{"title":"Laser Accessories","description":"\u003cp\u003eAccessories for xTool and Bambu Lab lasers: honeycomb panels, riser bases, conveyor feeders, rotary attachments, laser modules, air assist and fume extraction. Official reseller, shipped from Cantabria, Spain.\u003c\/p\u003e","products":[{"product_id":"xtool-safetypro-ap2","title":"xTool SafetyPro AP2 \/ AP2 Max Air Purifier for Laser Machines","description":"\u003cp\u003eThe xTool SafetyPro AP2 is a fume purifier for laser cutters, engravers and DTF printers that filters smoke in the room instead of venting it outside. Choose the AP2 (150 m³\/h, 6-layer filtration, 55 dB) for desktop machines, or the AP2 Max (700 m³\/h, 7-layer filtration with a formaldehyde filter) for high-power CO2 lasers such as the P3. Both use SuperCyclone separation to catch large particles before the filters and remove 99.97% of particles.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow\u003c\/td\u003e\n\u003ctd\u003eAP2: 150 m³\/h · AP2 Max: 700 m³\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003eAP2: 6 layers (SuperCyclone, pre-filter, medium-efficiency, activated carbon, ultra-dense carbon mesh, HEPA) · AP2 Max: 7 layers, adding a KM formaldehyde filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCyclones\u003c\/td\u003e\n\u003ctd\u003eAP2: 36 · AP2 Max: 72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow control\u003c\/td\u003e\n\u003ctd\u003eAP2: 4 levels · AP2 Max: 0–100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003eAP2: 55 dB · AP2 Max: 65 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eAP2: 290 × 491 × 542 mm · AP2 Max: 662 × 452 × 845 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart control\u003c\/td\u003e\n\u003ctd\u003eBluetooth auto on\/off with xTool machines, material-based settings, filter-life monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eHow SuperCyclone Filtration Works\u003c\/h2\u003e\u003cp\u003eSmoke first passes through cyclone separators that spin out dust and large particles, extending pre-filter life by up to ten times. Air then runs through medium-efficiency, activated-carbon and ultra-dense carbon-mesh stages for odours and VOCs, and a HEPA stage for fine particles. The AP2 Max adds a professional formaldehyde filter that removes at least 80% of formaldehyde in a single pass at 50% airflow, and its larger filter set lasts around four times longer between changes.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAP2 – manual and automatic modes:\u003c\/strong\u003e \u003ca href=\"\/en-no\/products\/xtool-m2-color-craft-laser-cutter-engraver\"\u003eM2\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003eF2\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver\"\u003eF1 Ultra\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-f2-ultra-60w-mopa-40w-diode-dual-laser-engraver\"\u003eF2 Ultra\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-f2-ultra-uv-5w-uv-laser-engraver\"\u003eF2 Ultra UV\u003c\/a\u003e, M1 Ultra, \u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003eP2S\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-s1-enclosed-diode-laser-cutter\"\u003eS1\u003c\/a\u003e and the xTool OS1 Automatic Shaker Oven (Apparel Printer). Manual mode only: F1, F1 Lite, M1, P2 and D Series. xTool also lists the \u003ca href=\"\/en-no\/products\/xtool-o1-omni-uv-printer\"\u003eO1 Omni Printer\u003c\/a\u003e as compatible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAP2 Max – manual and automatic modes:\u003c\/strong\u003e MetalFab, \u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003eP3\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003eP2S\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003eF2\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver\"\u003eF1 Ultra\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-f2-ultra-60w-mopa-40w-diode-dual-laser-engraver\"\u003eF2 Ultra\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-f2-ultra-uv-5w-uv-laser-engraver\"\u003eF2 Ultra UV\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-s1-enclosed-diode-laser-cutter\"\u003eS1\u003c\/a\u003e and M1 Ultra. Manual mode only: \u003ca href=\"\/en-no\/products\/xtool-m2-color-craft-laser-cutter-engraver\"\u003eM2\u003c\/a\u003e, F1, F1 Lite, M1, P2 and D Series.\u003c\/p\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAP2: desktop diode, CO2 and galvo laser users (S1, P2S, M2, F-Series) and Apparel Printer owners\u003c\/li\u003e\n\u003cli\u003eAP2 Max: P3 and other high-power CO2 laser users, laser welding, and workshops with the strictest air-quality demands\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. Running a flagship CO2 laser? The AP2 Max is the matching purifier for the \u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3 80W CO2 laser cutter\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"AP2","offer_id":55457862877511,"sku":"XTL-AP2-ACC","price":1008.0,"currency_code":"EUR","in_stock":true},{"title":"AP2 Max","offer_id":55457864515911,"sku":"XTL-AP2MAX-ACC","price":2520.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-safetypro-ap2-ap2.jpg?v=1792254268"},{"product_id":"xtool-ra3-rotary","title":"xTool RA3 \/ RA3 Lite Rotary for P3, P2S, F-Series \u0026 M2","description":"\u003cp\u003eThe xTool RA3 is a magnetic, tool-free rotary attachment for engraving tumblers, mugs, glasses, vases, spheres and rings on xTool lasers. Its MagSwap™ design switches between roller, chuck, sphere, ring and inner-ring modes in seconds, the T-type jaws grip objects up to 130 mm across, and on P-Series machines it measures the object automatically for a 3D preview. RA3 Lite is the version made for the xTool M2.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eModes\u003c\/td\u003e\n\u003ctd\u003eRoller, chuck, sphere, ring and inner-ring rotary; full-wrap engraving on vases\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChuck object diameter\u003c\/td\u003e\n\u003ctd\u003eRA3: 0–130 mm · RA3 Lite: 0–100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAttachment system\u003c\/td\u003e\n\u003ctd\u003eMagSwap™ magnetic mounting, no tools required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. engraving speed\u003c\/td\u003e\n\u003ctd\u003e1200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart features (P-Series)\u003c\/td\u003e\n\u003ctd\u003e360° LiDAR Mapping on the P3: automatic diameter measurement, mode recognition, 3D modelling preview and auto-focus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBatch production\u003c\/td\u003e\n\u003ctd\u003eRoller batch (up to 3 roller sets) and chuck batch with the optional Roller Extension Kit and Chuck Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhich Version Do I Need?\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRA3 for P3 \/ F-Series\u003c\/strong\u003e fits the xTool P3 and the F2, F1 Ultra, F2 Ultra and F2 Ultra UV. \u003cstrong\u003eRA3 for P2S\u003c\/strong\u003e is the P2S\/P2 version; it needs the P2S riser base (sold separately) to make room under the laser head. \u003cstrong\u003eRA3 Lite for M2\u003c\/strong\u003e is made exclusively for the M2: it supports chuck, sphere, ring and full-wrap vase engraving up to 100 mm, but inner-ring engraving may be limited by the M2's horizontal laser output and the Roller Extension Kit is not supported. RA3 Lite and RA3 are otherwise the same size and weight.\u003c\/p\u003e\u003ch2\u003eSmart Rotary on P-Series vs F-Series\u003c\/h2\u003e\u003cp\u003eOn the P3, P2S and P2, RA3 can measure the object diameter, build a 3D model and show a visual preview before you engrave. The F-Series are galvo lasers that use a vision camera instead of distance sensors, so these automated features are not available there; you still get MagSwap™ tool-free set-up and the larger 130 mm jaw capacity, up from 100 mm on the RA2 Pro. The M1 Ultra, S1 and F1 remain on the RA2 Pro.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3\u003c\/a\u003e – RA3 for P3 \/ F-Series\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S\u003c\/a\u003e (and P2) – RA3 for P2S, riser base required\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003exTool F2\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver\"\u003eF1 Ultra\u003c\/a\u003e, \u003ca href=\"\/en-no\/products\/xtool-f2-ultra-60w-mopa-40w-diode-dual-laser-engraver\"\u003eF2 Ultra\u003c\/a\u003e and \u003ca href=\"\/en-no\/products\/xtool-f2-ultra-uv-5w-uv-laser-engraver\"\u003eF2 Ultra UV\u003c\/a\u003e – RA3 for P3 \/ F-Series\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-no\/products\/xtool-m2-color-craft-laser-cutter-engraver\"\u003exTool M2\u003c\/a\u003e – RA3 Lite for M2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGift and personalisation businesses engraving tumblers, mugs and glassware\u003c\/li\u003e\n\u003cli\u003eJewellery makers engraving inside and outside of rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. For the full smart-rotary experience with LiDAR mapping, pair RA3 with the \u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3 80W CO2 laser cutter\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"RA3 for P3 \/ F-Series","offer_id":55457877000519,"sku":"XTL-RA3-P3F-ACC","price":393.0,"currency_code":"EUR","in_stock":true},{"title":"RA3 for P2S (riser base required)","offer_id":55457879982407,"sku":"XTL-RA3-P2S-ACC","price":393.0,"currency_code":"EUR","in_stock":true},{"title":"RA3 Lite for M2","offer_id":55457880015175,"sku":"XTL-RA3LITE-M2-ACC","price":262.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-ra3-rotary-p3-f-series.webp?v=1792254268"},{"product_id":"xtool-honeycomb-panel-2-0-for-p2s","title":"xTool Honeycomb Panel 2.0 for P2S \/ P2","description":"\u003cp\u003eThe \u003cstrong\u003exTool Honeycomb Panel 2.0\u003c\/strong\u003e is the official honeycomb work bed for the xTool P2S and P2 CO2 laser cutters. Its finer honeycomb cells support material from below so small cut pieces do not drop through and scorch, while the open structure lets smoke and heat escape for cleaner edges and a cleaner back face. At \u003cstrong\u003e630 × 327 × 15 mm\u003c\/strong\u003e it fills the P2 work area and carries up to \u003cstrong\u003e5 kg\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003exTool P2S and xTool P2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel size\u003c\/td\u003e\n\u003ctd\u003e630 × 327 × 15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel weight\u003c\/td\u003e\n\u003ctd\u003e2.1 kg (3.1 kg packed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. load\u003c\/td\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003e5 mm thickened steel bar, integrated handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003e4 magnetic material pins, cleaning brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhat Version 2.0 Changes\u003c\/h2\u003e\n\u003cp\u003eCompared with the first honeycomb panel, version 2.0 has a smaller aperture and a thinner, sleeker profile. The encircled honeycomb shape holds small fragments in place, so intricate cut-outs such as lettering or snowflake shapes come out with smooth edges instead of falling into the machine. The 5 mm thickened steel bar and 15 mm overall thickness make the bed less prone to deformation.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use It Instead of the Slats\u003c\/h2\u003e\n\u003cp\u003eThe P2S's blade slats are ideal for large sheets. Swap in the honeycomb panel when you batch-cut small parts, engrave thin or flexible material that needs flat support, or want fewer slat marks on the underside. The handle lets you lift it in and out in seconds, and the magnetic pins hold warped sheets flat.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned for the \u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S 55W CO2 laser cutter\u003c\/a\u003e and the earlier xTool P2. It is not compatible with the xTool P3, which has its own honeycomb panel.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eP2S owners cutting small, detailed parts in batches\u003c\/li\u003e\n\u003cli\u003eMakers working with thin wood, card, felt or fabric that needs flat support\u003c\/li\u003e\n\u003cli\u003eWorkshops that want cleaner undersides with less post-processing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003exTool P2 Honeycomb Panel 2.0\u003c\/li\u003e\n\u003cli\u003e4 × magnetic material pins\u003c\/li\u003e\n\u003cli\u003eCleaning brush\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. Pair it with the \u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S 55W CO2 laser cutter\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478220259655,"sku":"XTL-P2-HC2-ACC","price":143.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-honeycomb-panel-2-0-for-p2s-main.jpg?v=1792407133"},{"product_id":"xtool-riser-base-for-p2s","title":"xTool Riser Base for P2S \/ P2","description":"\u003cp\u003eThe \u003cstrong\u003exTool Riser Base\u003c\/strong\u003e lifts the xTool P2S or P2 so you can engrave much taller objects and feed long material straight through the machine. It raises the maximum workpiece height to \u003cstrong\u003e215 mm\u003c\/strong\u003e, opens a \u003cstrong\u003e640 mm wide passthrough\u003c\/strong\u003e for the Automatic Conveyor Feeder, and gives rotary attachments room for objects up to 180 mm in diameter. Available in white or black to match your machine.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003exTool P2S and xTool P2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. workpiece height\u003c\/td\u003e\n\u003ctd\u003e215 mm without tray, 208 mm with tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. passthrough\u003c\/td\u003e\n\u003ctd\u003e640 mm wide × 115 mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotary diameter\u003c\/td\u003e\n\u003ctd\u003eRoller 3–180 mm, chuck 0–100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct size\u003c\/td\u003e\n\u003ctd\u003e1000 × 590 × 175 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e11 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage size\u003c\/td\u003e\n\u003ctd\u003e820 × 345 × 270 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eWhite or black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhy You Need It\u003c\/h2\u003e\n\u003cp\u003eOn its own the P2S takes workpieces of limited height. The riser base adds height under the machine while keeping the work zone fully enclosed, so no laser light or smoke escapes when you engrave tall boxes, cases or thick boards (enclosure is not maintained while the passthrough is open). A storage compartment on the right holds removed slats, screws or a rotary between jobs.\u003c\/p\u003e\n\u003ch2\u003eRequired for Conveyor and Rotary\u003c\/h2\u003e\n\u003cp\u003eThe riser base is the foundation for the P2S production accessories: the xTool Automatic Conveyor Feeder and its extension rails must be mounted on it, and the RA3 rotary for P2S needs the extra clearance it provides for tumblers, bottles and other cylindrical items.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eFits the \u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S 55W CO2 laser cutter\u003c\/a\u003e and the earlier xTool P2. Not compatible with the xTool P3.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMakers engraving tall boxes, cases or thick blocks\u003c\/li\u003e\n\u003cli\u003eP2S owners adding the Automatic Conveyor Feeder for long material\u003c\/li\u003e\n\u003cli\u003eBusinesses engraving drinkware with a rotary attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. Built for the \u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S 55W CO2 laser cutter\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"White","offer_id":55478220718407,"sku":"XTL-P2-RISER-W-ACC","price":514.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":55478220751175,"sku":"XTL-P2-RISER-B-ACC","price":514.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-riser-base-for-p2s-white.webp?v=1792407165"},{"product_id":"xtool-s1-honeycomb-panel","title":"xTool Honeycomb Panel for S1","description":"\u003cp\u003eThe \u003cstrong\u003exTool Honeycomb Panel for S1\u003c\/strong\u003e is xTool's official cutting bed for the xTool S1 enclosed diode laser. It lifts the workpiece off the machine's base plate on a steel honeycomb grid, so smoke and heat escape underneath instead of bouncing back into the material. The result is smoother edges and fewer scorch marks and oily smoke stains on the back of cut-through parts. Nine 5 mm steel bars and a 22 mm deep panel give it a \u003cstrong\u003e5 kg load capacity\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003exTool S1 (20W and 40W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eSteel honeycomb, 9 × 5 mm steel bars, 22 mm panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad capacity\u003c\/td\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeet\u003c\/td\u003e\n\u003ctd\u003e5 mm anti-slip pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScales\u003c\/td\u003e\n\u003ctd\u003eInch and cm on both axes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct size\u003c\/td\u003e\n\u003ctd\u003e565 × 375 × 27 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct weight\u003c\/td\u003e\n\u003ctd\u003e2.345 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage\u003c\/td\u003e\n\u003ctd\u003e653 × 448 × 72 mm, 3.0 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhy Cut on a Honeycomb\u003c\/h2\u003e\n\u003cp\u003eWhen a diode laser cuts straight through wood, acrylic or leather, the beam and the hot gases it creates hit whatever lies underneath. On a flat surface they reflect back and leave burn marks, smoke stains and rough edges on the underside. The open honeycomb cells let air circulate and smoke diffuse downwards, which reduces carbonisation and keeps both faces of the part clean.\u003c\/p\u003e\n\u003ch2\u003eHolding and Measuring Materials\u003c\/h2\u003e\n\u003cp\u003eFour magnetic material pins are included to hold thin or slightly warped sheets flat and in place, keeping alignment precise across the whole job. Both axes carry inch and centimetre scales for quick measuring, and the 5 mm anti-slip pads stop the panel from shifting inside the machine.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eMade for the xTool S1 enclosed diode laser cutter, in both its 20W and 40W versions. It can also be used with the xTool S1 Riser Base. It is not sized for other xTool machines.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eS1 owners who cut through plywood, MDF, acrylic, felt or leather\u003c\/li\u003e\n\u003cli\u003eMakers selling finished pieces where a clean back face matters\u003c\/li\u003e\n\u003cli\u003eWorkshops replacing a worn or warped cutting bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003exTool S1 Honeycomb Panel\u003c\/li\u003e\n\u003cli\u003e4 magnetic material pins\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. Need the machine as well? See the \u003ca href=\"\/en-no\/products\/xtool-s1-enclosed-diode-laser-cutter\"\u003exTool S1\u003c\/a\u003e enclosed diode laser cutter.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478220915015,"sku":"XTL-S1-HONEYCOMB-ACC","price":185.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-s1-honeycomb-panel-top-view.jpg?v=1792407179"},{"product_id":"xtool-s1-riser-base","title":"xTool Riser Base for S1","description":"\u003cp\u003eThe \u003cstrong\u003exTool Riser Base for S1\u003c\/strong\u003e raises the xTool S1 enclosed diode laser so it can take much taller workpieces: the maximum object height goes from 42 mm on the bare machine to \u003cstrong\u003e125 mm\u003c\/strong\u003e. That is the room you need for the RA2 Pro rotary, for engraving tumblers, bottles and boxes, and for thick blocks of wood or stone. The base plate height adjusts across four positions, and the riser is designed to stop light and smoke leaking out.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003exTool S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum workpiece height\u003c\/td\u003e\n\u003ctd\u003e125 mm (42 mm without riser)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase plate height\u003c\/td\u003e\n\u003ctd\u003e4 positions, pull and push to adjust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct size\u003c\/td\u003e\n\u003ctd\u003e765 × 561 × 106 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct weight\u003c\/td\u003e\n\u003ctd\u003e5.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage\u003c\/td\u003e\n\u003ctd\u003e831 × 276 × 195 mm, 7.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003cp\u003eThe S1 sits on top of the riser, which becomes the new floor of the work area. Instead of shimming material up or being limited to flat stock, you set the base plate to one of four heights to suit the object. Please note xTool's safety guidance: with the Riser Base fitted, the S1 no longer complies with its Class 1 laser safety certification, so wear laser safety glasses while it is running.\u003c\/p\u003e\n\u003ch2\u003eRotary and Conveyor Work\u003c\/h2\u003e\n\u003cp\u003eThe riser is what makes rotary engraving practical on the S1. It provides the height for the xTool RA2 Pro rotary (sold separately) with its roller, chuck, sphere and ring options. It also works with the S1 Automatic Conveyor Feeder (sold separately), which extends the working area to 470 × 3000 mm, and the S1 Honeycomb Panel can be used inside it.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eMade for the xTool S1 enclosed diode laser cutter (20W and 40W versions). Not compatible with other xTool machines.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eS1 owners who want to engrave cups, tumblers and bottles with a rotary\u003c\/li\u003e\n\u003cli\u003eMakers working with thick wood, stone or boxed items\u003c\/li\u003e\n\u003cli\u003eSmall businesses personalising finished products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. Pair it with the \u003ca href=\"\/en-no\/products\/xtool-s1-enclosed-diode-laser-cutter\"\u003exTool S1\u003c\/a\u003e enclosed diode laser cutter.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478221701447,"sku":"XTL-S1-RISER-ACC","price":216.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-s1-riser-base-black.png?v=1792407200"},{"product_id":"xtool-automatic-conveyor-feeder-for-p2s","title":"xTool Automatic Conveyor Feeder for P2S \/ P2","description":"\u003cp\u003eThe \u003cstrong\u003exTool Automatic Conveyor Feeder\u003c\/strong\u003e turns the xTool P2S or P2 into a long-format production laser. It grips the material with anti-slip pressure wheels and feeds it through the riser base passthrough while the machine engraves or cuts, so you can process boards up to \u003cstrong\u003e624 mm wide\u003c\/strong\u003e and, with extra rails, up to \u003cstrong\u003e3 m long\u003c\/strong\u003e without repositioning by hand. Choose the \u003cstrong\u003eBasic\u003c\/strong\u003e kit (2 pairs of rails, 99 cm) or the \u003cstrong\u003eAll-in-One Kit\u003c\/strong\u003e (6 pairs of rails, 228 cm).\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003exTool P2S and xTool P2 (Riser Base required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. processing area\u003c\/td\u003e\n\u003ctd\u003e3000 × 500 mm (with 3 rail add-on kits)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial width\u003c\/td\u003e\n\u003ctd\u003e65–624 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. material thickness\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. speed\u003c\/td\u003e\n\u003ctd\u003e160 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeeder size \/ weight\u003c\/td\u003e\n\u003ctd\u003e687 × 200 × 135 mm, 4.55 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasic kit\u003c\/td\u003e\n\u003ctd\u003e2 pairs of rails: 1 m hard-material support, 0.85 m processing length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll-in-One Kit\u003c\/td\u003e\n\u003ctd\u003eBasic + 2 rail add-on kits (6 pairs): 2.3 m support, 2.15 m processing length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003eDeviation below 2 mm per 1000 mm conveyed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003cp\u003exTool's software plans the engraving path and advances the material automatically, eliminating the alignment errors of manual repositioning. Colour markings help you set roller pressure for each material, a knob fine-tunes position, and alignment grids keep the sheet square. It handles plywood, acrylic and fibreboard as well as felt, cork and EVA; soft material can hang freely without rails.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eFor the \u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S 55W CO2 laser cutter\u003c\/a\u003e and the earlier xTool P2. The xTool Riser Base for P2S \/ P2 is required and sold separately. Extra Conveyor Rails extend the supported length.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSign makers producing long nameplates and banners\u003c\/li\u003e\n\u003cli\u003eFurniture and décor makers cutting long panels\u003c\/li\u003e\n\u003cli\u003eSmall businesses batch-producing parts without manual reloading\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. Add it to the \u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S 55W CO2 laser cutter\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Basic (99 cm)","offer_id":55478221734215,"sku":"XTL-P2-CONV-BASIC-ACC","price":474.0,"currency_code":"EUR","in_stock":true},{"title":"All-in-One Kit (228 cm)","offer_id":55478221766983,"sku":"XTL-P2-CONV-AIO-ACC","price":719.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-automatic-conveyor-feeder-for-p2s-basic-kit.webp?v=1792407200"},{"product_id":"xtool-smart-air-assist-2-0","title":"xTool Smart Air Assist 2.0 for S1 \u0026 M1 Ultra","description":"\u003cp\u003eThe \u003cstrong\u003exTool Smart Air Assist 2.0\u003c\/strong\u003e is xTool's plug-and-play air pump for the xTool S1 and xTool M1 Ultra. It delivers a steady stream of up to \u003cstrong\u003e30 L\/min\u003c\/strong\u003e to the laser's focal point to clear smoke, cool the material surface and keep the lens clean. In Auto mode it sets the airflow itself: low for engraving, high for cutting. It is powered by the machine, so no separate charger is needed.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003exTool S1, xTool M1 Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow\u003c\/td\u003e\n\u003ctd\u003eAdjustable 0–30 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModes\u003c\/td\u003e\n\u003ctd\u003eAuto, plus manual levels (1–2 for engraving, 3–4 for cutting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eDC 24V, supplied by the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct size\u003c\/td\u003e\n\u003ctd\u003e142 × 135 × 105.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct weight\u003c\/td\u003e\n\u003ctd\u003e1.51 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage\u003c\/td\u003e\n\u003ctd\u003e255 × 208 × 158 mm, 2.04 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhy Air Assist Matters\u003c\/h2\u003e\n\u003cp\u003eBlowing air onto the cut quickly lowers the surface temperature of the material, which minimises scorch marks and discolouration, especially with high-power lasers. xTool states it keeps the surface at or below 30 °C. The pressure pushes more air down into the kerf for better burning and deeper penetration, so you get thicker, cleaner cuts, while the airflow keeps smoke and debris away from the laser lens and extends its life.\u003c\/p\u003e\n\u003ch2\u003eBuilt for Long Sessions\u003c\/h2\u003e\n\u003cp\u003eA power stabilisation system keeps the output steady during long jobs: xTool quotes only about 5% airflow loss over time, against 10–15% for traditional air assist systems. Filter cotton stops impurities reaching the pump so it does not clog, and the base is designed to reduce working noise.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eCompatible with the xTool S1 enclosed diode laser cutter and the xTool M1 Ultra 4-in-1 craft machine.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eS1 and M1 Ultra owners who cut wood, acrylic and leather\u003c\/li\u003e\n\u003cli\u003eAnyone fighting burnt edges or smoke stains on light materials\u003c\/li\u003e\n\u003cli\u003eUsers of 20W and 40W modules who want deeper single-pass cuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003exTool Smart Air Assist 2.0\u003c\/li\u003e\n\u003cli\u003eCleaning brush\u003c\/li\u003e\n\u003cli\u003e4 material pins\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. Use it with the \u003ca href=\"\/en-no\/products\/xtool-s1-enclosed-diode-laser-cutter\"\u003exTool S1\u003c\/a\u003e or the \u003ca href=\"\/en-no\/products\/xtool-m1-ultra-the-worlds-first-4-in-1-craft-machine\"\u003exTool M1 Ultra\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478222389575,"sku":"XTL-S1-AIR2-ACC","price":186.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-smart-air-assist-2-0-unit.jpg?v=1792407225"},{"product_id":"xtool-conveyor-rails-for-p2s","title":"xTool Conveyor Rails for P2S \/ P2 (65.8 cm extension)","description":"\u003cp\u003eThe \u003cstrong\u003exTool Conveyor Rails\u003c\/strong\u003e are the add-on rail kit for the xTool Automatic Conveyor Feeder on the P2S and P2. Each kit adds two pairs of rails, extending support by about \u003cstrong\u003e65.8 cm\u003c\/strong\u003e so rigid boards stay level as they travel through the machine. Stack up to three kits on top of the Basic feeder to support hard material up to \u003cstrong\u003e3 m\u003c\/strong\u003e long.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003exTool Automatic Conveyor Feeder on the xTool P2S \/ P2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContents\u003c\/td\u003e\n\u003ctd\u003e2 pairs of rails with supports and fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasic feeder alone\u003c\/td\u003e\n\u003ctd\u003e1 m hard-material support, 0.85 m processing length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e+ 1 rail kit\u003c\/td\u003e\n\u003ctd\u003e1.64 m support, 1.49 m processing length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e+ 2 rail kits\u003c\/td\u003e\n\u003ctd\u003e2.3 m support, 2.15 m processing length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e+ 3 rail kits\u003c\/td\u003e\n\u003ctd\u003e3 m support, 2.85 m processing length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. overhang\u003c\/td\u003e\n\u003ctd\u003e30 cm of unsupported material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhy Add Rails\u003c\/h2\u003e\n\u003cp\u003eHard materials such as plywood, MDF and acrylic need support along their full length; xTool specifies no more than 30 cm hanging free. Without enough rails long boards sag, which hurts feeding accuracy. The buckle design clips each rail to the next without tools, and the rails can be removed when you go back to normal-size jobs. Soft materials like felt or EVA can hang down without rails.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eRequires the xTool Automatic Conveyor Feeder for P2S \/ P2 and the xTool Riser Base, both sold separately. Works with the \u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S 55W CO2 laser cutter\u003c\/a\u003e and the earlier xTool P2. The All-in-One Kit already includes two of these rail kits. Not compatible with the P3 Intelligent Conveyor Feeder.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBasic feeder owners who need to process longer boards\u003c\/li\u003e\n\u003cli\u003eSign and furniture makers cutting panels over 1 m long\u003c\/li\u003e\n\u003cli\u003eWorkshops running continuous batches on the P2S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. Built for the conveyor feeder on the \u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S 55W CO2 laser cutter\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478222487879,"sku":"XTL-P2-CONV-RAIL-ACC","price":165.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-conveyor-rails-for-p2s-rail-kit.webp?v=1792407229"},{"product_id":"xtool-s1-laser-modules","title":"xTool Laser Modules for S1","description":"\u003cp\u003e\u003cstrong\u003exTool Laser Modules for S1\u003c\/strong\u003e are the official swappable laser heads for the xTool S1 enclosed laser. Choose the \u003cstrong\u003e40W diode\u003c\/strong\u003e for thick cutting (up to 18 mm cherry wood in one pass), the \u003cstrong\u003e20W diode\u003c\/strong\u003e for balanced cutting and engraving, or the \u003cstrong\u003e2W 1064 nm infrared\u003c\/strong\u003e module to engrave metals and plastics that a blue diode laser cannot mark. All three work at up to 600 mm\/s, and swap in moments.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLaser type\u003c\/td\u003e\n\u003ctd\u003e40W diode \/ 20W diode \/ 2W 1064 nm infrared\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpot size\u003c\/td\u003e\n\u003ctd\u003e0.08 × 0.10 mm (40W) \/ 0.08 × 0.06 mm (20W) \/ 0.03 × 0.03 mm (IR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking speed\u003c\/td\u003e\n\u003ctd\u003eUp to 600 mm\/s (all modules)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking area\u003c\/td\u003e\n\u003ctd\u003e498 × 319 mm (40W) \/ 498 × 330 mm (20W, IR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOne-pass cut, cherry wood\u003c\/td\u003e\n\u003ctd\u003e18 mm (40W) \/ 10 mm (20W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOne-pass cut, basswood plywood\u003c\/td\u003e\n\u003ctd\u003e15 mm (40W) \/ 10 mm (20W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOne-pass cut, black acrylic\u003c\/td\u003e\n\u003ctd\u003e15 mm (40W) \/ 8 mm (20W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIR module size and weight\u003c\/td\u003e\n\u003ctd\u003e114 × 71 × 77 mm, 560 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware\u003c\/td\u003e\n\u003ctd\u003exTool Creative Space (XCS), LightBurn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhich Module to Choose\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e40W diode\u003c\/strong\u003e is for thick cutting and high-efficiency production. The \u003cstrong\u003e20W diode\u003c\/strong\u003e is the versatile all-rounder for engraving and cutting, with a finer spot. The \u003cstrong\u003e2W 1064 nm IR\u003c\/strong\u003e module does not cut wood; it engraves gold, silver, copper, titanium, aluminium, brass, iron, stainless steel and plastics, and its 0.03 mm spot suits photos, jewellery and business cards.\u003c\/p\u003e\n\u003ch2\u003eDiode Laser Materials\u003c\/h2\u003e\n\u003cp\u003eThe diode modules cut paper, wood, leather, MDF, felt and opaque acrylic, and also engrave bamboo, fabric, dark glass, ceramic, stone, stainless steel and plated or painted metal.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eMade for the xTool S1 enclosed diode laser cutter, whichever laser it shipped with. Not for other xTool machines.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eS1 owners upgrading from 20W to 40W for thicker, faster cuts\u003c\/li\u003e\n\u003cli\u003eJewellery and gift makers adding metal engraving with the IR module\u003c\/li\u003e\n\u003cli\u003eWorkshops keeping a spare head for different jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e40W Diode: laser module, distance sensor, screws, power adapter, hex key and user manual\u003c\/li\u003e\n\u003cli\u003e1064 nm IR (2W) and 20W Diode: the laser module as supplied by xTool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. The modules fit the \u003ca href=\"\/en-no\/products\/xtool-s1-enclosed-diode-laser-cutter\"\u003exTool S1\u003c\/a\u003e enclosed diode laser cutter.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"1064 nm IR (2W)","offer_id":55478222815559,"sku":"XTL-S1-IR2W-ACC","price":668.0,"currency_code":"EUR","in_stock":true},{"title":"20W Diode","offer_id":55478222848327,"sku":"XTL-S1-20W-ACC","price":531.0,"currency_code":"EUR","in_stock":true},{"title":"40W Diode","offer_id":55478222881095,"sku":"XTL-S1-40W-ACC","price":1182.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-s1-laser-modules-2w-ir-module.jpg?v=1792407256"},{"product_id":"xtool-honeycomb-panel-for-p3","title":"xTool Honeycomb Panel for P3","description":"\u003cp\u003eThe \u003cstrong\u003exTool Honeycomb Panel for P3\u003c\/strong\u003e is an all-aluminium honeycomb bed made for the xTool P3 80W CO2 laser. At just \u003cstrong\u003e1.23 kg\u003c\/strong\u003e it is about half the weight of an iron panel, it will not rust from laser heat or cutting residues, and its high-strength aluminium stays flat for precise focus. One panel covers half of the P3 work area; use two to cover the whole bed.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003exTool P3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e100 % aluminium, rust-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel size\u003c\/td\u003e\n\u003ctd\u003e465 × 442 × 19.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing area per panel\u003c\/td\u003e\n\u003ctd\u003e455 × 414 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel weight\u003c\/td\u003e\n\u003ctd\u003e1.23 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. load\u003c\/td\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. workpiece height\u003c\/td\u003e\n\u003ctd\u003e220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eOne panel covers half the work area; two cover all of it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhy Aluminium\u003c\/h2\u003e\n\u003cp\u003eIron honeycomb beds rust over time, especially with resinous woods and cutting oils, and can bow under heat. xTool's aluminium panel resists corrosion and keeps material flat, so small cut parts are fully supported and edges come out clean instead of scorched or rough.\u003c\/p\u003e\n\u003ch2\u003eFlexible Bed Layouts\u003c\/h2\u003e\n\u003cp\u003ePair one honeycomb panel with the P3's standard blade slats: honeycomb on one side for small parts and engraving, slats on the other for cutting large sheets with minimal back marks. Or fit two panels for a full honeycomb bed for batch work.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned exclusively for the \u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3 80W CO2 laser cutter\u003c\/a\u003e. Not compatible with the P2S or P2, which use the Honeycomb Panel 2.0.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eP3 owners cutting small, detailed parts\u003c\/li\u003e\n\u003cli\u003eWorkshops that want a lighter bed that is easy to lift and clean\u003c\/li\u003e\n\u003cli\u003eUsers mixing honeycomb and slats for different jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHoneycomb panel\u003c\/li\u003e\n\u003cli\u003e4 × material pins\u003c\/li\u003e\n\u003cli\u003eCleaning brush\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. Made for the \u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3 80W CO2 laser cutter\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478222913863,"sku":"XTL-P3-HC-ACC","price":222.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-honeycomb-panel-for-p3-main.webp?v=1792407257"},{"product_id":"xtool-m2-cleancut-panel","title":"xTool CleanCut Panel for M2","description":"\u003cp\u003eThe \u003cstrong\u003exTool CleanCut Panel for M2\u003c\/strong\u003e is a set of three slatted panels that sit on the xTool M2's base plate and take the hit when you cut right through a material. They shield the base plate from burn marks and scratches, let smoke escape for cleaner and smoother edges, and keep soft materials flat while you work. Each panel measures \u003cstrong\u003e328 × 153.6 × 9.3 mm\u003c\/strong\u003e; use one, two or three to suit the job.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003exTool M2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanels\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle panel\u003c\/td\u003e\n\u003ctd\u003e328 × 153.6 × 9.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTwo panels\u003c\/td\u003e\n\u003ctd\u003e328 × 300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThree panels\u003c\/td\u003e\n\u003ctd\u003e328 × 446.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel weight\u003c\/td\u003e\n\u003ctd\u003e0.318 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum load\u003c\/td\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum workpiece height\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage\u003c\/td\u003e\n\u003ctd\u003e380 × 196 × 78 mm, 1.33 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eProtect the Base Plate, Cut Cleaner\u003c\/h2\u003e\n\u003cp\u003eEvery cut-through pass sends laser energy into whatever is underneath. The CleanCut Panel puts a durable surface between the beam and the M2's tray, so the base plate stays free of burn marks and scratches. Its open slatted surface lets smoke flow to the extraction instead of being trapped under the part, reducing charring and leaving cleaner faces and sharper edges.\u003c\/p\u003e\n\u003ch2\u003eSteady Support for Soft Materials\u003c\/h2\u003e\n\u003cp\u003eThin and soft materials such as cardstock, sticker paper, felt, fabric and thin leather tend to sag. The panels keep them level so focus stays consistent across the sheet.\u003c\/p\u003e\n\u003ch2\u003eEasy Maintenance\u003c\/h2\u003e\n\u003cp\u003eThe channels are straight and open, so debris comes out with a cleaning brush or a damp cloth. It is designed to stay in the machine, not in a drawer.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eMade to measure for the xTool M2 base plate. Not compatible with other xTool machines.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM2 owners who regularly cut through paper, card, felt or wood\u003c\/li\u003e\n\u003cli\u003eSticker, label and card makers working with soft sheet materials\u003c\/li\u003e\n\u003cli\u003eAnyone wanting to keep the M2's base plate in as-new condition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3 CleanCut panels\u003c\/li\u003e\n\u003cli\u003e1 roll of masking tape\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. Use it with the \u003ca href=\"\/en-no\/products\/xtool-m2-color-craft-laser-cutter-engraver\"\u003exTool M2\u003c\/a\u003e Color Craft laser cutter and engraver.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478223077703,"sku":"XTL-M2-CLEANCUT-ACC","price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-m2-cleancut-panel-three-panels.webp?v=1792407281"},{"product_id":"xtool-mobile-work-stand-for-p3","title":"xTool Mobile Work Stand for P3","description":"\u003cp\u003eThe \u003cstrong\u003exTool Mobile Work Stand for P3\u003c\/strong\u003e is the official rolling stand for the xTool P3 80W CO2 laser cutter. The P3 weighs about 105 kg (231 lbs); on this stand one person can move it around the workshop and lock it in place for work. A heavy-duty steel frame rated to \u003cstrong\u003e200 kg (441 lbs)\u003c\/strong\u003e keeps the machine stable during fast engraving and cutting, and it brings the P3 up to a comfortable working height.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003exTool P3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eHeavy-duty steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. load\u003c\/td\u003e\n\u003ctd\u003e200 kg (441 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCasters\u003c\/td\u003e\n\u003ctd\u003e4 × lockable, 360° swivel, quiet-rolling, floor-safe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003ePre-drilled holes for fitting your own shelf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhy Put the P3 on Wheels\u003c\/h2\u003e\n\u003cp\u003eA 105 kg laser is hard to reposition without help. With the stand you can roll the P3 closer to a window or extraction duct, move it aside for cleaning, or pull it out for loading long boards through the conveyor feeder. Once in position, lock all four casters so the machine stays put during high-speed motion.\u003c\/p\u003e\n\u003ch2\u003eStorage Underneath\u003c\/h2\u003e\n\u003cp\u003eThe open lower frame has reserved holes so you can add a custom shelf for materials, the RA3 rotary or other P3 accessories, keeping everything within reach of the machine.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned for the \u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3 80W CO2 laser cutter\u003c\/a\u003e. It is sized for the P3's footprint and is not intended for other xTool machines.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eP3 owners without a dedicated bench strong enough for a 105 kg machine\u003c\/li\u003e\n\u003cli\u003eShared workshops, schools and makerspaces where the laser needs to move\u003c\/li\u003e\n\u003cli\u003eBusinesses using the P3 conveyor feeder that need room around the machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. The ideal base for the \u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3 80W CO2 laser cutter\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478223110471,"sku":"XTL-P3-STAND-ACC","price":443.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-mobile-work-stand-for-p3-main.webp?v=1792407282"},{"product_id":"xtool-intelligent-conveyor-feeder-for-p3","title":"xTool Intelligent Conveyor Feeder for P3 (150 cm)","description":"\u003cp\u003eThe \u003cstrong\u003exTool Intelligent Conveyor Feeder for P3\u003c\/strong\u003e automates long-format and batch production on the xTool P3. It clamps the material automatically, homes it to the start position and uses the P3's camera with AI seamless tiling to preview the \u003cstrong\u003ewhole sheet\u003c\/strong\u003e, not just part of it. The standard kit handles material up to \u003cstrong\u003e610 × 1500 mm\u003c\/strong\u003e and up to \u003cstrong\u003e26 mm\u003c\/strong\u003e thick at \u003cstrong\u003e200 mm\/s\u003c\/strong\u003e, with 3-axis (X+Y+U) motion control.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003exTool P3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial width\u003c\/td\u003e\n\u003ctd\u003e101.6–610 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. thickness\u003c\/td\u003e\n\u003ctd\u003e26 mm wood, 20 mm acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial length, standard kit\u003c\/td\u003e\n\u003ctd\u003e1500 mm placeable, 1300 mm processable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWith extra rail sets\u003c\/td\u003e\n\u003ctd\u003e2200 \/ 2900 \/ 3600 mm with 1 \/ 2 \/ 3 extra sets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. speed\u003c\/td\u003e\n\u003ctd\u003e200 mm\/s (160 mm\/s under heavy loads)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotion control\u003c\/td\u003e\n\u003ctd\u003e3-axis X+Y+U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eWood, acrylic, fibreboard, felt, EVA, cork, leather\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eSmarter Than a Basic Conveyor\u003c\/h2\u003e\n\u003cp\u003eOn the P2S feeder you only see a partial preview. On the P3, AI seamless tiling stitches high-resolution camera images into a complete preview of the material, so patterns line up across the full length. Roller pressure adjusts to the material thickness, full-length rollers keep the feed smooth and non-slip, and the work area is 111 % larger than the P2S standard feeder (610 × 1300 mm vs 500 × 750 mm).\u003c\/p\u003e\n\u003ch2\u003eInstall Once, Always Ready\u003c\/h2\u003e\n\u003cp\u003eThe base mounts once on the back of the P3 and never blocks the normal work area. Suspended rails take 1500 mm boards without an extra support table, and rubber strips reduce laser and smoke leakage at the feed opening.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned exclusively for the \u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3 80W CO2 laser cutter\u003c\/a\u003e. Not compatible with the P2S or P2, which use the Automatic Conveyor Feeder.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSign, décor and furniture makers producing long panels\u003c\/li\u003e\n\u003cli\u003eBusinesses batch-producing items from full sheets\u003c\/li\u003e\n\u003cli\u003eP3 owners who want hands-off loading and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. Built for the \u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3 80W CO2 laser cutter\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478223896903,"sku":"XTL-P3-CONV-ACC","price":676.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-intelligent-conveyor-feeder-for-p3-main.webp?v=1792407312"},{"product_id":"xtool-m2-modules","title":"xTool Modules for M2","description":"\u003cp\u003e\u003cstrong\u003exTool Modules for M2\u003c\/strong\u003e add new capabilities to the xTool M2 Color Craft laser. Choose the \u003cstrong\u003e20W 455 nm diode laser\u003c\/strong\u003e to cut thicker material (10 mm basswood plywood or cherry wood in one pass), the \u003cstrong\u003e3W 1064 nm infrared laser\u003c\/strong\u003e for permanent engraving on metal, or the \u003cstrong\u003eCMYK inkjet printing module\u003c\/strong\u003e for full-colour printing at 1200 × 1200 dpi on wood, paper, acrylic and fabric.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModules\u003c\/td\u003e\n\u003ctd\u003e20W 455 nm diode laser \/ 3W 1064 nm infrared laser \/ CMYK inkjet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking area\u003c\/td\u003e\n\u003ctd\u003e430 × 324 mm (20W) \/ 430 × 310 mm (3W IR) \/ 340 × 308 mm (CMYK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum speed\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s (lasers) \/ 150 mm\/s (CMYK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20W one-pass cut\u003c\/td\u003e\n\u003ctd\u003e10 mm basswood plywood, 10 mm cherry wood, 10 mm black acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3W IR materials\u003c\/td\u003e\n\u003ctd\u003eIron, silver, gold, brass, aluminium, plastics, rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMYK resolution\u003c\/td\u003e\n\u003ctd\u003e1200 × 1200 dpi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMYK ink\u003c\/td\u003e\n\u003ctd\u003eApprox. 40 ml, 4 separate colours, water-based\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003e20W Diode Laser\u003c\/h2\u003e\n\u003cp\u003eCompared with the M2's 10W module, the 20W cuts 10 mm instead of 8 mm basswood plywood, 10 mm instead of 3 mm black acrylic, and runs 3 mm basswood at 15 mm\/s instead of 8 mm\/s.\u003c\/p\u003e\n\u003ch2\u003e3W Infrared Laser\u003c\/h2\u003e\n\u003cp\u003eInfrared gives darker, cleaner and permanent marks on metal, where diode lasers struggle. Ideal for jewellery, flasks, pet tags and serialised labels; it marks but does not cut.\u003c\/p\u003e\n\u003ch2\u003eCMYK Inkjet Printing Module\u003c\/h2\u003e\n\u003cp\u003ePrint full-colour designs, then cut them with the diode laser without moving the piece or aligning by hand. Adding black to CMY gives deeper contrast. The ink is water-based, so keep printed items away from water; cartridges are replaced, not refilled.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eExclusively for the xTool M2; not interchangeable with the M1 Ultra or other xTool machines. The M2 runs one module at a time, swapped in seconds.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM2 owners who need thicker or faster cuts\u003c\/li\u003e\n\u003cli\u003eJewellery and gift makers adding metal engraving\u003c\/li\u003e\n\u003cli\u003eSticker and label sellers who want print-then-cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e20W Diode Laser: module, power adapter, user manual\u003c\/li\u003e\n\u003cli\u003e3W IR Laser: module, art scratch paper, user manual\u003c\/li\u003e\n\u003cli\u003eCMYK Inkjet Printing Module: module, ink cartridge, bottom cap, retainer plate and screw, moisturising liquid, A5 calibration card, ferrite core\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. All three modules fit the \u003ca href=\"\/en-no\/products\/xtool-m2-color-craft-laser-cutter-engraver\"\u003exTool M2\u003c\/a\u003e Color Craft laser cutter and engraver.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"20W Diode Laser","offer_id":55478223962439,"sku":"XTL-M2-20W-ACC","price":604.0,"currency_code":"EUR","in_stock":true},{"title":"3W IR Laser","offer_id":55478223995207,"sku":"XTL-M2-3WIR-ACC","price":504.0,"currency_code":"EUR","in_stock":true},{"title":"CMYK Inkjet Printing Module","offer_id":55478224027975,"sku":"XTL-M2-CMYK-ACC","price":171.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-m2-modules-20w-diode-module.webp?v=1792407315"},{"product_id":"xtool-5w-ir-laser-module-for-p3","title":"xTool 5W IR Laser Module for P3","description":"\u003cp\u003eThe \u003cstrong\u003exTool 5W IR Laser Module\u003c\/strong\u003e adds a 1064 nm infrared laser to the xTool P3, so the same machine that cuts wood and acrylic with CO2 can also mark metals and engineering plastics. With a \u003cstrong\u003e0.03 mm\u003c\/strong\u003e spot, five times finer than the P3's 0.15 mm CO2 spot, it reproduces tiny text and photos on gold, silver, copper, aluminium and plastics at up to \u003cstrong\u003e1000 mm\/s\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003exTool P3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLaser\u003c\/td\u003e\n\u003ctd\u003e5 W pulsed infrared, 1064 nm ± 1 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpot size\u003c\/td\u003e\n\u003ctd\u003e0.03 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse width \/ repetition rate\u003c\/td\u003e\n\u003ctd\u003e4 ns \/ 25–30 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak power \/ pulse energy\u003c\/td\u003e\n\u003ctd\u003e49–65 kW \/ \u0026gt;0.14 mJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFocal length\u003c\/td\u003e\n\u003ctd\u003e49 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking area\u003c\/td\u003e\n\u003ctd\u003e650 × 426 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. speed\u003c\/td\u003e\n\u003ctd\u003eUp to 1000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule size \/ weight\u003c\/td\u003e\n\u003ctd\u003e136.5 × 94.5 × 92.5 mm, 850 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling \/ power\u003c\/td\u003e\n\u003ctd\u003eAir cooled, powered by the P3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated lifetime\u003c\/td\u003e\n\u003ctd\u003e8000 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhat IR Adds to a CO2 Laser\u003c\/h2\u003e\n\u003cp\u003eCO2 light is reflected by bare metal, so a CO2 laser cannot mark it without marking spray. The 1064 nm wavelength is absorbed by metals and many plastics, giving permanent, detailed marks on jewellery, tags, tools, electronics casings and drinkware without coatings.\u003c\/p\u003e\n\u003ch2\u003eQuick Swap\u003c\/h2\u003e\n\u003cp\u003eThe module mounts on the P3 gantry and draws power from the main unit, so you can switch from a large-format CO2 job in wood to precision metal marking in seconds.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned exclusively for the \u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3 80W CO2 laser cutter\u003c\/a\u003e. Not compatible with the P2S or P2.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eJewellery and gift businesses personalising metal\u003c\/li\u003e\n\u003cli\u003eWorkshops marking serial numbers and logos on parts\u003c\/li\u003e\n\u003cli\u003eP3 owners who want metal engraving without a second machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5W IR laser module\u003c\/li\u003e\n\u003cli\u003eConnecting rod\u003c\/li\u003e\n\u003cli\u003eFocusing block\u003c\/li\u003e\n\u003cli\u003eCalibration paper\u003c\/li\u003e\n\u003cli\u003eGrease\u003c\/li\u003e\n\u003cli\u003eL-shaped wrench\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. Upgrade your \u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3 80W CO2 laser cutter\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478225600839,"sku":"XTL-P3-IR5W-ACC","price":837.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-5w-ir-laser-module-for-p3-main.webp?v=1792407339"},{"product_id":"xtool-foot-pedal-f-series","title":"xTool Foot Pedal Switch for F-Series Lasers","description":"\u003cp\u003eThe xTool Foot Pedal Switch lets you start, pause and repeat jobs on xTool F-Series galvo lasers without touching the machine. Both hands stay free to position the next piece, and the laser head is never nudged by pressing the on-board button – useful when you engrave the same design on dozens of items in a row.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible machines\u003c\/td\u003e\n\u003ctd\u003exTool F1, F1 Lite, F2, F1 Ultra, F2 Ultra, F2 Ultra UV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e177 x 109 x 81 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight with packaging\u003c\/td\u003e\n\u003ctd\u003e330 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable length\u003c\/td\u003e\n\u003ctd\u003e250 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody\u003c\/td\u003e\n\u003ctd\u003eAluminium alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe pedal plugs into the machine’s accessory port and mirrors the start button:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMachine ready – step once to start processing\u003c\/li\u003e\n\u003cli\u003eWhile processing – step once to pause\u003c\/li\u003e\n\u003cli\u003ePaused – step once to continue\u003c\/li\u003e\n\u003cli\u003eJob complete or on standby – double-step to run the previous file again\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat It Replaces\u003c\/h2\u003e\u003cp\u003eReaching for the button on top of the F1 after each piece can shift the machine or your material by a fraction of a millimetre. The pedal removes that movement and reduces hand fatigue during long batch sessions. The aluminium-alloy body is light, sits flat on the floor and has a 2.5 m cable, long enough to reach under most workbenches.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-no\/products\/xtool-f1-portable-high-speed-laser-engraver\"\u003exTool F1\u003c\/a\u003e and F1 Lite\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003exTool F2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver\"\u003exTool F1 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-ultra-60w-mopa-40w-diode-dual-laser-engraver\"\u003exTool F2 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-ultra-uv-5w-uv-laser-engraver\"\u003exTool F2 Ultra UV\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn the F1, the pedal uses its own port, so it can run together with the Slide Extension or RA2 Pro and the Desktop Air Purifier.\u003c\/p\u003e\u003ch2\u003eWho It’s For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSellers engraving keyrings, tags, pens and jewellery in batches\u003c\/li\u003e\n\u003cli\u003eEvent and pop-up personalisation where speed per piece matters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. It is an inexpensive upgrade for the \u003ca href=\"\/en-no\/products\/xtool-f1-portable-high-speed-laser-engraver\"\u003exTool F1 portable laser engraver\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478227337543,"sku":"XTL-F-PEDAL-ACC","price":42.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-foot-pedal-f-series-foot-pedal.jpg?v=1792407462"},{"product_id":"xtool-auto-streamline-conveyor","title":"xTool Auto Streamline Conveyor for F1 Ultra, F2 Ultra \u0026 F2 Ultra UV","description":"\u003cp\u003eThe xTool Auto Streamline Conveyor turns the xTool F1 Ultra, F2 Ultra and F2 Ultra UV into a continuous batch-production line. It extends the processing area from 220 x 220 mm to 500 x 220 mm, carries objects of up to 10 kg, and works with the machine’s camera so xTool Creative Space can recognise every piece on the belt and place the design on each one.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible machines\u003c\/td\u003e\n\u003ctd\u003exTool F1 Ultra, F2 Ultra, F2 Ultra (single laser), F2 Ultra UV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. processing area\u003c\/td\u003e\n\u003ctd\u003e500 x 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. material thickness\u003c\/td\u003e\n\u003ctd\u003eLess than 81.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. load\u003c\/td\u003e\n\u003ctd\u003e10 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct size\u003c\/td\u003e\n\u003ctd\u003e1002 x 290 x 89 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct weight\u003c\/td\u003e\n\u003ctd\u003e8.545 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage size\u003c\/td\u003e\n\u003ctd\u003e1120 x 400 x 175 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBelt \/ frame\u003c\/td\u003e\n\u003ctd\u003ePU belt (California Proposition 65 certified) on an aluminium-alloy frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking temperature\u003c\/td\u003e\n\u003ctd\u003e0–35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003ePlace a row of blanks on the belt. The camera identifies the shape and position of each object, xTool Creative Space aligns the artwork to every piece, and the conveyor advances automatically so the next items move into the laser field. Fastening pieces lock the conveyor to the machine, keeping the full 500 mm area accurately positioned throughout the job. It arrives pre-assembled.\u003c\/p\u003e\u003ch2\u003eWhat It Replaces\u003c\/h2\u003e\u003cp\u003eInstead of loading, engraving and unloading one small tray at a time, you load once and let the laser work through the batch. That suits rush orders of keyrings, metal tags, business cards and wooden spoons, as well as long single pieces such as photo panels up to 500 mm.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver\"\u003exTool F1 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-no\/products\/xtool-f2-ultra-60w-mopa-40w-diode-dual-laser-engraver\"\u003exTool F2 Ultra\u003c\/a\u003e (dual-laser and single-laser versions)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-ultra-uv-5w-uv-laser-engraver\"\u003exTool F2 Ultra UV\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003exTool lists the conveyor only for these Ultra models. For the standard F1 and F2, use the xTool Slide Extension instead.\u003c\/p\u003e\u003ch2\u003eWho It’s For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePersonalisation businesses handling large batch orders\u003c\/li\u003e\n\u003cli\u003eMakers selling engraved tags, jewellery and promotional items\u003c\/li\u003e\n\u003cli\u003eWorkshops that want unattended, repeatable production\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. Pair it with the \u003ca href=\"\/en-no\/products\/xtool-f2-ultra-60w-mopa-40w-diode-dual-laser-engraver\"\u003exTool F2 Ultra 60W MOPA \u0026amp; 40W diode laser\u003c\/a\u003e for a compact production cell.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478227730759,"sku":"XTL-AUTO-CONVEYOR-ACC","price":535.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-auto-streamline-conveyor-conveyor.jpg?v=1792407495"},{"product_id":"xtool-slide-extension-f1-f2","title":"xTool Slide Extension for F1 \u0026 F2","description":"\u003cp\u003eThe xTool Slide Extension is a motorised sliding bed for the xTool F1 and F2 that moves material under the laser, enlarging the working area four times: from 115 x 115 mm to 115 x 400 mm. It arrives pre-assembled, plugs into the machine with a single cable and keeps the F1’s speed, focus and framing tools, so long pieces and rows of small items can be engraved or cut in one job.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible machines\u003c\/td\u003e\n\u003ctd\u003exTool F1, F1 Lite, F2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking area\u003c\/td\u003e\n\u003ctd\u003e115 x 400 mm (F1 alone: 115 x 115 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e565 x 230 x 110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.55 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial holding\u003c\/td\u003e\n\u003ctd\u003e5 clamps; cutting panel with airflow space under the material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRulers\u003c\/td\u003e\n\u003ctd\u003eMetric (mm) and imperial (inch) scale rulers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware\u003c\/td\u003e\n\u003ctd\u003exTool Creative Space (XCS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eLay the material on the bed and read its exact position off the scale rulers: the coordinates on the extension match those in xTool Creative Space. Manual or auto focus and frame\/outline preview work as they do on the F1; during preview you turn the knob to move the bed and check the whole area. Press once and the extension advances automatically, engraving and cutting the full design. The cutting panel leaves space under the material for airflow, giving a cleaner cut edge. Two clamps lock thin sheets along the edges, and three more hold thicker or irregular objects.\u003c\/p\u003e\u003ch2\u003eGood to Know\u003c\/h2\u003e\u003cp\u003eOn the F1, the Slide Extension shares an accessory port with the RA2 Pro rotary, so only one of them can be connected at a time. The foot pedal and Desktop Air Purifier use their own ports and can run alongside it.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-no\/products\/xtool-f1-portable-high-speed-laser-engraver\"\u003exTool F1\u003c\/a\u003e and F1 Lite\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003exTool F2\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNot listed by xTool for the F1 Ultra, F2 Ultra or F2 Ultra UV; for those machines use the xTool Auto Streamline Conveyor.\u003c\/p\u003e\u003ch2\u003eWho It’s For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eF1 and F2 owners who need longer pieces such as signs, rulers and photo strips\u003c\/li\u003e\n\u003cli\u003eSellers engraving rows of pens, keyrings or tags in one go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSlide Extension (pre-assembled)\u003c\/li\u003e\n\u003cli\u003e5 clamps\u003c\/li\u003e\n\u003cli\u003eConnection cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. Add it to the \u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003exTool F2 5W IR \u0026amp; 15W diode portable laser\u003c\/a\u003e for four times the working length.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478228910407,"sku":"XTL-F-SLIDE-EXT-ACC","price":227.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-slide-extension-f1-f2-slide-extension.webp?v=1792407520"},{"product_id":"xtool-air-purifier-go-f2","title":"xTool Air Purifier Go for F2","description":"\u003cp\u003eThe xTool Air Purifier Go is a pipe-free, backpack-style fume filter made exclusively for the xTool F2. It clips onto the back of the machine, weighs just 1.34 kg and passes smoke through four filtration layers, so you can engrave at a craft fair, a pop-up stand or a home desk without a window or an exhaust hose.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible machine\u003c\/td\u003e\n\u003ctd\u003exTool F2 only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003e4 layers: pre-filter, HEPA, modified carbon, HEPA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e150 x 150 x 250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.34 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003eBelow 63 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation\u003c\/td\u003e\n\u003ctd\u003eNo buttons; powered from the F2 via DC splitter cable; airflow adapts to engraving or cutting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE, FCC, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement filter\u003c\/td\u003e\n\u003ctd\u003exTool Filter Kit for Air Purifier Go (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eAir passes a pre-filter that catches larger particles, a HEPA layer for fine dust and smoke, a modified-carbon layer that absorbs odours, gases and VOCs, and a second HEPA layer before it leaves the unit. There are no buttons: connect it to the F2 with the supplied DC power splitter cable and it starts with the laser, adjusts airflow automatically to the engraving or cutting job, and keeps running for a few seconds after the laser stops to clear remaining fumes.\u003c\/p\u003e\u003ch2\u003eMaintenance\u003c\/h2\u003e\u003cp\u003eTo change the filter, switch off and unplug, open the front cover, slide out the used filter and insert a new one. For high-frequency daily use, xTool recommends replacing it about every two weeks; avoid materials that generate heavy dust or strong odours to extend its life.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003exTool F2\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIt does not fit the F2 Ultra, F1 or other xTool machines. For a fixed workshop with several lasers, the \u003ca href=\"\/en-no\/products\/xtool-safetypro-ap2\"\u003exTool SafetyPro AP2\u003c\/a\u003e offers more capacity.\u003c\/p\u003e\u003ch2\u003eWho It’s For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eF2 owners personalising at markets, fairs and events\u003c\/li\u003e\n\u003cli\u003eHome studios without a window for venting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAir Purifier Go\u003c\/li\u003e\n\u003cli\u003eDC power splitter cable\u003c\/li\u003e\n\u003cli\u003eG4 filter cotton\u003c\/li\u003e\n\u003cli\u003eScrews, washers and sealing ring\u003c\/li\u003e\n\u003cli\u003eQuick start guide and safety instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. It is the natural companion to the \u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003exTool F2 portable dual laser\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478229532999,"sku":"XTL-AP-GO-F2-ACC","price":161.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-air-purifier-go-f2-purifier.webp?v=1792407544"},{"product_id":"xtool-ra2-pro-rotary","title":"xTool RA2 Pro 4-in-1 Rotary Attachment","description":"\u003cp\u003eThe xTool RA2 Pro is a 4-in-1 rotary attachment that lets xTool lasers engrave round and curved objects: tumblers, mugs, bottles, rolling pins, balls, baubles and rings. It switches between roller, chuck, sphere and ring modes and covers diameters from 3 mm up to 198 mm in roller mode, so one rotary handles most cylindrical work in a small shop.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotary modes\u003c\/td\u003e\n\u003ctd\u003eRoller, chuck, sphere, ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngraving diameter\u003c\/td\u003e\n\u003ctd\u003eRoller 3–198 mm · Chuck 0–100 mm · Sphere 25–100 mm · Ring 11–70 mm (larger sizes may need risers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChuck\u003c\/td\u003e\n\u003ctd\u003e50 mm chuck, 4:1 gear ratio; double-step and single-step jaws with soft pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct size\u003c\/td\u003e\n\u003ctd\u003e321 x 138 x 105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct weight\u003c\/td\u003e\n\u003ctd\u003e1.96 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage\u003c\/td\u003e\n\u003ctd\u003e460 x 182 x 95 mm, 2.33 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware\u003c\/td\u003e\n\u003ctd\u003exTool Creative Space, LightBurn, LightGRBL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFour Modes, One Base\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRoller\u003c\/strong\u003e suits long or large items such as wine bottles and irregular cylinders. \u003cstrong\u003eChuck\u003c\/strong\u003e grips cups, mugs with handles and flasks for precise vector engraving; the base can be reversed to make room for large mugs. \u003cstrong\u003eSphere\u003c\/strong\u003e engraves balls and ornaments from 25 to 100 mm, and \u003cstrong\u003eRing\u003c\/strong\u003e handles rings from 11 to 70 mm. The RA2 Pro ships pre-assembled with a level tool, tape measure and hex key; the separable level tool keeps long and irregular cylinders centred, and the jaw profiles can be 3D printed to fit unusual objects.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-no\/products\/xtool-f1-portable-high-speed-laser-engraver\"\u003exTool F1\u003c\/a\u003e \/ F1 Lite\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver\"\u003exTool F1 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003exTool F2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-ultra-60w-mopa-40w-diode-dual-laser-engraver\"\u003exTool F2 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-ultra-uv-5w-uv-laser-engraver\"\u003exTool F2 Ultra UV\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-s1-enclosed-diode-laser-cutter\"\u003exTool S1\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S\u003c\/a\u003e \/ P2\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-m1-ultra-the-worlds-first-4-in-1-craft-machine\"\u003exTool M1 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-m1-smart-laser-engraver-and-vinyl-cutter\"\u003exTool M1\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003exTool D1 \/ D1 Pro\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003exTool does not list the RA2 Pro for the P3 or M2 – for those, choose the \u003ca href=\"\/en-no\/products\/xtool-ra3-rotary\"\u003exTool RA3 \/ RA3 Lite rotary\u003c\/a\u003e. On the F1, the RA2 Pro shares an accessory port with the Slide Extension, so only one can be connected at a time. The 26° adjust module, laser positioning module and limit piece belong to the separate RA2 Pro accessory kit and are not included.\u003c\/p\u003e\u003ch2\u003eWho It’s For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGift and personalisation shops engraving drinkware\u003c\/li\u003e\n\u003cli\u003eJewellers engraving rings\u003c\/li\u003e\n\u003cli\u003eMakers who want one rotary across several xTool machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. It pairs well with the \u003ca href=\"\/en-no\/products\/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver\"\u003exTool F1 Ultra fibre and diode laser\u003c\/a\u003e for metal tumblers and rings.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478231826759,"sku":"XTL-RA2-PRO-ACC","price":278.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-ra2-pro-rotary-rotary.jpg?v=1792407574"},{"product_id":"xtool-desktop-air-purifier","title":"xTool Desktop Air Purifier for F1, F2, M1 Ultra \u0026 M2","description":"\u003cp\u003eThe xTool Desktop Air Purifier is a compact, sealed fume filter that sits next to an xTool F1, F2, M1 Ultra or M2 and cleans laser smoke without venting outdoors. Three filtration layers – including a double-layer H13 True HEPA filter – capture 99.97% of particles down to 0.3 μm, while activated carbon absorbs gases and odours, at 55 dB or less.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible machines\u003c\/td\u003e\n\u003ctd\u003exTool F1, F2, M1 Ultra, M2 (M2 needs the exhaust duct adapter for M2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003ePre-filter (≥5 μm), double-layer H13 True HEPA, activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency\u003c\/td\u003e\n\u003ctd\u003e99.97% of particles down to 0.3 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e55 dB or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFan speeds\u003c\/td\u003e\n\u003ctd\u003e3 levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e285 x 190 x 296 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 V \/ 2.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eUSB Type-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eConnect the purifier to the laser and, in linked mode, it starts when the job starts and pauses 10 seconds after it ends for an extra clean. Three fan speeds are available: xTool suggests the low or middle level for infrared jobs and the maximum level for diode laser work. A pre-filter catches visible particles of 5 μm and larger, protecting the HEPA layer; the carbon layer handles smell and harmful gases.\u003c\/p\u003e\u003ch2\u003eMaintenance\u003c\/h2\u003e\u003cp\u003ePress the button to lift the lid, take out the used filter pack, drop in a new one and close the lid. Two spare pre-filters are included; xTool recommends replacing the filter pack after three pre-filters have been used. Replacement packs are sold separately. For sensitive users, the included exhaust pipe lets you vent outdoors as well.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f1-portable-high-speed-laser-engraver\"\u003exTool F1\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003exTool F2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-m1-ultra-the-worlds-first-4-in-1-craft-machine\"\u003exTool M1 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-m2-color-craft-laser-cutter-engraver\"\u003exTool M2\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe M2 requires xTool’s Desktop Air Purifier exhaust duct adapter for M2, which is not included here. For the P2S, P3, F1 Ultra, S1 or M1, choose the \u003ca href=\"\/en-no\/products\/xtool-safetypro-ap2\"\u003exTool SafetyPro AP2\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWho It’s For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHome and apartment users without a window to vent through\u003c\/li\u003e\n\u003cli\u003eClassrooms and shared studios that need quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesktop Air Purifier\u003c\/li\u003e\n\u003cli\u003eFilter pack\u003c\/li\u003e\n\u003cli\u003eExhaust pipe and pipe adapter\u003c\/li\u003e\n\u003cli\u003e2 spare pre-filters\u003c\/li\u003e\n\u003cli\u003ePower adapter and power cable\u003c\/li\u003e\n\u003cli\u003eUSB Type-C cable\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. It is the recommended indoor partner for the \u003ca href=\"\/en-no\/products\/xtool-m2-color-craft-laser-cutter-engraver\"\u003exTool M2 colour craft laser\u003c\/a\u003e and the F-Series.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478232711495,"sku":"XTL-DESKTOP-AP-ACC","price":411.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-desktop-air-purifier-purifier.webp?v=1792407601"},{"product_id":"xtool-safetypro-if2-inline-duct-fan","title":"xTool SafetyPro IF2 2.0 Inline Duct Fan","description":"\u003cp\u003eThe xTool SafetyPro IF2 2.0 is a compact inline duct fan that pulls laser smoke out of the machine and vents it outdoors. Two fans spinning at 14,000 RPM, driven by a 55 W brushless motor, deliver 1300 Pa of suction in a housing of just 182 x 125 x 129 mm – around 5.5 times smaller than a traditional inline fan – and it switches on and off with your xTool laser.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow\u003c\/td\u003e\n\u003ctd\u003e140 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuction power\u003c\/td\u003e\n\u003ctd\u003e1300 Pa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e55 W brushless, dual fans at 14,000 RPM each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFan speed settings\u003c\/td\u003e\n\u003ctd\u003e4 speeds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntelligent control\u003c\/td\u003e\n\u003ctd\u003eYes – auto start\/stop with supported xTool lasers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDuct diameter\u003c\/td\u003e\n\u003ctd\u003e3 inch (76 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct size\u003c\/td\u003e\n\u003ctd\u003e182 x 125 x 129 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct weight\u003c\/td\u003e\n\u003ctd\u003e1.15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eFit the IF2 2.0 between the laser’s 3-inch exhaust port and a duct leading outside. On supported machines it starts and stops automatically with the job, you can set a delay so it keeps running after the laser stops, and it selects a suitable ventilation mode from the material chosen in the software. Four manual speed settings are available on every machine. Noise-reducing cotton inside the housing keeps operation quieter, and the fan detaches easily and can be rinsed with water for cleaning. The 2.3 m PP duct folds freely, so the laser does not have to sit next to a window.\u003c\/p\u003e\u003ch2\u003eDuct Fan or Air Purifier?\u003c\/h2\u003e\u003cp\u003eThe IF2 2.0 is the right choice when you can vent outdoors: it removes smoke rather than filtering it, with no filters to replace. If you cannot vent outside, choose a filtering unit such as the \u003ca href=\"\/en-no\/products\/xtool-safetypro-ap2\"\u003exTool SafetyPro AP2\u003c\/a\u003e instead.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eManual and automatic modes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003exTool F2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver\"\u003exTool F1 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-no\/products\/xtool-f2-ultra-60w-mopa-40w-diode-dual-laser-engraver\"\u003exTool F2 Ultra\u003c\/a\u003e (both versions)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-ultra-uv-5w-uv-laser-engraver\"\u003exTool F2 Ultra UV\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-s1-enclosed-diode-laser-cutter\"\u003exTool S1\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-m1-ultra-the-worlds-first-4-in-1-craft-machine\"\u003exTool M1 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003exTool OS1 Automatic Shaker Oven\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManual mode only:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-no\/products\/xtool-f1-portable-high-speed-laser-engraver\"\u003exTool F1\u003c\/a\u003e, F1 Lite\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-m1-smart-laser-engraver-and-vinyl-cutter\"\u003exTool M1\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003exTool P2\u003c\/li\u003e\n\u003cli\u003exTool D Series\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It’s For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCO2 and diode laser users with a window or wall vent\u003c\/li\u003e\n\u003cli\u003eWorkshops and classrooms short on floor space\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. It is an efficient extraction upgrade for the \u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3 80W CO2 laser cutter\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Default Title","offer_id":55478233137479,"sku":"XTL-IF2-2-ACC","price":201.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-safetypro-if2-inline-duct-fan-duct-fan.webp?v=1792407631"},{"product_id":"xtool-screen-printer","title":"xTool Screen Printer – Laser Screen Printing Machine","description":"\u003cp\u003eThe xTool Screen Printer combines traditional screen printing with your xTool laser. Instead of coating emulsion, drying it in a darkroom and exposing it under UV light, the laser engraves your design straight into a pre-coated screen in 1 to 30 minutes, and the Screen Printer then applies the ink to T-shirts, tote bags, paper and wood.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eVersions\u003c\/td\u003e\n\u003ctd\u003eStandard frame 292 x 406 mm (P\/F\/S\/D Series) · Compact frame 228 x 304 mm (M Series)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStencil creation\u003c\/td\u003e\n\u003ctd\u003e1–30 minutes with an xTool laser, depending on design and machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen life\u003c\/td\u003e\n\u003ctd\u003eUp to 1,500 prints per xTool coated screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ-axis AutoPress\u003c\/td\u003e\n\u003ctd\u003ePrints on objects up to 60 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003e30-second EasyStretch frame, quick-release clamp, 60° hover hinge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRegistration\u003c\/td\u003e\n\u003ctd\u003e3-axis micro registration (X, Y, Z) for multi-colour alignment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eFrom Design to Print\u003c\/h2\u003e\u003cp\u003eLoad your artwork in xTool software, which can separate colours into CMYK and create halftones in one click. Place the coated screen in its frame and engrave it with the laser, then clip the frame into the printer, add ink and pull the squeegee. The EasyStretch frame tensions a screen in about 30 seconds, the hinge lets the screen hover at up to 60° so ink does not drip, and the piston-driven Z-axis adjusts automatically to objects up to 60 mm thick.\u003c\/p\u003e\u003ch2\u003eWhich Version Do I Need?\u003c\/h2\u003e\u003cp\u003eBoth versions share the same mechanism; only the frame size differs to suit your laser. Choose the \u003cstrong\u003estandard frame\u003c\/strong\u003e for P, F, S and D Series machines and the \u003cstrong\u003ecompact frame\u003c\/strong\u003e for the M Series. Multi-colour printing needs extra frames, screens, inks and a frame fixing piece; the F1 does not support multi-colour kits. On the P2 and P2S, a riser base is needed with the standard frame.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eStandard frame:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S\u003c\/a\u003e \/ P2\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f1-portable-high-speed-laser-engraver\"\u003exTool F1\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver\"\u003exTool F1 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003exTool F2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-ultra-60w-mopa-40w-diode-dual-laser-engraver\"\u003exTool F2 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-ultra-uv-5w-uv-laser-engraver\"\u003exTool F2 Ultra UV\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-s1-enclosed-diode-laser-cutter\"\u003exTool S1\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003exTool D1 \/ D1 Pro\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompact frame:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-m1-smart-laser-engraver-and-vinyl-cutter\"\u003exTool M1\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-m1-ultra-the-worlds-first-4-in-1-craft-machine\"\u003exTool M1 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It’s For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSmall apparel brands and merch makers\u003c\/li\u003e\n\u003cli\u003eCraft studios, stationers and classrooms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003exTool Screen Printer\u003c\/li\u003e\n\u003cli\u003eOne screen printing frame (size per version)\u003c\/li\u003e\n\u003cli\u003eOne laser-engravable coated screen\u003c\/li\u003e\n\u003cli\u003eA bottle of black ink\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. For fast stencils, pair it with the \u003ca href=\"\/en-no\/products\/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver\"\u003exTool F1 Ultra\u003c\/a\u003e.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Standard 292 x 406 mm – P\/F\/S\/D Series","offer_id":55478234087751,"sku":"XTL-SCREEN-PRN-STD-ACC","price":305.0,"currency_code":"EUR","in_stock":true},{"title":"Compact 228 x 304 mm – M Series","offer_id":55478234120519,"sku":"XTL-SCREEN-PRN-M-ACC","price":305.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-screen-printer-screen-printer.webp?v=1792407666"},{"product_id":"xtool-laser-material-kits","title":"xTool Laser Material Kits – Explore \u0026 Ultimate","description":"\u003cp\u003exTool Selected laser material kits give you a box of tested, ready-to-use blanks for engraving and cutting on xTool machines, so you can try new materials without buying full packs of each. Choose the \u003cstrong\u003eExplore Kit\u003c\/strong\u003e with 111 pieces across 17 popular materials, or the \u003cstrong\u003eUltimate Kit\u003c\/strong\u003e with 155 pieces across 27 materials for a wider range of crafts.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eExplore Kit\u003c\/td\u003e\n\u003ctd\u003e111 pieces, 17 materials, plus 172 auxiliary pieces; stored in 6 kraft-paper boxes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate Kit\u003c\/td\u003e\n\u003ctd\u003e155 pieces, 27 materials; includes inspiration book and free design files\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial types\u003c\/td\u003e\n\u003ctd\u003ePlywood, acrylic, cork, felt, laserable PU and leatherette, card and paper, metal, rock and glass coasters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing\u003c\/td\u003e\n\u003ctd\u003eCO2, diode (blue-light) and UV laser engraving; CO2 and diode cutting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSettings\u003c\/td\u003e\n\u003ctd\u003eTested parameters in the xTool Material EasySet library\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eExplore Kit (111 pcs)\u003c\/h2\u003e\u003cp\u003e4 basswood plywood and 2 walnut plywood sheets, 2 black glossy acrylic sheets, 4 cork sheets (2 pre-cut), PU mouse pad, 6 felt sheets, 3 laserable PU\/leatherette sheets, 2 rock coasters, 20 kraft cards, 40 coloured cards, 10 PU patches, 8 metal business cards, a stainless-steel folding spoon and 9 stainless-steel tags.\u003c\/p\u003e\u003ch2\u003eUltimate Kit (155 pcs)\u003c\/h2\u003e\u003cp\u003eBasswood and walnut plywood, glossy black, frosted black and iridescent acrylic, a two-tone engraving sheet, cork, 6 felt sheets, shimmer vinyl, kraft, shrink, scratch, marking and photo papers, PU sheets and patches, a denim bag, a rubber stamp set, rock and glass coasters, 10 wooden keychains, 40 metal business cards, 2 card holders and 26 metal jewellery pieces.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eExplore Kit materials can be engraved or cut on all xTool machines. In the Ultimate Kit, the iridescent transparent acrylic can only be cut and engraved by CO2 machines (P Series), shimmer vinyl gives the best results on the S1, and all other materials suit every xTool machine except 2 W infrared lasers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-p3-80w-flagship-co2-laser-cutter-with-intelligent-automation\"\u003exTool P3\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-p2s-55w-desktop-co2-laser-cutter\"\u003exTool P2S\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-s1-enclosed-diode-laser-cutter\"\u003exTool S1\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f2-5w-ir-15w-diode-portable-dual-laser-engraver\"\u003exTool F2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver\"\u003exTool F1 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-m2-color-craft-laser-cutter-engraver\"\u003exTool M2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-no\/products\/xtool-m1-ultra-the-worlds-first-4-in-1-craft-machine\"\u003exTool M1 Ultra\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It’s For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNew xTool owners learning settings\u003c\/li\u003e\n\u003cli\u003eMakers sampling materials before ordering in bulk\u003c\/li\u003e\n\u003cli\u003eClassrooms and maker spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\u003cp\u003eEolas Prints is an official xTool reseller based in Cantabria, Spain, shipping across Spain and the EU with EU warranty and support included. Add a kit to your order with the \u003ca href=\"\/en-no\/products\/xtool-m2-color-craft-laser-cutter-engraver\"\u003exTool M2\u003c\/a\u003e or any xTool laser.\u003c\/p\u003e","brand":"xTool","offers":[{"title":"Explore Kit (111 pcs)","offer_id":55478234382663,"sku":"XTL-MAT-EXPLORE-111-ACC","price":135.0,"currency_code":"EUR","in_stock":true},{"title":"Ultimate Kit (155 pcs)","offer_id":55478234415431,"sku":"XTL-MAT-ULTIMATE-155-ACC","price":206.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/xtool-laser-material-kits-explore-kit.webp?v=1792407698"}],"url":"https:\/\/eolasprints.com\/en-no\/collections\/laser-accessories.oembed","provider":"Eolas Prints","version":"1.0","type":"link"}