Eolas Prints Filament Profiles in ElegooSlicer: Built-in Setup Guide

All 18 Eolas Prints PLA, PETG, ABS, ASA and TPU filaments have profiles built into ElegooSlicer, starting with version 1.5.0.6. There is nothing to download or import: in the Prepare tab, click Set filaments to use, filter the vendor list by Eolas Prints and tick your materials. The profiles work with the Elegoo Centauri Carbon, Centauri Carbon 2, Centauri, Neptune 4 and Neptune 3 series, OrangeStorm Giga and every other printer you add to ElegooSlicer.

Last updated 7 October 2026, checked against ElegooSlicer 1.5.3.5. Eolas Prints profiles are included in every ElegooSlicer release since 1.5.0.6.

Key facts

• What: ElegooSlicer filament profiles for all 18 Eolas Prints filaments (9 PLA, 3 PETG, ABS, ASA and 4 TPU).
• Where: built into ElegooSlicer’s filament library under the vendor Eolas Prints – no download, no import.
• Version: ElegooSlicer 1.5.0.6 or newer on Windows, macOS or Linux.
• Printers: Elegoo Centauri Carbon and Centauri Carbon 2, Centauri and Centauri 2, Neptune 4 and Neptune 3 series, OrangeStorm Giga and any other printer in ElegooSlicer.
• Settings: identical to the Eolas Prints profiles built into OrcaSlicer.
• Price: free, like ElegooSlicer itself.

How to enable Eolas Prints profiles in ElegooSlicer

The profiles are already installed with ElegooSlicer – you only choose which ones appear in your filament list.

1. Update ElegooSlicer to version 1.5.0.6 or newer from the official ElegooSlicer releases.
2. Open the Prepare tab and select your printer, for example the Centauri Carbon.
3. In the Filament section, click the Set filaments to use icon next to the + and – buttons.
4. In the filament selection window, filter the vendor list by Eolas Prints, tick the materials you use and confirm.
5. Pick the Eolas Prints profile in the filament dropdown for each extruder or Canvas slot and slice.

Which printers are supported?

The Eolas Prints profiles live in ElegooSlicer’s shared filament library, so they are available for every printer you set up: the Elegoo Centauri Carbon, Centauri Carbon 2, Centauri and Centauri 2, Neptune 4, 4 Pro, 4 Plus and 4 Max, the Neptune 3 series and the OrangeStorm Giga – and the other brands ElegooSlicer supports, such as Bambu Lab, Creality, Anycubic and Flashforge.

Print settings for each Eolas Prints material

These are the values inside the ElegooSlicer profiles, tuned on a 0.4 mm nozzle and PEI build plate. They are also a reliable starting point in any other slicer.

Max flow is the maximum volumetric speed for a 0.4 mm hotend. Cooling, retraction and flow ratio start from the generic profile for each material type and can be fine-tuned in the filament settings.

Can't find Eolas Prints in ElegooSlicer?

• Check your version under Help → About. Eolas Prints is included from ElegooSlicer 1.5.0.6 – update if you are on 1.3 or older.
• If the vendor is installed but the materials are not in your dropdown, open Set filaments to use again and make sure they are ticked.
• Type Eolas in the search box of the filament list to jump straight to the profiles.
• Still stuck? Email support@eolasprints.com with your ElegooSlicer version and printer model.

Tips for printing Eolas Prints filaments with ElegooSlicer

• Calibrate once per material: run the flow rate and pressure advance tests from the Calibration menu – the steps in our OrcaSlicer calibration guide work the same way in ElegooSlicer.
• Centauri Carbon: its enclosure suits Eolas ABS and ASA. For PLA, open the lid or top vent to keep the chamber cool.
• Multi-colour (Canvas): all Eolas Prints 1.75 mm filaments ship on plastic spools. Feed flexible TPU 93A and D53 directly rather than through a multi-colour unit.
• Save your tweaks: if you change a setting, save it as your own preset so ElegooSlicer updates never overwrite it.

Other slicers

The same Eolas Prints profiles are built into OrcaSlicer and PrusaSlicer, and available as free downloads for Bambu Studio and Orca-Flashforge (Flash Studio).

Frequently asked questions

Does ElegooSlicer have Eolas Prints filament profiles?

Yes. All 18 Eolas Prints filaments have profiles in ElegooSlicer’s built-in filament library, under the vendor Eolas Prints, from ElegooSlicer 1.5.0.6 onwards.

Do I need to download anything?

No. The profiles install with ElegooSlicer. Open Set filaments to use in the Prepare tab, filter by Eolas Prints and tick the materials you need.

Which ElegooSlicer version do I need?

ElegooSlicer 1.5.0.6 or newer. We recommend the latest release, as profile improvements ship with each update.

Do the profiles work on the Elegoo Centauri Carbon?

Yes. They work on the Centauri Carbon and Centauri Carbon 2, the Centauri series, the Neptune 4 and 3 series and the OrangeStorm Giga, as well as other brands in ElegooSlicer.

Are the ElegooSlicer profiles the same as in OrcaSlicer?

Yes. ElegooSlicer is based on OrcaSlicer and ships the same Eolas Prints profiles with identical print settings.

Can I print Eolas ABS and ASA on the Centauri Carbon?

Yes. The Centauri Carbon is enclosed, which helps ABS and ASA avoid warping. Use the Eolas Prints ABS or ASA profile and keep the lid closed.

Should I still calibrate after loading a profile?

The profile gets you most of the way. For the cleanest results, run a quick flow rate and pressure advance calibration on your machine.

About the author
Sergio Peciña is a qualified Electrical & Electronics Engineer and Eolas Prints' Technical Design Engineer, with over 10 years of experience in 3D printing. He founded the maker spaces at the University of La Rioja and IDIVAL Santander. Every Eolas Prints filament is manufactured in-house in Cantabria, Spain, to ISO 9001 and ISO 14001 standards.

Shop the filaments these profiles are made for: PLA | PETG | ABS | ASA | TPU – ISO-certified, made in Spain.