{"title":"Flashforge 3D Printers","description":"\u003cp\u003eEolas Prints is an authorised Flashforge distributor, offering the full range of Flashforge 3D printers with genuine manufacturer warranty, authentic spares, and EU shipping from Spain. Flashforge has become one of the most respected names in fast, capable, value-focused 3D printing — CoreXY speed, enclosed chambers, multi-colour, and large-format industrial machines, typically at a noticeably lower price than comparable premium brands.\u003c\/p\u003e\n\u003ch2\u003eChoosing a Flashforge Printer\u003c\/h2\u003e\n\u003cp\u003eThe Flashforge range splits into clear tiers by capability:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast entry (Adventurer 5M, 5M Pro):\u003c\/strong\u003e High-speed CoreXY machines reaching 600 mm\/s. The open-frame 5M is the most affordable way in for PLA, PETG, and TPU; the enclosed 5M Pro adds HEPA + carbon filtration and a sealed chamber for reliable ABS and ASA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-colour (AD5X, Creator 5):\u003c\/strong\u003e The AD5X prints up to four colours via its built-in Intelligent Filament System (IFS); the Creator 5 uses FlashSwap — four independent toolheads that physically swap in seconds, eliminating almost all purge waste.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosed multi-colour engineering (Creator 5 Pro):\u003c\/strong\u003e The Creator 5 Pro adds a fully enclosed, actively heated chamber (up to 65 °C) and dual filtration to the four-toolhead system, handling ABS, ASA, PC, and nylon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge-format industrial (Guider 3 Ultra):\u003c\/strong\u003e A dual-extruder, fully enclosed workhorse with a 330 × 330 × 600 mm build volume, 350 °C nozzles, and HEPA filtration — built for continuous production and engineering composites.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Flashforge\u003c\/h2\u003e\n\u003cp\u003eFlashforge machines pair genuinely fast CoreXY motion with practical, hands-off features — auto-levelling, quick-swap nozzles, built-in cameras, filament run-out detection, and power-loss recovery — and run the open Orca-Flashforge slicer. The result is serious capability without the premium price, which is exactly why Flashforge has become a favourite for schools, makerspaces, prosumers, and production workshops alike.\u003c\/p\u003e\n\u003ch2\u003ePair It with Filament Made in Spain\u003c\/h2\u003e\n\u003cp\u003eEvery Flashforge printer runs beautifully on our own \u003ca href=\"\/en-it\/collections\/3d-printer-filament\"\u003ePLA, PETG, TPU, ABS, and ASA filament\u003c\/a\u003e, manufactured in Cantabria to ISO and REACH standards.\u003c\/p\u003e\n\u003ch2\u003eBuy Flashforge from an Authorised Distributor\u003c\/h2\u003e\n\u003cp\u003eAs an authorised Flashforge distributor, Eolas Prints supplies genuine Flashforge machines with full manufacturer warranty and EU support, shipped from Spain. Not sure which model fits your materials and workflow? \u003ca href=\"\/en-it\/pages\/contact\"\u003eContact us\u003c\/a\u003e — we advise before you buy. You can also read our complete \u003ca href=\"\/en-it\/blogs\/advanced-3d-printing\/flashforge-printer-buyers-guide\"\u003eFlashforge printer buyer's guide\u003c\/a\u003e comparing every model in the range.\u003c\/p\u003e","products":[{"product_id":"flashforge-adventurer-5m","title":"Flashforge Adventurer 5M","description":"\u003cp\u003eThe Flashforge Adventurer 5M is a high-speed open-frame FDM 3D printer at entry-level pricing, designed for users who prioritise print speed and ease of setup over enclosure capability. With a 600 mm\/s maximum speed, direct drive extruder, auto-levelling, and a dual-sided PEI build plate, it competes significantly above its price point on raw specification. It is a practical first printer for hobbyists, a fast workhorse for print farms, and a capable prototyping machine for schools and small studios.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — Cartesian\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e220 × 220 × 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax print speed\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax acceleration\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e280°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder\u003c\/td\u003e\n\u003ctd\u003eDirect drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed levelling\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild surface\u003c\/td\u003e\n\u003ctd\u003eDual-sided PEI spring steel plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eOpen frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetup time\u003c\/td\u003e\n\u003ctd\u003eOut of box — under 10 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003e600 mm\/s — What High Speed Means at This Price\u003c\/h2\u003e\n\u003cp\u003eMost FDM printers in the €200–400 range operate at 100–200 mm\/s for quality output. The Adventurer 5M's 600 mm\/s maximum (with 20,000 mm\/s² acceleration) reduces print time for standard parts by 50–70% compared to conventional machines. In practice, print quality at 300–400 mm\/s is comparable to many machines running at their maximum rated speed — the 5M's input shaping and motion control algorithms compensate for resonance artefacts that would normally appear at high acceleration. For print farm operators or high-volume hobbyists, this throughput advantage is the primary reason to choose the 5M.\u003c\/p\u003e\n\n\u003ch2\u003eDirect Drive — Why It Matters\u003c\/h2\u003e\n\u003cp\u003eThe direct drive extruder places the drive mechanism directly above the hot end rather than at a distance via a Bowden tube. This improves retraction control, reduces stringing, and makes the printer significantly more capable with flexible materials (TPU) than a Bowden setup. For a machine at this price, direct drive is a meaningful specification advantage.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG, ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU (direct drive handles flexible reliably)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Open frame — ABS printing requires careful ambient temperature management to reduce warping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHobbyists and makers who want the fastest possible print times at entry-level cost\u003c\/li\u003e\n\u003cli\u003eSchools and education labs needing a simple, fast, well-supported machine\u003c\/li\u003e\n\u003cli\u003ePrint farm operators running high-volume PLA\/PETG jobs on a cost-per-machine basis\u003c\/li\u003e\n\u003cli\u003eEngineers and designers who need fast, quality PLA\/PETG prototypes from a compact desktop machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an authorised Flashforge reseller based in Cantabria, Spain. EU warranty and support included.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":49585451761991,"sku":"FLF-A5M-3D-PRN","price":299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-adventurer-5m-3d-printer-digital-379.webp?v=1759097305"},{"product_id":"flashforge-adventurer-5m-pro","title":"Flashforge Adventurer 5M Pro","description":"\u003cp\u003eThe Flashforge Adventurer 5M Pro is a fully enclosed, high-speed FDM 3D printer with built-in air filtration — the enclosed and filtered version of the Adventurer 5M. At 499€ it delivers a complete package: 600 mm\/s maximum speed, direct drive extruder, automatic levelling, dual-sided PEI plate, and an active HEPA + activated carbon dual filtration system inside a closed chamber. The enclosure makes it appropriate for printing ABS, ASA, and engineering materials that require thermal stability, and for environments (offices, classrooms, shared workspaces) where open-frame printing is not acceptable due to fumes or particles.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — Cartesian\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e220 × 220 × 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax print speed\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax acceleration\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder\u003c\/td\u003e\n\u003ctd\u003eDirect drive — quick-release nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed levelling\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild surface\u003c\/td\u003e\n\u003ctd\u003eDual-sided PEI spring steel plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eFully enclosed — with internal and external air circulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003eDual filtration — HEPA + activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetup time\u003c\/td\u003e\n\u003ctd\u003eUnder 10 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAdventurer 5M Pro vs 5M — Which to Choose\u003c\/h2\u003e\n\u003cp\u003eThe 5M and 5M Pro share the same CoreXY motion system, direct drive extruder, and 600 mm\/s maximum speed. The differences are enclosure, filtration, and nozzle temperature ceiling. Choose the \u003cstrong\u003e5M Pro\u003c\/strong\u003e if you: print ABS, ASA, or any material that benefits from a warm chamber environment; work in an office, school, or shared space where VOCs and particles from open-frame printing are a concern; want the quick-release nozzle system for faster material and nozzle changes; or regularly print materials above 280°C. Choose the \u003cstrong\u003e5M\u003c\/strong\u003e if you: primarily print PLA and PETG in a ventilated workshop; want the lowest cost entry point; and have no enclosure requirement.\u003c\/p\u003e\n\n\u003ch2\u003e300°C Nozzle Temperature\u003c\/h2\u003e\n\u003cp\u003eThe Pro's 300°C nozzle ceiling (vs 280°C on the standard 5M) opens up PA-12 Nylon and some PC Blend grades alongside the standard PLA\/PETG\/ABS range. Combined with the enclosed chamber, the 5M Pro is a capable machine for functional engineering materials at this price point.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG, ABS, ASA — fully enclosed, good warping resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e PA-12 Nylon, PC Blend (up to 300°C nozzle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite:\u003c\/strong\u003e PLA-CF, PETG-CF (hardened nozzle recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigners and engineers who print ABS, ASA, or Nylon and need enclosure stability at an accessible price\u003c\/li\u003e\n\u003cli\u003eOffices, schools, and shared studios requiring filtered, enclosed printing\u003c\/li\u003e\n\u003cli\u003eHigh-volume users who want the 5M's speed with materials that require thermal control\u003c\/li\u003e\n\u003cli\u003eMakers who want a single machine covering the full standard-to-engineering material range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an authorised Flashforge reseller based in Cantabria, Spain. EU warranty and support included.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":50337703559495,"sku":"FLF-A5M-PRO-3D-PRN","price":499.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-adventurer-5m-pro-3d-printer-digital-848.webp?v=1759097357"},{"product_id":"flashforge-5m-5m-pro-nozzles","title":"Flashforge 5M \u0026 5M Pro Nozzles","description":"\u003cp\u003eEnhance your 3D printing experience with Flashforge 5M and 5M Pro nozzles, available from Eolas Prints. These high-quality 3D printer accessories are designed to optimize performance and precision for your Flashforge 3D printer. Crafted from durable materials, these nozzles ensure consistent extrusion and improved print quality across various filament types.\u003c\/p\u003e\n\u003cp\u003eCompatible with Flashforge 5M and 5M Pro models, these nozzles offer versatility for different printing needs. Whether you're working on intricate designs or larger projects, these pro nozzles deliver reliable results.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"0.2 mm","offer_id":51818407559495,"sku":"FLF-A5M-0-2MM-NZL","price":36.9,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":51818415423815,"sku":"FLF-A5M-0-4MM-NZL","price":34.9,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":51818415456583,"sku":"FLF-A5M-0-6MM-NZL","price":36.9,"currency_code":"EUR","in_stock":false},{"title":"0.8 mm","offer_id":51818453860679,"sku":"FLF-A5M-0-8MM-NZL","price":36.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-5m-pro-nozzles-four-3d-printer-521.webp?v=1750893372"},{"product_id":"flashforge-guider-3-ultra","title":"Flashforge Guider 3 Ultra","description":"\u003cp\u003eThe Flashforge Guider 3 Ultra is a professional large-format enclosed FDM 3D printer designed for industrial, engineering, and production environments where build volume, speed, and reliability all need to operate at scale simultaneously. With a 350×350×600 mm build volume — the largest Z-height in the Flashforge lineup — 500 mm\/s maximum print speed, CoreXY motion, and dual-layer HEPA 13 + activated carbon filtration, it is the correct machine for batch production of large functional parts, end-use components, and tall engineering assemblies that exceed desktop printer capacity.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY, fully enclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e350 × 350 × 600 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax print speed\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax acceleration\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e350°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ-axis\u003c\/td\u003e\n\u003ctd\u003eDual ball screw — reinforced for stability on tall prints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003eDual-layer HEPA 13 + activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle options\u003c\/td\u003e\n\u003ctd\u003e0.4 mm, 0.6 mm, 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e7-inch colour touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed levelling\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eAluminium chassis — industrial grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, Ethernet, USB — remote management\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament monitoring\u003c\/td\u003e\n\u003ctd\u003eRunout detection and auto-resume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003e350×350×600 mm — Why the Z-Height Matters\u003c\/h2\u003e\n\u003cp\u003eMost desktop and prosumer printers cap out at 250–300 mm Z-height. The Guider 3 Ultra's 600 mm Z-height changes the category of parts that can be printed without splitting. Full-size automotive trim components, tall architectural models, large industrial fixtures, 600mm-height batch towers for small parts — these require either a machine with this Z capacity or an assembly step. The dual ball screw Z-axis ensures that the 600mm travel stays accurate and stable, without the wobble and deviation that single-lead-screw systems exhibit at extended heights.\u003c\/p\u003e\n\n\u003ch2\u003e350°C Nozzle — Engineering Material Range\u003c\/h2\u003e\n\u003cp\u003eThe 350°C nozzle temperature ceiling covers the full range of engineering thermoplastics: PLA, PETG, ABS, ASA, PA-12 Nylon, PA-CF, PEEK, PEI\/Ultem, and PC. Combined with the enclosed chamber and 120°C bed, the Guider 3 Ultra handles the same material set as dedicated high-temperature desktop systems, in a platform sized for production volumes.\u003c\/p\u003e\n\n\u003ch2\u003eHEPA 13 + Carbon Filtration\u003c\/h2\u003e\n\u003cp\u003eHEPA 13 is the standard used in medical and cleanroom environments — it captures 99.95% of particles ≥0.3 microns. Combined with activated carbon for VOC and odour adsorption, the dual-layer system makes the Guider 3 Ultra appropriate for office buildings, shared workspaces, and facilities where fume management is a regulatory or health requirement. Printing ABS, ASA, or Nylon all day in an unfiltered machine is not acceptable in many commercial environments; HEPA 13 filtration is.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG, ABS, ASA, HIPS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e PA-12 Nylon, PA-CF, PC Blend, CPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-performance:\u003c\/strong\u003e PEEK, PEI\/Ultem (up to 350°C nozzle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite:\u003c\/strong\u003e Carbon-fibre and glass-fibre filled materials (hardened nozzle required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIndustrial design teams producing large-format prototypes and end-use parts that exceed standard desktop printer capacity\u003c\/li\u003e\n\u003cli\u003eEngineering departments running continuous production of functional components in Nylon, PC, and CF-filled materials\u003c\/li\u003e\n\u003cli\u003eAutomotive and aerospace prototyping teams requiring tall assemblies and large structural parts in a single print\u003c\/li\u003e\n\u003cli\u003eManufacturing facilities needing a certified-filtration enclosed machine for compliance with workplace air quality standards\u003c\/li\u003e\n\u003cli\u003eProfessional service bureaux running high-throughput FDM production across a range of engineering materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an authorised Flashforge reseller based in Cantabria, Spain, serving industrial and professional customers across Europe. EU warranty and support included.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":51940395614535,"sku":"FLF-GDR-3-ULT-3D-PRN","price":4199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-guider-3-ultra-black-enclosed-3d-983.webp?v=1752755782"},{"product_id":"flashforge-ad5x-multi-colour","title":"Flashforge AD5X Multi-Colour","description":"\u003cp\u003eThe Flashforge Adventurer AD5X is a fully enclosed, dual-filament FDM 3D printer that brings multi-colour and multi-material printing to the Adventurer series. With two independent filament inputs, automatic filament switching, and an enclosed chamber, the AD5X enables dual-colour prints, soluble support removal, and two-material functional parts in a compact desktop machine at an accessible price point.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — Cartesian, enclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e220 × 220 × 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament inputs\u003c\/td\u003e\n\u003ctd\u003eDual — automatic switching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax print speed\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder\u003c\/td\u003e\n\u003ctd\u003eDirect drive — upgraded for dual-material operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed levelling\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild surface\u003c\/td\u003e\n\u003ctd\u003eDual-sided PEI spring steel plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eFully enclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDual Filament — What It Enables\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDual-colour printing\u003c\/strong\u003e — the most common application: two colours in a single print without manual filament changes. The AD5X switches between spools automatically during the print. Purge requirements between colour changes mean some waste per transition, but the workflow is fully automated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoluble support removal\u003c\/strong\u003e — using a water-soluble support material (PVA) alongside the main filament. Supports dissolve in water, leaving clean underhangs and overhangs with no manual support removal and no surface marks. This is the most practical benefit for engineering and prototype users.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti-material functional parts\u003c\/strong\u003e — for example, a rigid ABS structure with a TPU overmoulded grip section, or a Nylon structural component with a softer interface surface. The 300°C nozzle ceiling enables material pairings that require elevated temperatures.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG, ABS, ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e PA-12 Nylon, PC Blend\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoluble supports:\u003c\/strong\u003e PVA (compatible with PLA pairing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite:\u003c\/strong\u003e PLA-CF, PETG-CF (hardened nozzle recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigners producing multi-colour prototypes and display models without post-painting\u003c\/li\u003e\n\u003cli\u003eEngineers who want soluble support capability in a compact enclosed machine\u003c\/li\u003e\n\u003cli\u003eMakers experimenting with two-material functional parts at an accessible price point\u003c\/li\u003e\n\u003cli\u003eStudios that need dual-colour output with the reliability of an enclosed system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an authorised Flashforge reseller based in Cantabria, Spain. EU warranty and support included.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":52227556344135,"sku":"FLF-AD5X-3D-PRN","price":399.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-ad5x-multi-colour-3d-printer-two-439.webp?v=1756320499"},{"product_id":"flashforge-creator-5-high-speed-multi-colour-3d-printer","title":"Flashforge Creator 5 High-Speed Multi-Colour 3D Printer","description":"\u003cp\u003e\u003cb\u003eHigh-Speed, Zero-Waste Multi-Colour 3D Printing for Innovators\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Flashforge Creator 5 is a next-generation FDM 3D printer engineered to completely transform how multi-material and multi-colour models are made. Featuring a revolutionary FlashSwap system of four independent toolheads, it completely eliminates purge waste and speeds up multi-colour printing by up to 500%. Combined with extreme 600 mm\/s travel speeds, fully automatic calibration, and a versatile 256 × 256 × 256 mm build volume, the Creator 5 delivers a seamless, highly efficient workflow for rapid prototyping and batch production.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e4 Independent Toolheads (FlashSwap):\u003c\/b\u003e Print with up to four colours or materials in a single pass with zero purge towers, drastically saving on filament costs and print time. Each toolhead has its own nozzle, extruder, and heater — swapping takes approximately 7 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtreme Speed \u0026amp; Precision:\u003c\/b\u003e Maximum travel speed of 600 mm\/s and acceleration up to 30,000 mm\/s², reducing production times without sacrificing quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFully Automated Calibration:\u003c\/b\u003e Smart sensors handle bed levelling, Z-offset, and dynamic flow control automatically to guarantee flawless first layers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdvanced Material Support:\u003c\/b\u003e Reaching nozzle temperatures of 320°C and bed temperatures of 120°C, it handles PLA, PETG, TPU, PLA-CF, PETG-CF, PET, SILK, PVA, and BVOH. Soluble PVA supports dissolve in water for complex geometries — a key advantage of tool-changing over single-nozzle systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSmart Monitoring:\u003c\/b\u003e Built-in Full HD 1080p camera, filament runout detection, and power loss recovery ensure your prints finish successfully\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMulti-Printer Management:\u003c\/b\u003e Fleet management capabilities over Wi-Fi, USB, and LAN make it effortless to scale up production on a 3D print farm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzle Options:\u003c\/b\u003e Compatible with 0.25 mm, 0.4 mm, 0.6 mm, and 0.8 mm hardened steel nozzles for different detail and speed requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePerfect For\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEducational labs and makerspaces\u003c\/li\u003e\n\u003cli\u003e3D print farms and small batch manufacturing\u003c\/li\u003e\n\u003cli\u003eDetailed multi-colour prototyping\u003c\/li\u003e\n\u003cli\u003eCosplay and scale model creation\u003c\/li\u003e\n\u003cli\u003eUsers looking to eliminate filament purge waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat's in the Box\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlashforge Creator 5 3D Printer\u003c\/li\u003e\n\u003cli\u003eTextured Flexible PEI Build Plate\u003c\/li\u003e\n\u003cli\u003ePower Cable \u0026amp; Accessories Kit\u003c\/li\u003e\n\u003cli\u003eQuick Start Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed engineering materials or a controlled printing environment? See the \u003cb\u003eFlashforge Creator 5 Pro\u003c\/b\u003e — the enclosed version with active 65°C chamber heating, HEPA 13 filtration, and full support for ABS, ASA, PC, and Nylon. Note: the Creator 5 cannot be upgraded to the Pro as they have structural differences.\u003c\/p\u003e\n\u003cp\u003eMaximise your creative output and eliminate filament waste with the Flashforge Creator 5 — multi-colour printing, redefined for efficiency.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":54099365560647,"sku":"FLF-CR5-3D-PRN","price":899.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-creator-5-high-speed-multi-colour-3d-printer-gray-981.webp?v=1780841299"},{"product_id":"flashforge-creator-5-pro-enclosed-industrial-3d-printer","title":"Flashforge Creator 5 Pro Enclosed Industrial 3D Printer","description":"\u003cp\u003e\u003cb\u003eProfessional Enclosed Multi-Colour 3D Printing for Industrial Applications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Flashforge Creator 5 Pro takes the groundbreaking zero-waste, four-toolhead FlashSwap technology of the Creator 5 and houses it in a fully enclosed, industrial-grade chassis. Designed for engineering and advanced manufacturing, the Pro model features active chamber heating up to 65°C and an advanced HEPA 13 dual-filtration system. This ensures flawless dimensional accuracy and zero warping when printing demanding, high-performance materials like ABS, ASA, PC, and Nylon (PA), while maintaining a safe and fume-free workspace.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eActive Chamber Heating:\u003c\/b\u003e Rapidly heats and maintains the enclosed chamber up to 65°C, preventing warping and layer splitting in advanced engineering materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e4 Independent Toolheads (FlashSwap):\u003c\/b\u003e Zero purge waste and up to 500% faster multi-colour and multi-material printing — each toolhead swaps in approximately 7 seconds with its own nozzle, extruder, and heater\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTop-Tier Air Filtration:\u003c\/b\u003e A medical-grade HEPA 13 filter combined with activated coconut carbon eliminates ultra-fine particles (UFPs) and VOCs for safe indoor use\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-Speed Performance:\u003c\/b\u003e Highly rigid CoreXY structure achieving 600 mm\/s travel speeds and 30,000 mm\/s² acceleration for rapid part delivery\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIntelligent Auto-Calibration:\u003c\/b\u003e Fully automated multi-toolhead offset calibration and auto-levelling for perfectly aligned, hands-free printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUnmatched Material Range:\u003c\/b\u003e Safely print high-strength filaments including ABS, ASA, PC, PA, PC-ABS, PPS-CF, PAHT-CF, PPA-CF, and carbon fibre (CF) composite variants\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSafety \u0026amp; Control:\u003c\/b\u003e Door-open detection automatically pauses the print; built-in HD camera provides remote monitoring via fleet management software\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzle Options:\u003c\/b\u003e Compatible with 0.25 mm, 0.4 mm, 0.6 mm, and 0.8 mm hardened steel nozzles for different detail and speed requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePerfect For\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineering design and functional prototyping\u003c\/li\u003e\n\u003cli\u003eIndustrial parts manufacturing and jigs\u003c\/li\u003e\n\u003cli\u003eAerospace and automotive applications\u003c\/li\u003e\n\u003cli\u003eProfessional 3D print farms\u003c\/li\u003e\n\u003cli\u003eEnvironments requiring strict safety and air quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat's in the Box\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlashforge Creator 5 Pro 3D Printer\u003c\/li\u003e\n\u003cli\u003eTextured Flexible PEI Build Plate\u003c\/li\u003e\n\u003cli\u003ePower Cable \u0026amp; Tool Kit\u003c\/li\u003e\n\u003cli\u003eHEPA \u0026amp; Carbon Filters (Pre-installed)\u003c\/li\u003e\n\u003cli\u003eQuick Start Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor open-frame multi-colour printing with PLA, PETG, and TPU at a lower entry price, see the \u003cb\u003eFlashforge Creator 5\u003c\/b\u003e. Note: the Creator 5 Pro cannot be downgraded to the standard Creator 5 — they have structural differences and are sold separately.\u003c\/p\u003e\n\u003cp\u003eTake industrial 3D printing to the next level with the Flashforge Creator 5 Pro — where professional enclosed reliability meets zero-waste multi-material innovation.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":54099512230215,"sku":"FLF-CR5-P-3D-PRN","price":1049.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-creator-5-pro-enclosed-industrial-3d-printer-silver-black-855.webp?v=1780841533"}],"url":"https:\/\/eolasprints.com\/en-it\/collections\/flashforge.oembed","provider":"Eolas Prints","version":"1.0","type":"link"}