temperature\u003c\/td\u003e\n\u003ctd\u003e65°C (active heating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle system\u003c\/td\u003e\n\u003ctd\u003eDual nozzle — independent main + auxiliary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed surface\u003c\/td\u003e\n\u003ctd\u003eTextured PEI build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003e3-stage — G3 pre-filter + H12 HEPA + activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensors\u003c\/td\u003e\n\u003ctd\u003e31 across the system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eBelow 50 dB (typical conditions, active motor noise cancelling)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMonitoring\u003c\/td\u003e\n\u003ctd\u003eAI camera — start checks and in-print failure detection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, LAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariants\u003c\/td\u003e\n\u003ctd\u003eX2D (printer only) \/ X2D AMS Combo (includes AMS 2 Pro)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDual Nozzle — How It Changes Support Printing\u003c\/h2\u003e\n\u003cp\u003eA single-nozzle multi-material setup switches filaments within the same nozzle — meaning both the part material and the support material pass through the same hotend and require purging between transitions. The X2D's dual-nozzle architecture keeps the two materials completely separate: the main nozzle never touches the support filament and vice versa. This eliminates cross-contamination between part and support, reduces purge waste per transition, and allows the two materials to be processed at different temperatures simultaneously — which is essential for pairing materials with very different thermal requirements, such as PETG with BVOH supports or ABS with HIPS.\u003c\/p\u003e\n\n\u003ch2\u003e65°C Active Chamber Heating\u003c\/h2\u003e\n\u003cp\u003eThe actively heated chamber reaches and maintains 65°C throughout the print. For engineering materials — ABS, ASA, PA-CF, and PC in particular — this addresses the root cause of warping and delamination: the temperature gradient between a hot first layer and a cooling ambient environment. At 65°C chamber temperature, even large flat ABS and ASA prints maintain dimensional stability from first layer to last — these are notoriously prone to warping on less thermally stable machines.\u003c\/p\u003e\n\n\u003ch2\u003e300°C Nozzle — Material Range\u003c\/h2\u003e\n\u003cp\u003eThe 300°C nozzle ceiling covers the complete range of common engineering thermoplastics from both nozzles: PLA, PETG, ABS, ASA, PA-12 Nylon, PA-CF, PC Blend, and TPU. Soluble support materials including PVA and BVOH also operate within this range. For the most demanding materials (PEEK, PEI), 300°C is at the lower boundary — but for the vast majority of functional engineering part production, it is sufficient.\u003c\/p\u003e\n\n\u003ch2\u003e3-Stage Filtration\u003c\/h2\u003e\n\u003cp\u003eThe X2D's filtration system captures airborne particles and VOCs at three stages: a G3 pre-filter removes larger particles first, the H12 HEPA layer captures fine particulate matter down to 0.3 microns at 99.5% efficiency, and the activated carbon stage adsorbs VOCs and odours from ABS, ASA, and Nylon printing. This system makes the X2D appropriate for office environments, shared workspaces, and facilities with indoor air quality requirements.\u003c\/p\u003e\n\n\u003ch2\u003eAMS Combo — Automatic Material System\u003c\/h2\u003e\n\u003cp\u003eThe X2D AMS Combo variant includes the AMS 2 Pro multi-material unit. The AMS 2 Pro holds up to 4 filament spools and feeds them to the printer automatically, enabling multi-colour and multi-material jobs from a single filament loading operation. Combined with the X2D's dual nozzle, the AMS Combo is the most complete multi-material configuration: the AMS handles filament switching on the main nozzle while the auxiliary nozzle maintains the support material — allowing complex multi-colour prints with dedicated, cleanly removable supports.\u003c\/p\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEngineers and product designers who print functional parts in ABS, ASA, Nylon, or PC requiring clean support interfaces\u003c\/li\u003e\n\u003cli\u003ePrototyping studios that regularly produce complex geometry requiring soluble or break-away support material\u003c\/li\u003e\n\u003cli\u003eProfessionals who want multi-material printing capability — including PLA + TPU flexible-rigid combinations — without the compromises of single-nozzle purging\u003c\/li\u003e\n\u003cli\u003eOffice and studio environments needing an enclosed, filtered machine for engineering filaments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab X2D printer\u003c\/li\u003e\n\u003cli\u003eTextured PEI build plate\u003c\/li\u003e\n\u003cli\u003eAccessories box\u003c\/li\u003e\n\u003cli\u003eSpool holder\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eAMS 2 Pro included with X2D AMS Combo variant\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints sells genuine, 100% original Bambu Lab products, shipped from Cantabria, Spain. Available as X2D (printer only) or X2D AMS Combo. EU warranty and support included.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"AMS Combo","offer_id":53703408222535,"sku":"BLB-X2D-C-3D-PRN","price":999.0,"currency_code":"EUR","in_stock":true},{"title":"X2D","offer_id":53703408255303,"sku":"BLB-X2D-3D-PRN","price":749.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/bambu-lab-x2d-black-3d-933.webp?v=1776183620"},{"product_id":"flashforge-creator-5-high-speed-multi-colour-3d-printer","title":"Flashforge Creator 5 High-Speed Multi-Colour 3D Printer","description":"\u003cp\u003e\u003cb\u003eHigh-Speed, Zero-Waste Multi-Colour 3D Printing for Innovators\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Flashforge Creator 5 is a next-generation FDM 3D printer engineered to completely transform how multi-material and multi-colour models are made. Featuring a revolutionary FlashSwap system of four independent toolheads, it completely eliminates purge waste and speeds up multi-colour printing by up to 500%. Combined with extreme 600 mm\/s travel speeds, fully automatic calibration, and a versatile 256 × 256 × 256 mm build volume, the Creator 5 delivers a seamless, highly efficient workflow for rapid prototyping and batch production.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e4 Independent Toolheads (FlashSwap):\u003c\/b\u003e Print with up to four colours or materials in a single pass with zero purge towers, drastically saving on filament costs and print time. Each toolhead has its own nozzle, extruder, and heater — swapping takes approximately 7 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtreme Speed \u0026amp; Precision:\u003c\/b\u003e Maximum travel speed of 600 mm\/s and acceleration up to 30,000 mm\/s², reducing production times without sacrificing quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFully Automated Calibration:\u003c\/b\u003e Smart sensors handle bed levelling, Z-offset, and dynamic flow control automatically to guarantee flawless first layers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdvanced Material Support:\u003c\/b\u003e Reaching nozzle temperatures of 320°C and bed temperatures of 120°C, it handles PLA, PETG, TPU, PLA-CF, PETG-CF, PET, SILK, PVA, and BVOH. Soluble PVA supports dissolve in water for complex geometries — a key advantage of tool-changing over single-nozzle systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSmart Monitoring:\u003c\/b\u003e Built-in Full HD 1080p camera, filament runout detection, and power loss recovery ensure your prints finish successfully\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMulti-Printer Management:\u003c\/b\u003e Fleet management capabilities over Wi-Fi, USB, and LAN make it effortless to scale up production on a 3D print farm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzle Options:\u003c\/b\u003e Compatible with 0.25 mm, 0.4 mm, 0.6 mm, and 0.8 mm hardened steel nozzles for different detail and speed requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePerfect For\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEducational labs and makerspaces\u003c\/li\u003e\n\u003cli\u003e3D print farms and small batch manufacturing\u003c\/li\u003e\n\u003cli\u003eDetailed multi-colour prototyping\u003c\/li\u003e\n\u003cli\u003eCosplay and scale model creation\u003c\/li\u003e\n\u003cli\u003eUsers looking to eliminate filament purge waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat's in the Box\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlashforge Creator 5 3D Printer\u003c\/li\u003e\n\u003cli\u003eTextured Flexible PEI Build Plate\u003c\/li\u003e\n\u003cli\u003ePower Cable \u0026amp; Accessories Kit\u003c\/li\u003e\n\u003cli\u003eQuick Start Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed engineering materials or a controlled printing environment? See the \u003cb\u003eFlashforge Creator 5 Pro\u003c\/b\u003e — the enclosed version with active 65°C chamber heating, HEPA 13 filtration, and full support for ABS, ASA, PC, and Nylon. Note: the Creator 5 cannot be upgraded to the Pro as they have structural differences.\u003c\/p\u003e\n\u003cp\u003eMaximise your creative output and eliminate filament waste with the Flashforge Creator 5 — multi-colour printing, redefined for efficiency.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":54099365560647,"sku":"FLF-CR5-3D-PRN","price":899.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-creator-5-high-speed-multi-colour-3d-printer-gray-981.webp?v=1780841299"},{"product_id":"flashforge-creator-5-pro-enclosed-industrial-3d-printer","title":"Flashforge Creator 5 Pro Enclosed Industrial 3D Printer","description":"\u003cp\u003e\u003cb\u003eProfessional Enclosed Multi-Colour 3D Printing for Industrial Applications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Flashforge Creator 5 Pro takes the groundbreaking zero-waste, four-toolhead FlashSwap technology of the Creator 5 and houses it in a fully enclosed, industrial-grade chassis. Designed for engineering and advanced manufacturing, the Pro model features active chamber heating up to 65°C and an advanced HEPA 13 dual-filtration system. This ensures flawless dimensional accuracy and zero warping when printing demanding, high-performance materials like ABS, ASA, PC, and Nylon (PA), while maintaining a safe and fume-free workspace.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eActive Chamber Heating:\u003c\/b\u003e Rapidly heats and maintains the enclosed chamber up to 65°C, preventing warping and layer splitting in advanced engineering materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e4 Independent Toolheads (FlashSwap):\u003c\/b\u003e Zero purge waste and up to 500% faster multi-colour and multi-material printing — each toolhead swaps in approximately 7 seconds with its own nozzle, extruder, and heater\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTop-Tier Air Filtration:\u003c\/b\u003e A medical-grade HEPA 13 filter combined with activated coconut carbon eliminates ultra-fine particles (UFPs) and VOCs for safe indoor use\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-Speed Performance:\u003c\/b\u003e Highly rigid CoreXY structure achieving 600 mm\/s travel speeds and 30,000 mm\/s² acceleration for rapid part delivery\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIntelligent Auto-Calibration:\u003c\/b\u003e Fully automated multi-toolhead offset calibration and auto-levelling for perfectly aligned, hands-free printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUnmatched Material Range:\u003c\/b\u003e Safely print high-strength filaments including ABS, ASA, PC, PA, PC-ABS, PPS-CF, PAHT-CF, PPA-CF, and carbon fibre (CF) composite variants\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSafety \u0026amp; Control:\u003c\/b\u003e Door-open detection automatically pauses the print; built-in HD camera provides remote monitoring via fleet management software\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzle Options:\u003c\/b\u003e Compatible with 0.25 mm, 0.4 mm, 0.6 mm, and 0.8 mm hardened steel nozzles for different detail and speed requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePerfect For\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineering design and functional prototyping\u003c\/li\u003e\n\u003cli\u003eIndustrial parts manufacturing and jigs\u003c\/li\u003e\n\u003cli\u003eAerospace and automotive applications\u003c\/li\u003e\n\u003cli\u003eProfessional 3D print farms\u003c\/li\u003e\n\u003cli\u003eEnvironments requiring strict safety and air quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat's in the Box\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlashforge Creator 5 Pro 3D Printer\u003c\/li\u003e\n\u003cli\u003eTextured Flexible PEI Build Plate\u003c\/li\u003e\n\u003cli\u003ePower Cable \u0026amp; Tool Kit\u003c\/li\u003e\n\u003cli\u003eHEPA \u0026amp; Carbon Filters (Pre-installed)\u003c\/li\u003e\n\u003cli\u003eQuick Start Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor open-frame multi-colour printing with PLA, PETG, and TPU at a lower entry price, see the \u003cb\u003eFlashforge Creator 5\u003c\/b\u003e. Note: the Creator 5 Pro cannot be downgraded to the standard Creator 5 — they have structural differences and are sold separately.\u003c\/p\u003e\n\u003cp\u003eTake industrial 3D printing to the next level with the Flashforge Creator 5 Pro — where professional enclosed reliability meets zero-waste multi-material innovation.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":54099512230215,"sku":"FLF-CR5-P-3D-PRN","price":1049.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-creator-5-pro-enclosed-industrial-3d-printer-silver-black-855.webp?v=1780841533"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/collections\/original-prusa-mk4s-fully-assembled-3d-printer-orange-396.webp?v=1781954092","url":"https:\/\/eolasprints.com\/en-sk\/collections\/professional-production-3d-printers.oembed?page=2","provider":"Eolas Prints","version":"1.0","type":"link"}