{"title":"Engineering \u0026 Composite Filament","description":"\u003cp\u003eEngineering and composite 3D printing filaments are for parts that have to perform mechanically — brackets, jigs, fixtures, housings, drone and RC components, and end-use functional parts under real load. This collection brings together the tougher, stiffer and reinforced materials that go beyond everyday printing.\u003c\/p\u003e\u003cp\u003eEngineering polymers like ABS and ASA offer impact resistance, heat tolerance and durability for working parts, while composite filaments — such as carbon-fibre and glass-fibre reinforced grades — add remarkable stiffness and dimensional stability at low weight. Reinforced composites are the materials of choice when a part must stay rigid under stress without adding bulk. A note for composite printing: abrasive carbon and glass fibres require a hardened steel nozzle, which we can supply alongside the filament.\u003c\/p\u003e\u003cp\u003eOur own engineering filaments are manufactured in Spain by Eolas Prints under ISO 9001 and ISO 14001 standards, and we stock specialist composite grades from Prusament for the most demanding applications. For functional parts that need to survive, start with the right material here — and ask us if you need help choosing.\u003c\/p\u003e\u003cp\u003eRelated collections: for everyday working parts see our \u003ca href=\"\/en-qa\/collections\/functional-parts-filament\"\u003efunctional parts filament\u003c\/a\u003e, and for heat-exposed components see \u003ca href=\"\/en-qa\/collections\/high-temperature-filament\"\u003ehigh-temperature filament\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"abs-filament","title":"ABS Filament","description":"\u003cp\u003eEolas Prints ABS filament is a significant advancement on standard ABS, offering lower shrinkage, reduced VOC emissions during printing, and improved mechanical properties — while retaining all the benefits that make ABS the material of choice for functional, heat-resistant parts.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (HDT)\u003c\/td\u003e\n\u003ctd\u003e83°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVICAT softening point\u003c\/td\u003e\n\u003ctd\u003e106°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.05 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage\u003c\/td\u003e\n\u003ctd\u003eLow — improved vs standard ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC emissions\u003c\/td\u003e\n\u003ctd\u003eReduced vs standard ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcetone vapour smoothing\u003c\/td\u003e\n\u003ctd\u003eCompatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-processing\u003c\/td\u003e\n\u003ctd\u003eGrinding, drilling, sawing, painting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e230–250°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e80–110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–60 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended — reduces warping and VOC exposure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003eOff or minimal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProtective enclosures and guards\u003c\/li\u003e\n\u003cli\u003eMechanical installation components\u003c\/li\u003e\n\u003cli\u003eIndustrial design prototypes\u003c\/li\u003e\n\u003cli\u003eCustom engineering components\u003c\/li\u003e\n\u003cli\u003eEnd-use mechanical parts\u003c\/li\u003e\n\u003cli\u003eTooling and precision instruments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003eManufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm in 22 colours including Black, White, Grey, Red, and Cyan.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 900 G \/ White","offer_id":43499234263299,"sku":"ABS-PRM-1.75M-WHT-900G","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 900 G \/ Black","offer_id":43499234066691,"sku":"ABS-PRM-1.75M-BLK-900G","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 900 G \/ Grey","offer_id":43499234394371,"sku":"ABS-PRM-1.75M-GRY-900G","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 900 G \/ Red","offer_id":43499234164995,"sku":"ABS-PRM-1.75M-RED-900G","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 900 G \/ Cyan","offer_id":43499234590979,"sku":"ABS-PRM-1.75M-CYN-900G","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 2.2 Kg \/ White","offer_id":43499234328835,"sku":"ABS-PRM-1.75M-WHT-2.2KG","price":49.0,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 2.2 Kg \/ Black","offer_id":43499234099459,"sku":"ABS-PRM-1.75M-BLK-2.2KG","price":49.0,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 2.2 Kg \/ Grey","offer_id":43499234427139,"sku":"ABS-PRM-1.75M-GRY-2.2KG","price":49.0,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 4.5 Kg \/ White","offer_id":43499234296067,"sku":"ABS-PRM-1.75M-WHT-4.5KG","price":105.0,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 4.5 Kg \/ Black","offer_id":43499235213571,"sku":"ABS-PRM-1.75M-BLK-4.5KG","price":105.0,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 4.5 Kg \/ Grey","offer_id":43499235279107,"sku":"ABS-PRM-1.75M-GRY-4.5KG","price":105.0,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 900 G \/ White","offer_id":43499234951427,"sku":"ABS-PRM-2.85M-WHT-900G","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 900 G \/ Black","offer_id":43499234656515,"sku":"ABS-PRM-2.85M-BLK-900G","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 900 G \/ Grey","offer_id":43499235016963,"sku":"ABS-PRM-2.85M-GRY-900G","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 900 G \/ Red","offer_id":43499234787587,"sku":"ABS-PRM-2.85M-RED-900G","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 900 G \/ Cyan","offer_id":43499235148035,"sku":"ABS-PRM-2.85M-CYN-900G","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.2 Kg \/ White","offer_id":43499234984195,"sku":"ABS-PRM-2.85M-WHT-2.2KG","price":49.0,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.2 Kg \/ Black","offer_id":43499234722051,"sku":"ABS-PRM-2.85M-BLK-2.2KG","price":49.0,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.2 Kg \/ Grey","offer_id":43499235049731,"sku":"ABS-PRM-2.85M-GRY-2.2KG","price":49.0,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 4.5 Kg \/ White","offer_id":43499235475715,"sku":"ABS-PRM-2.85M-WHT-4.5KG","price":105.0,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 4.5 Kg \/ Black","offer_id":43499235442947,"sku":"ABS-PRM-2.85M-BLK-4.5KG","price":105.0,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 4.5 Kg \/ Grey","offer_id":43499235508483,"sku":"ABS-PRM-2.85M-GRY-4.5KG","price":105.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/abs-filament-spool-3d-printer-1-75-mm-900-g-black-798.webp?v=1724968386"},{"product_id":"asa-filament","title":"ASA Filament","description":"\u003cp\u003eEolas Prints ASA filament is engineered for outdoor and high-UV environments. An evolution of ABS, ASA offers the same strength and heat resistance while adding certified UV stability and superior weathering performance — making it the go-to material for parts that live outside.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (HDT)\u003c\/td\u003e\n\u003ctd\u003e85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVICAT softening point\u003c\/td\u003e\n\u003ctd\u003e105°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.07 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV resistance\u003c\/td\u003e\n\u003ctd\u003eCertified — colour and structure stable after extended outdoor exposure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage\u003c\/td\u003e\n\u003ctd\u003eReduced vs standard ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterlayer adhesion\u003c\/td\u003e\n\u003ctd\u003eEnhanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e240–260°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e90–110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–60 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003eOff or minimal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDialling In Your Settings\u003c\/h2\u003e\n\u003cp\u003eASA's main challenge is warping — a stable, enclosed chamber and good adhesion solve most of it. These guides help: our \u003ca href=\"\/en-us\/blogs\/advanced-3d-printing\/best-print-settings-petg-tpu-asa\" title=\"Best print settings for petg, tpu \u0026amp; asa | eolas prints\" aria-label=\"Best print settings for petg, tpu \u0026amp; asa | eolas prints\"\u003ePETG, TPU \u0026amp; ASA settings guide\u003c\/a\u003e, our dedicated \u003ca href=\"\/en-us\/blogs\/advanced-3d-printing\/fix-warping-abs-asa-guide\" title=\"How to stop warping in abs \u0026amp; asa: complete guide | eolas prints\" aria-label=\"How to stop warping in abs \u0026amp; asa: complete guide | eolas prints\"\u003eguide to stopping warping in ABS \u0026amp; ASA\u003c\/a\u003e, and \u003ca href=\"\/en-us\/blogs\/advanced-3d-printing\/fix-bed-adhesion-first-layer-problems\" title=\"First layer not sticking? Fix bed adhesion problems | eolas prints\" aria-label=\"First layer not sticking? Fix bed adhesion problems | eolas prints\"\u003efirst-layer \u0026amp; bed-adhesion troubleshooting\u003c\/a\u003e. An adhesive like \u003ca href=\"\/en-us\/products\/magigoo-original-3d-printing-adhesive\" title=\"Magigoo 3d printing adhesive for layer adhesion – eolas prints\" aria-label=\"Magigoo 3d printing adhesive for layer adhesion – eolas prints\"\u003eMagigoo Original\u003c\/a\u003e helps ASA hold to the bed. For everything in one place, see our \u003ca href=\"\/en-us\/blogs\/advanced-3d-printing\/3d-printing-troubleshooting-calibration-hub\" title=\"3d printing troubleshooting \u0026amp; calibration guide index | eolas prints\" aria-label=\"3d printing troubleshooting \u0026amp; calibration guide index | eolas prints\"\u003ecomplete troubleshooting \u0026amp; calibration guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive exterior components and prototypes\u003c\/li\u003e\n\u003cli\u003eMarine equipment and watercraft accessories\u003c\/li\u003e\n\u003cli\u003eElectrical housings and outdoor enclosures\u003c\/li\u003e\n\u003cli\u003eSporting equipment and outdoor gear\u003c\/li\u003e\n\u003cli\u003eGarden and architectural fixtures\u003c\/li\u003e\n\u003cli\u003eCustom engineering components for outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003eManufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm in 22 colours including Black, White, Grey, Orange, and Cyan.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 900 G \/ Orange","offer_id":49109313421639,"sku":"ASA-PRM-1.75M-ORG-900G","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 900 G \/ White","offer_id":49109313323335,"sku":"ASA-PRM-1.75M-WHT-900G","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 900 G \/ Black","offer_id":49109313356103,"sku":"ASA-PRM-1.75M-BLK-900G","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 900 G \/ Grey","offer_id":49109313388871,"sku":"ASA-PRM-1.75M-GRY-900G","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 900 G \/ Cyan","offer_id":49109313454407,"sku":"ASA-PRM-1.75M-CYN-900G","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 2.2 Kg \/ White","offer_id":49109313487175,"sku":"ASA-PRM-1.75M-WHT-2.2KG","price":57.44,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 2.2 Kg \/ Black","offer_id":49109313519943,"sku":"ASA-PRM-1.75M-BLK-2.2KG","price":57.44,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 2.2 Kg \/ Grey","offer_id":49109313552711,"sku":"ASA-PRM-1.75M-GRY-2.2KG","price":57.44,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 4.5 Kg \/ White","offer_id":49109313651015,"sku":"ASA-PRM-1.75M-WHT-4.5KG","price":120.0,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 4.5 Kg \/ Black","offer_id":49109313683783,"sku":"ASA-PRM-1.75M-BLK-4.5KG","price":120.0,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 4.5 Kg \/ Grey","offer_id":49109313716551,"sku":"ASA-PRM-1.75M-GRY-4.5KG","price":120.0,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 900 G \/ Orange","offer_id":49109313913159,"sku":"ASA-PRM-2.85M-ORG-900G","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 900 G \/ White","offer_id":49109313814855,"sku":"ASA-PRM-2.85M-WHT-900G","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 900 G \/ Black","offer_id":49109313847623,"sku":"ASA-PRM-2.85M-BLK-900G","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 900 G \/ Grey","offer_id":49109313880391,"sku":"ASA-PRM-2.85M-GRY-900G","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 900 G \/ Cyan","offer_id":49109313945927,"sku":"ASA-PRM-2.85M-CYN-900G","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.2 Kg \/ White","offer_id":49109313978695,"sku":"ASA-PRM-2.85M-WHT-2.2KG","price":57.44,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 2.2 Kg \/ Black","offer_id":49109314011463,"sku":"ASA-PRM-2.85M-BLK-2.2KG","price":57.44,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 2.2 Kg \/ Grey","offer_id":49109314044231,"sku":"ASA-PRM-2.85M-GRY-2.2KG","price":57.44,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 4.5 Kg \/ White","offer_id":49109314142535,"sku":"ASA-PRM-2.85M-WHT-4.5KG","price":120.0,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 4.5 Kg \/ Black","offer_id":49109314175303,"sku":"ASA-PRM-2.85M-BLK-4.5KG","price":120.0,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 4.5 Kg \/ Grey","offer_id":49109314208071,"sku":"ASA-PRM-2.85M-GRY-4.5KG","price":120.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/asa-filament-spool-bright-orange-1-75-mm-900-g-951.webp?v=1725009900"},{"product_id":"prusa-core-one","title":"Prusa Core One Plus +","description":"\u003cp\u003eThe Prusa CORE One+ is Prusa Research's fully enclosed CoreXY 3D printer, designed to bridge the gap between hobbyist bed-slingers and professional enclosed systems. With a 250×220×270 mm build volume, active chamber heating to 55°C, and the Nextruder direct drive extruder, the CORE One+ handles engineering materials — ASA, PC, Nylon, PA-CF — that the MK4S can print but that benefit significantly from a warm, stable chamber environment. Available fully assembled or as a kit.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY kinematics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e250 × 220 × 270 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax chamber temperature\u003c\/td\u003e\n\u003ctd\u003e55°C (active heating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e290°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder\u003c\/td\u003e\n\u003ctd\u003eNextruder — direct drive, load cell auto-levelling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eAll-steel exoskeleton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eFully enclosed — active temperature regulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Shaper\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eEthernet, Wi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote monitoring\u003c\/td\u003e\n\u003ctd\u003ePrusa Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eOpen-source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable as\u003c\/td\u003e\n\u003ctd\u003eFully assembled or kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy CoreXY and Why It Matters Here\u003c\/h2\u003e\n\u003cp\u003eIn a traditional Cartesian printer (MK4S, MINI+), the print bed moves back and forth on the Y axis, carrying the weight of the print as it grows. This limits practical print speeds and causes quality degradation on tall prints as mass increases. In the CORE One+'s CoreXY design, the toolhead moves in both X and Y while the bed moves only vertically — dramatically reducing moving mass. Combined with an all-steel frame and active chamber heating, this allows the CORE One+ to print faster than the MK4S, with better quality at speed, and with consistent results on prints that would be problematic in open-air machines.\u003c\/p\u003e\n\n\u003ch2\u003e55°C Active Chamber Heating\u003c\/h2\u003e\n\u003cp\u003eMany printers are technically enclosed but passively heated — the chamber warms up from the bed's residual heat. The CORE One+ actively heats the chamber to a set temperature, maintaining it throughout the print. At 55°C, materials like ASA and PC Blend print with dramatically reduced warping and delamination risk. The system also intelligently manages PLA and PETG printing with the door closed — detecting when chamber temperature is rising too high and adjusting accordingly, so you don't need to open the door to print standard materials.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG — printable with door closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e ASA, ABS, PC Blend, PA-11, PA-12, PA-GF, PA-CF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-performance:\u003c\/strong\u003e PEEK, PEI (with HT Hotend upgrade)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU (direct drive handles flexible filaments reliably)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite:\u003c\/strong\u003e Carbon-fibre-filled and glass-fibre-filled materials (hardened nozzle required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEngineers and product designers who regularly print in ASA, PC, or Nylon and need reliable warping-free results\u003c\/li\u003e\n\u003cli\u003eProfessional prototyping studios requiring faster print speeds and better quality-at-speed than a bed-slinger offers\u003c\/li\u003e\n\u003cli\u003eMakers stepping up from the MK4S who need enclosure capability without moving to industrial pricing\u003c\/li\u003e\n\u003cli\u003eSmall batch manufacturers producing functional parts in technical materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official Prusa Research reseller based in Cantabria, Spain. Available assembled (€1,399) or as a kit (€1,099). EU warranty and support included.\u003c\/p\u003e","brand":"Prusa Research","offers":[{"title":"Assembled","offer_id":52470317285703,"sku":"PRU-CR-ONE-3D-PRN","price":1399.0,"currency_code":"EUR","in_stock":true},{"title":"Kit","offer_id":52470317318471,"sku":"PRU-CR-ONE-KIT-3D-PRN","price":1099.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/prusa-core-one-plus-3d-printer-orange-603.webp?v=1764878420"},{"product_id":"prusa-pro-ht90","title":"Prusa Pro HT90","description":"\u003cp\u003eThe Prusa Pro HT90 is a professional delta FDM 3D printer built around one capability that most desktop machines cannot offer: a fully enclosed chamber that heats to 90°C. That single feature unlocks a class of engineering materials — PEEK, PEKK, PPS, PSU, PEI (Ultem) — that previously required industrial machines costing five to ten times more. The HT90 brings them into reach for engineering teams, R\u0026amp;D labs, medical device companies, and serious professionals.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003eØ300 × 400 mm (cylindrical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKinematics\u003c\/td\u003e\n\u003ctd\u003eDelta\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChamber temperature\u003c\/td\u003e\n\u003ctd\u003eUp to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003eUp to 500°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint heads included\u003c\/td\u003e\n\u003ctd\u003e2 — High-Flow and High-Temperature (swappable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003eHEPA air recirculation built in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eOnline and offline operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResonance compensation\u003c\/td\u003e\n\u003ctd\u003eInput Shaper technology\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder type\u003c\/td\u003e\n\u003ctd\u003eDirect drive with load cell sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003e90°C Chamber — Why It Matters\u003c\/h2\u003e\n\u003cp\u003eWarping, layer delamination, and internal stress in engineering materials are almost always caused by thermal gradients — the part cools unevenly as it's being printed. A heated chamber eliminates this by maintaining uniform ambient temperature around the part throughout the print. At 90°C, the HT90 creates the right thermal environment for high-performance polymers that require it, while also significantly improving results with mid-range materials like ABS, ASA, PA, and PCCF that benefit from reduced thermal stress even if they don't strictly require a heated chamber.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial class\u003c\/th\u003e\n\u003cth\u003eExamples\u003c\/th\u003e\n\u003cth\u003eChamber required\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, PLA HS\u003c\/td\u003e\n\u003ctd\u003eNo — chamber can be open or closed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngineering\u003c\/td\u003e\n\u003ctd\u003eABS, ASA, PA, PA-CF, PCCF\u003c\/td\u003e\n\u003ctd\u003eRecommended — reduces warping and delamination\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-performance\u003c\/td\u003e\n\u003ctd\u003ePEEK, PEKK, PPS, PSU, PES, PEI (Ultem)\u003c\/td\u003e\n\u003ctd\u003eRequired — chamber at 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 500°C capable nozzle handles the most demanding engineering polymers with no hardware modifications required. Both print heads are included in the box — no additional purchases needed to access high-temperature capability.\u003c\/p\u003e\n\n\u003ch2\u003eDual Swappable Print Heads\u003c\/h2\u003e\n\u003cp\u003eThe HT90 ships with two specialised heads that swap without tools:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Flow Head\u003c\/strong\u003e — optimised for standard and mid-range materials at high speeds. Input Shaper resonance compensation enables rapid prototyping without sacrificing surface quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Temperature Head\u003c\/strong\u003e — engineered for materials requiring nozzle temperatures up to 500°C. Compatible with all high-performance engineering polymers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSwitching heads takes minutes and requires no recalibration — the load cell sensor handles automatic first layer calibration on every print.\u003c\/p\u003e\n\n\u003ch2\u003eHEPA Filtration\u003c\/h2\u003e\n\u003cp\u003ePrinting PEEK, Ultem, and similar high-performance polymers generates VOCs and ultrafine particles. The HT90's built-in air recirculation system with HEPA filtration continuously purifies the chamber air during printing, reducing exposure to harmful emissions. This is not an optional add-on — it is integrated into the machine and active whenever the chamber is in use.\u003c\/p\u003e\n\n\u003ch2\u003eDelta Kinematics\u003c\/h2\u003e\n\u003cp\u003eThe delta configuration — three arms moving a central print head — enables faster movement speeds and a large cylindrical build volume that suits tall, round, and rotationally symmetric parts particularly well. The Ø300mm diameter and 400mm height accommodate industrial-scale prototypes in a single print. Delta printers also have fewer moving parts in the XY plane than Cartesian machines, which contributes to the mechanical precision the HT90 maintains across its full build volume.\u003c\/p\u003e\n\n\u003ch2\u003eWho the HT90 Is For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering and R\u0026amp;D teams\u003c\/strong\u003e printing functional prototypes in PEEK, PA-CF, or PPS that need to survive real operating conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedical device companies\u003c\/strong\u003e requiring biocompatible, autoclave-sterilisable materials such as PEEK and PEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomotive and aerospace\u003c\/strong\u003e prototyping where parts must meet thermal and mechanical requirements, not just look right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial tooling\u003c\/strong\u003e — jigs, fixtures, and end-of-arm tooling in high-temperature resistant polymers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversity and research labs\u003c\/strong\u003e needing professional-grade material capability without industrial machine budgets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an authorised Prusa reseller based in Cantabria, Spain, serving customers across Europe. We stock the Prusa Pro HT90 with full manufacturer warranty and EU-compliant support.\u003c\/p\u003e","brand":"Prusa Research","offers":[{"title":"Default Title","offer_id":51472689594695,"sku":"PRU-HT-90-3D-PRN","price":12599.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/prusa-pro-ht90-delta-style-3d-printer-461.webp?v=1763066133"},{"product_id":"prusa-core-one-ultimate-edition","title":"Prusa Core One Plus + Ultimate Edition","description":"\u003cp\u003eThe Prusa CORE One+ Ultimate Edition is the fully equipped configuration of Prusa's enclosed CoreXY 3D printer, combining the CORE One+ hardware with a curated set of accessories that extend its material capability and day-to-day usability. It includes the Advanced Filtration System — an active carbon and HEPA filtration unit that captures VOCs and particulates from the enclosed chamber — making it the appropriate choice for office and laboratory environments where air quality matters when printing engineering materials.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY kinematics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e250 × 220 × 270 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax chamber temperature\u003c\/td\u003e\n\u003ctd\u003e55°C (active heating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e290°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder\u003c\/td\u003e\n\u003ctd\u003eNextruder — direct drive, load cell auto-levelling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eAll-steel exoskeleton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003eAdvanced Filtration System (carbon + HEPA) — included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Shaper\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eEthernet, Wi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote monitoring\u003c\/td\u003e\n\u003ctd\u003ePrusa Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable as\u003c\/td\u003e\n\u003ctd\u003eFully assembled or kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eUltimate Edition vs Standard CORE One+\u003c\/h2\u003e\n\u003cp\u003eThe CORE One+ Ultimate Edition includes everything in the standard CORE One+ plus the Advanced Filtration System and additional accessories. The filtration system is the key differentiator for office and shared workspace use — when printing ASA, ABS, or Nylon in an enclosed chamber, the machine produces VOCs and fine particles that are concentrated inside the enclosure and released when it opens. The active filtration system captures these before they enter the room, making high-temperature material printing practical in environments where open windows or fume hoods are not available.\u003c\/p\u003e\n\n\u003ch2\u003eAdvanced Filtration System\u003c\/h2\u003e\n\u003cp\u003eThe included filtration system uses a combination of activated carbon (for VOC and odour capture) and HEPA filtration (for particulate matter). It mounts directly to the CORE One+ enclosure and activates automatically during printing. For offices, design studios, dental labs, and educational environments where PC, ASA, ABS, and Nylon are regularly printed, this is the most complete out-of-box configuration available for the CORE One+ platform.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG — with door closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e ASA, ABS, PC Blend, PA-11, PA-12, PA-GF, PA-CF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-performance:\u003c\/strong\u003e PEEK, PEI (with optional HT Hotend upgrade)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite:\u003c\/strong\u003e Carbon-fibre and glass-fibre filled materials (hardened nozzle required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOffice and laboratory environments printing engineering materials where VOC and particle control is required\u003c\/li\u003e\n\u003cli\u003eDesign studios and engineering teams wanting the complete CORE One+ setup with no additional purchases needed\u003c\/li\u003e\n\u003cli\u003eEducational institutions needing safe, filtered enclosed printing for student use\u003c\/li\u003e\n\u003cli\u003eProfessionals who print ASA, ABS, or Nylon regularly and want to do so without fume management concerns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official Prusa Research reseller based in Cantabria, Spain. Available assembled (€1,799) or as a kit (€1,499). EU warranty and support included.\u003c\/p\u003e","brand":"Prusa Research","offers":[{"title":"Assembled","offer_id":52470902980935,"sku":"PRU-CR-ONE-ULT-3D-PRN","price":1799.0,"currency_code":"EUR","in_stock":true},{"title":"Kit","offer_id":52470903013703,"sku":"PRU-CR-ONE-KIT-ULT-3D-PRN","price":1499.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/prusa-core-one-ultimate-edition-3d-printer-accessories-294.webp?v=1759586566"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/collections\/asa-filament-spool-bright-orange-1-75-mm-900-g-951.webp?v=1781954126","url":"https:\/\/eolasprints.com\/en-qa\/collections\/engineering-composite-filament.oembed","provider":"Eolas Prints","version":"1.0","type":"link"}