{"product_id":"eufymake-exhaust-fan-kit","title":"eufyMake Exhaust Fan Kit for E1 UV Printer","description":"\u003cp\u003eThe eufyMake Exhaust Fan Kit is the dedicated ventilation system for the eufyMake E1 UV printer. A custom duct draws fumes straight from the printer and a compact centrifugal fan pushes them outdoors through a 1 m or 3 m hose, with a window adapter included. It runs as quietly as 40 dB in Silent Mode and is the simpler option when your workspace has a window or external vent.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eFan speed\u003c\/td\u003e\n\u003ctd\u003e4,300 RPM · 3 speed levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir pressure\u003c\/td\u003e\n\u003ctd\u003e480 Pa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e48 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003e50 dB (as low as 40 dB in Silent Mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExhaust hoses\u003c\/td\u003e\n\u003ctd\u003e1 m and 3 m, 5.08 cm (2 in) diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWindow adapter\u003c\/td\u003e\n\u003ctd\u003e2 in to 5.62 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e215 × 180 × 198 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.45 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBalanced Airflow for Clean Prints\u003c\/h2\u003e\n\u003cp\u003eToo much suction around the print zone causes ink drift. eufyMake tuned the duct and all three fan modes to exhaust fumes without affecting print quality: Silent for after printing or when quiet matters, Standard for flat printing, and Strong for 3D-textured jobs. A larger-diameter centrifugal fan provides high static pressure, and the duct captures fumes even when printing with the lid open.\u003c\/p\u003e\n\u003ch2\u003eEasy Installation\u003c\/h2\u003e\n\u003cp\u003eThe fan snaps on and off in about five seconds, and the duct attaches directly to the E1. Place the fan on the desk or wall-mount it with the bracket kit, then vent straight outside or through the supplied window adapter, so the window does not need to be fully open.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned for the eufyMake E1 3D-Texture UV Printer. Choose this kit if you can vent outdoors; if not, the eufyMake Purifier P1 filters fumes inside the room.\u003c\/p\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eE1 owners working near a window or external vent\u003c\/li\u003e\n\u003cli\u003eSmall studios wanting low running costs with no filters to replace\u003c\/li\u003e\n\u003cli\u003eUsers who want quick odour removal during textured printing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust fan and power adapter\u003c\/li\u003e\n\u003cli\u003eExhaust duct and duct cover\u003c\/li\u003e\n\u003cli\u003e1 m exhaust hose (2 in, with connector)\u003c\/li\u003e\n\u003cli\u003e3 m exhaust hose (2 in, with connector and 2 in to 5.62 in window adapter)\u003c\/li\u003e\n\u003cli\u003eWall mount kit (2 brackets, 4 screws, hex key)\u003c\/li\u003e\n\u003cli\u003eQuick start guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official eufyMake reseller based in Cantabria, Spain, shipping across Spain and the EU. EU warranty and support included. Built for the \u003ca href=\"\/en-dk\/products\/eufymake-e1-3d-texture-uv-printer\"\u003eeufyMake E1 3D-Texture UV Printer\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"eufyMake","offers":[{"title":"Default Title","offer_id":55457777910087,"sku":"EFM-EXHFAN-ACC","price":1576.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/eufymake-exhaust-fan-kit-with-duct-and-hose.png?v=1792253204","url":"https:\/\/eolasprints.com\/en-dk\/products\/eufymake-exhaust-fan-kit","provider":"Eolas Prints","version":"1.0","type":"link"}