{"title":"PLA","description":"\u003cp\u003ePLA is the most widely used 3D printing material — and for good reason. It is the easiest filament to print, needs no enclosure, barely warps, and produces crisp, clean results. Eolas Prints manufactures PLA in Cantabria, Spain, to ISO and REACH standards, with food-safe, toy-safe, and skin-safe certified raw material across the applicable variants. Every spool is tested for dimensional consistency to ±0.05 mm before it leaves our facility.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing a PLA\u003c\/h2\u003e\n\u003cp\u003eOur PLA range covers far more than the standard grade:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard PLA\u003c\/strong\u003e — the everyday workhorse, available in 20+ colours. The right starting point for prototypes, models, and decorative parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Speed PLA\u003c\/strong\u003e — formulated for printing up to 300 mm\/s, with nearly double the strength of standard PLA and ABS-level impact resistance. Built for print farms and fast production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePLA Matte\u003c\/strong\u003e — a smooth, non-reflective finish that hides layer lines for clean display models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePLA Silk\u003c\/strong\u003e — a high-gloss metallic finish in gold, silver, bronze, and copper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePLA Neon\u003c\/strong\u003e — intense fluorescent colours for high-visibility and decorative prints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePLA Transition\u003c\/strong\u003e — a unique gradient effect, made productively from our colour-change material so no two spools are alike.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePLA Ingeo 850 \u0026amp; 870\u003c\/strong\u003e — heat-resistant grades reaching 85°C+ after annealing, an alternative to ABS with PLA ease of printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePLA Antibacterial\u003c\/strong\u003e — ISO-certified, over 99.9% more hygienic than standard PLA, for frequently handled parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eGetting the Best From PLA\u003c\/h2\u003e\n\u003cp\u003ePLA is forgiving, but a little calibration goes a long way. If you are just starting out, our \u003ca href=\"\/en-dk\/blogs\/advanced-3d-printing\/pla-print-settings-first-print-guide\"\u003ePLA settings and first-print guide\u003c\/a\u003e walks you through everything from bed levelling to reading your first layer. For dialling in a fresh spool, see the \u003ca href=\"\/en-dk\/blogs\/advanced-3d-printing\/3d-print-temperature-tower\"\u003etemperature tower\u003c\/a\u003e guide, and our complete \u003ca href=\"\/en-dk\/blogs\/advanced-3d-printing\/3d-printing-troubleshooting-calibration-hub\"\u003etroubleshooting and calibration hub\u003c\/a\u003e covers every common print issue in one place.\u003c\/p\u003e\n\n\u003ch2\u003eMade in Spain\u003c\/h2\u003e\n\u003cp\u003eManufacturing in Cantabria means shorter supply chains, faster restocking, and direct quality control. All PLA ships from Spain with next-day delivery available to mainland Spain and 2–5 day delivery across Europe. Bulk and industrial quantities are available — \u003ca href=\"\/en-dk\/pages\/contact\"\u003econtact us\u003c\/a\u003e for volume pricing.\u003c\/p\u003e","products":[{"product_id":"pla-ingeo-850-filament","title":"PLA Ingeo 850 Filament","description":"\u003cp\u003eEolas Prints PLA Ingeo 850 is a high-impact PLA filament based on NatureWorks Ingeo 850 resin. It prints as easily as standard PLA but delivers significantly better mechanical performance — and after a simple annealing process, it reaches a heat deflection temperature of 85°C, making it a practical alternative to ABS for heat-resistant applications.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (annealed)\u003c\/td\u003e\n\u003ctd\u003e85°C (after 15–20 min at 120°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (unannealed)\u003c\/td\u003e\n\u003ctd\u003e~55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact resistance (annealed)\u003c\/td\u003e\n\u003ctd\u003e~15% greater than standard PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage (annealing)\u003c\/td\u003e\n\u003ctd\u003e~1–2% — design accordingly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood-contact-safe raw material\u003c\/td\u003e\n\u003ctd\u003eYes — virgin pellets and masterbatches certified to EU food-contact standards (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase resin\u003c\/td\u003e\n\u003ctd\u003eNatureWorks Ingeo 3D850\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Note on Food Contact\u003c\/h2\u003e\n\u003cp\u003eOur food-contact certification applies to the \u003cstrong\u003eraw filament material\u003c\/strong\u003e — the virgin pellets and masterbatches we manufacture from — not to finished printed parts. 3D-printed surfaces contain microscopic gaps between layers that can harbour bacteria, and most printers use brass nozzles that may introduce trace metals into the print. For this reason, no 3D-printed object can be guaranteed food-safe by the filament alone. If you intend a part for food contact, print it with a stainless-steel nozzle and apply a food-safe sealant — and assess suitability for your specific use. This remains the responsibility of the maker.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–80 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAnnealing Process\u003c\/h2\u003e\n\u003cp\u003ePlace finished prints on a flat surface in an oven at 120°C for 15–20 minutes. This controlled crystallisation raises the heat deflection temperature to 85°C and increases impact resilience by ~15%. Allow to cool slowly inside the oven — rapid cooling can re-introduce stress. Parts shrink approximately 1–2% during annealing; compensate by designing slightly oversized.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFunctional prototypes requiring heat resistance\u003c\/li\u003e\n\u003cli\u003eEnd-use parts exposed to elevated temperatures\u003c\/li\u003e\n\u003cli\u003eMechanical components and fixtures\u003c\/li\u003e\n\u003cli\u003eConsumer products requiring both strength and precision\u003c\/li\u003e\n\u003cli\u003eHeat-resistant parts that can withstand elevated service temperatures after annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003eManufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm and 2.85mm in Black, White, and Grey.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Datasheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/downloads.eolasprints.com\/flip-book\/c7620d54b7.html\" title=\"PLA Ingeo 850 filament technical datasheet\" target=\"_blank\" aria-label=\"PLA Ingeo 850 filament technical datasheet\"\u003eDownload\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eSafety Datasheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/downloads.eolasprints.com\/flip-book\/4693d333cb.html\" title=\"PLA Ingeo 850 filament safety datasheet\" target=\"_blank\" aria-label=\"PLA Ingeo 850 filament safety datasheet\"\u003eDownload\u003c\/a\u003e\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ White","offer_id":42257256710403,"sku":"PLA-850-1.75M-WHT-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Black","offer_id":42257256677635,"sku":"PLA-850-1.75M-BLK-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Grey","offer_id":42257256743171,"sku":"PLA-850-1.75M-GRY-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ White","offer_id":42257256808707,"sku":"PLA-850-2.85M-WHT-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Black","offer_id":42257256775939,"sku":"PLA-850-2.85M-BLK-1KG","price":25.5,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 1 Kg \/ Grey","offer_id":42257256841475,"sku":"PLA-850-2.85M-GRY-1KG","price":25.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-ingeo-850-filament-black-teardrop-shaped-object-1-75-mm-1-kg-155.webp?v=1725009670"},{"product_id":"pla-ingeo-870-filament","title":"PLA Ingeo 870 Filament","description":"\u003cp\u003eEolas Prints PLA Ingeo 870 is a high-performance, high-impact PLA filament engineered for demanding applications. Based on NatureWorks Ingeo 870 resin, it combines the ease of printing of standard PLA with thermal resistance that rivals ABS — reaching over 85°C after a simple annealing process.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (annealed)\u003c\/td\u003e\n\u003ctd\u003e85°C+ (after 15–20 min at 120°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (unannealed)\u003c\/td\u003e\n\u003ctd\u003e~55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact resistance\u003c\/td\u003e\n\u003ctd\u003eHigh — significantly tougher than standard PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage (annealing)\u003c\/td\u003e\n\u003ctd\u003e~1–2% — design accordingly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage (printing)\u003c\/td\u003e\n\u003ctd\u003eLow — excellent dimensional stability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase resin\u003c\/td\u003e\n\u003ctd\u003eNatureWorks Ingeo 3D870\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEco-friendly\u003c\/td\u003e\n\u003ctd\u003eDerived from renewable resources (corn starch \/ sugarcane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–80 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAnnealing Process\u003c\/h2\u003e\n\u003cp\u003ePlace finished prints on a flat surface in an oven at 120°C for 15–20 minutes. This controlled crystallisation raises the heat deflection temperature to over 85°C and increases impact resilience by approximately 15% compared to standard PLA. Allow to cool slowly inside the oven. Parts shrink approximately 1–2% during annealing — compensate by designing slightly oversized.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFunctional prototypes requiring heat resistance\u003c\/li\u003e\n\u003cli\u003eEnd-use parts exposed to elevated temperatures\u003c\/li\u003e\n\u003cli\u003eMechanical components and fixtures\u003c\/li\u003e\n\u003cli\u003eAutomotive interior parts\u003c\/li\u003e\n\u003cli\u003eConsumer products requiring durability and precision\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003eManufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm and 2.85mm in Black, White, and Grey.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Datasheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/downloads.eolasprints.com\/flip-book\/c7620d54b7.html\" title=\"PLA Ingeo 870 technical datasheet\" target=\"_blank\" aria-label=\"PLA Ingeo 870 technical datasheet\"\u003eDownload\u003c\/a\u003e\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Grey","offer_id":42257267130627,"sku":"PLA-870-1.75M-GRY-1KG","price":30.5,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 1 Kg \/ Black","offer_id":42257267065091,"sku":"PLA-870-1.75M-BLK-1KG","price":30.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ White","offer_id":42257267097859,"sku":"PLA-870-1.75M-WHT-1KG","price":30.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Grey","offer_id":42257267228931,"sku":"PLA-870-2.85M-GRY-1KG","price":30.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Black","offer_id":42257267163395,"sku":"PLA-870-2.85M-BLK-1KG","price":30.5,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 1 Kg \/ White","offer_id":42257267196163,"sku":"PLA-870-2.85M-WHT-1KG","price":30.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-ingeo-870-filament-football-helmet-made-1-75-mm-1-kg-grey-345.webp?v=1725009953"},{"product_id":"pla-filament-1-75-mm","title":"PLA Filament 1.75 mm","description":"\u003cp\u003eEolas Prints PLA 1.75mm is our flagship filament — manufactured in Cantabria, Spain, from NatureWorks Ingeo PLA resin. Available in over 20 colours including standard, silk, matte, neon, and transition variants, it delivers consistent, reliable results across the full range of FDM printers. Made from food-contact-safe, toy-safe, and skin-safe certified raw material.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e50–60 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage\u003c\/td\u003e\n\u003ctd\u003eMinimal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood-contact-safe raw material\u003c\/td\u003e\n\u003ctd\u003eYes — virgin pellets and masterbatches certified to EU food-contact standards (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEco-friendly\u003c\/td\u003e\n\u003ctd\u003eDerived from renewable resources (corn starch \/ sugarcane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Note on Food Contact\u003c\/h2\u003e\n\u003cp\u003eOur food-contact certification applies to the \u003cstrong\u003eraw filament material\u003c\/strong\u003e — the virgin pellets and masterbatches we manufacture from — not to finished printed parts. 3D-printed surfaces contain microscopic gaps between layers that can harbour bacteria, and most printers use brass nozzles that may introduce trace metals into the print. For this reason, no 3D-printed object can be guaranteed food-safe by the filament alone. If you intend a part for food contact, print it with a stainless-steel nozzle and apply a food-safe sealant — and assess suitability for your specific use. This remains the responsibility of the maker.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed (standard)\u003c\/td\u003e\n\u003ctd\u003e40–100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed (High Speed PLA)\u003c\/td\u003e\n\u003ctd\u003eUp to 300 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePLA Variants\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard PLA\u003c\/strong\u003e — 20+ colours, ideal for prototypes, models, and everyday parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-high-speed-filament\" title=\"High Speed PLA\" aria-label=\"High Speed PLA\"\u003eHigh Speed PLA\u003c\/a\u003e\u003c\/strong\u003e — up to 300mm\/s, near-double strength of standard PLA, ABS-level impact resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-matte-filament\" title=\"PLA Matte\" aria-label=\"PLA Matte\"\u003ePLA Matte\u003c\/a\u003e\u003c\/strong\u003e — non-reflective finish that minimises visible layer lines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-silk-filament\" title=\"PLA Silk\" aria-label=\"PLA Silk\"\u003ePLA Silk\u003c\/a\u003e\u003c\/strong\u003e — high-gloss metallic finish in gold, silver, bronze, and copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-neon-filament\" title=\"PLA Neon\" aria-label=\"PLA Neon\"\u003ePLA Neon\u003c\/a\u003e\u003c\/strong\u003e — intense fluorescent colours: green, yellow, orange, and pink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-transition-filament\" title=\"PLA Transition\" aria-label=\"PLA Transition\"\u003ePLA Transition\u003c\/a\u003e\u003c\/strong\u003e — unique gradient effect from virgin colour-transition material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-ingeo-850-filament\" title=\"PLA Ingeo 850\" aria-label=\"PLA Ingeo 850\"\u003ePLA Ingeo 850\u003c\/a\u003e\u003c\/strong\u003e — reaches 85°C after annealing, heat-resistant alternative to ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-antibacterial-filament\" title=\"PLA Antibacterial\" aria-label=\"PLA Antibacterial\"\u003ePLA Antibacterial\u003c\/a\u003e\u003c\/strong\u003e — ISO certified 99.9% more hygienic than standard PLA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrototypes, models, and decorative objects\u003c\/li\u003e\n\u003cli\u003eContainers and kitchen accessories (with appropriate food-safe sealing — see note above)\u003c\/li\u003e\n\u003cli\u003eChildren's toys and educational models\u003c\/li\u003e\n\u003cli\u003eWearable components and skin-contact parts\u003c\/li\u003e\n\u003cli\u003eArchitectural and product design models\u003c\/li\u003e\n\u003cli\u003eHigh-volume print farm production\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Datasheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/downloads.eolasprints.com\/flip-book\/c7620d54b7.html\" title=\"PLA filament technical datasheet\" target=\"_blank\" aria-label=\"PLA filament technical datasheet\"\u003eDownload\u003c\/a\u003e\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Pink","offer_id":42329912279299,"sku":"PLA-PRM-1.75M-PNK-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Grey","offer_id":42329912934659,"sku":"PLA-PRM-1.75M-GRY-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Natural","offer_id":42329914114307,"sku":"PLA-PRM-1.75M-NTR-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Black","offer_id":42324104413443,"sku":"PLA-PRM-1.75M-BLK-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Blue","offer_id":42324104478979,"sku":"PLA-PRM-1.75M-BLU-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Orange","offer_id":42329911984387,"sku":"PLA-PRM-1.75M-ORG-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Cyan","offer_id":42329912148227,"sku":"PLA-PRM-1.75M-CYN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Mint","offer_id":42329912410371,"sku":"PLA-PRM-1.75M-MNT-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Beige","offer_id":42329912541443,"sku":"PLA-PRM-1.75M-BEG-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ White","offer_id":42329912672515,"sku":"PLA-PRM-1.75M-WHT-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Dark Grey","offer_id":42329912803587,"sku":"PLA-PRM-1.75M-DGR-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Yellow","offer_id":42329913065731,"sku":"PLA-PRM-1.75M-YLW-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Green","offer_id":42329913196803,"sku":"PLA-PRM-1.75M-GRN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Dark Green","offer_id":42329913327875,"sku":"PLA-PRM-1.75M-DGN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Straw","offer_id":42329913458947,"sku":"PLA-PRM-1.75M-STW-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Light Orange","offer_id":42329913590019,"sku":"PLA-PRM-1.75M-LOG-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Turquoise","offer_id":42329913721091,"sku":"PLA-PRM-1.75M-TQS-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Violet","offer_id":42329913852163,"sku":"PLA-PRM-1.75M-VLT-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Baby Blue","offer_id":42329913983235,"sku":"PLA-PRM-1.75M-BBL-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Red","offer_id":42329914245379,"sku":"PLA-PRM-1.75M-RED-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Skin","offer_id":43538704662787,"sku":"PLA-PRM-1.75M-SKN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Brown","offer_id":52769767031111,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Dark Brown","offer_id":52769767063879,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 2.5 Kg \/ Grey","offer_id":42329912967427,"sku":"PLA-PRM-1.75M-GRY-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 2.5 Kg \/ Natural","offer_id":42329914147075,"sku":"PLA-PRM-1.75M-NTR-2.5KG","price":49.75,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 2.5 Kg \/ Black","offer_id":42329911820547,"sku":"PLA-PRM-1.75M-BLK-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 2.5 Kg \/ White","offer_id":42329912705283,"sku":"PLA-PRM-1.75M-WHT-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 5 Kg \/ Grey","offer_id":42329913000195,"sku":"PLA-PRM-1.75M-GRY-5KG","price":117.5,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 5 Kg \/ Natural","offer_id":42329914179843,"sku":"PLA-PRM-1.75M-NTR-5KG","price":117.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 5 Kg \/ Black","offer_id":42329911853315,"sku":"PLA-PRM-1.75M-BLK-5KG","price":117.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 5 Kg \/ White","offer_id":42329912738051,"sku":"PLA-PRM-1.75M-WHT-5KG","price":117.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-filament-1-75-mm-pink-3d-printer-250-g-914.webp?v=1724891823"},{"product_id":"pla-filament-2-85-mm","title":"PLA Filament 2.85 mm","description":"\u003cp\u003eEolas Prints PLA 2.85mm is the ideal choice for printers that require the wider format — including Ultimaker, LulzBot, and many other professional desktop machines. Manufactured in Cantabria, Spain, from NatureWorks Ingeo PLA resin, it delivers the same consistent quality and material certifications as our 1.75mm range. Made from food-contact-safe, toy-safe, and skin-safe certified raw material.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e50–60 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage\u003c\/td\u003e\n\u003ctd\u003eMinimal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood-contact-safe raw material\u003c\/td\u003e\n\u003ctd\u003eYes — virgin pellets and masterbatches certified to EU food-contact standards (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEco-friendly\u003c\/td\u003e\n\u003ctd\u003eDerived from renewable resources (corn starch \/ sugarcane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Note on Food Contact\u003c\/h2\u003e\n\u003cp\u003eOur food-contact certification applies to the \u003cstrong\u003eraw filament material\u003c\/strong\u003e — the virgin pellets and masterbatches we manufacture from — not to finished printed parts. 3D-printed surfaces contain microscopic gaps between layers that can harbour bacteria, and most printers use brass nozzles that may introduce trace metals into the print. For this reason, no 3D-printed object can be guaranteed food-safe by the filament alone. If you intend a part for food contact, print it with a stainless-steel nozzle and apply a food-safe sealant — and assess suitability for your specific use. This remains the responsibility of the maker.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrototypes, models, and decorative objects\u003c\/li\u003e\n\u003cli\u003eContainers and kitchen accessories (with appropriate food-safe sealing — see note above)\u003c\/li\u003e\n\u003cli\u003eChildren's toys and educational models\u003c\/li\u003e\n\u003cli\u003eWearable components and skin-contact parts\u003c\/li\u003e\n\u003cli\u003eArchitectural and product design models\u003c\/li\u003e\n\u003cli\u003eProfessional desktop printing on Ultimaker, LulzBot, and similar machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003eAvailable in over 20 colours in 1 kg spools. ISO 9001 and ISO 14001 certified. Also available in \u003ca href=\"\/en-us\/products\/pla-filament-1-75-mm\" title=\"PLA Filament 1.75mm\" aria-label=\"PLA Filament 1.75mm\"\u003e1.75mm diameter\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Datasheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/downloads.eolasprints.com\/flip-book\/c7620d54b7.html\" title=\"PLA filament technical datasheet\" target=\"_blank\" aria-label=\"PLA filament technical datasheet\"\u003eDownload\u003c\/a\u003e\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"2.85 mm \/ 1 Kg \/ Mint","offer_id":42330061111555,"sku":"PLA-PRM-2.85M-MNT-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Black","offer_id":42324109852931,"sku":"PLA-PRM-2.85M-BLK-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Blue","offer_id":42324109918467,"sku":"PLA-PRM-2.85M-BLU-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Orange","offer_id":42330060816643,"sku":"PLA-PRM-2.85M-ORG-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Cyan","offer_id":42330060914947,"sku":"PLA-PRM-2.85M-CYN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Pink","offer_id":42330061013251,"sku":"PLA-PRM-2.85M-PNK-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Beige","offer_id":42330061209859,"sku":"PLA-PRM-2.85M-BEG-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ White","offer_id":42330061308163,"sku":"PLA-PRM-2.85M-WHT-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Dark Grey","offer_id":42330061406467,"sku":"PLA-PRM-2.85M-DGR-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Grey","offer_id":42330061504771,"sku":"PLA-PRM-2.85M-GRY-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Yellow","offer_id":42330061603075,"sku":"PLA-PRM-2.85M-YLW-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Green","offer_id":42330061701379,"sku":"PLA-PRM-2.85M-GRN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Dark Green","offer_id":42330061799683,"sku":"PLA-PRM-2.85M-DGN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Straw","offer_id":42330061897987,"sku":"PLA-PRM-2.85M-STW-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Light Orange","offer_id":42330061996291,"sku":"PLA-PRM-2.85M-LOG-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Turquoise","offer_id":42330062094595,"sku":"PLA-PRM-2.85M-TQS-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Violet","offer_id":42330062192899,"sku":"PLA-PRM-2.85M-VLT-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Baby Blue","offer_id":42330062291203,"sku":"PLA-PRM-2.85M-BBL-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Natural","offer_id":42330062389507,"sku":"PLA-PRM-2.85M-NTR-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Red","offer_id":42330062487811,"sku":"PLA-PRM-2.85M-RED-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Skin","offer_id":43778687205635,"sku":"PLA-PRM-2.85M-SKN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Black","offer_id":42330042761475,"sku":"PLA-PRM-2.85M-BLK-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Blue","offer_id":42330042827011,"sku":"PLA-PRM-2.85M-BLU-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Orange","offer_id":42330060849411,"sku":"PLA-PRM-2.85M-ORG-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ White","offer_id":42330061340931,"sku":"PLA-PRM-2.85M-WHT-2.5KG","price":49.75,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 2.5 Kg \/ Grey","offer_id":42330061537539,"sku":"PLA-PRM-2.85M-GRY-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Straw","offer_id":42330061930755,"sku":"PLA-PRM-2.85M-STW-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Turquoise","offer_id":42330062127363,"sku":"PLA-PRM-2.85M-TQS-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Violet","offer_id":42330062225667,"sku":"PLA-PRM-2.85M-VLT-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Natural","offer_id":42330062422275,"sku":"PLA-PRM-2.85M-NTR-2.5KG","price":49.75,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 5 Kg \/ Black","offer_id":42330042794243,"sku":"PLA-PRM-2.85M-BLK-5KG","price":117.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 5 Kg \/ White","offer_id":42330061373699,"sku":"PLA-PRM-2.85M-WHT-5KG","price":117.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 5 Kg \/ Dark Grey","offer_id":42330061472003,"sku":"PLA-PRM-2.85M-DGR-5KG","price":117.5,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 5 Kg \/ Grey","offer_id":42330061570307,"sku":"PLA-PRM-2.85M-GRY-5KG","price":117.5,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 5 Kg \/ Natural","offer_id":42330062455043,"sku":"PLA-PRM-2.85M-NTR-5KG","price":117.5,"currency_code":"EUR","in_stock":false},{"title":"2,85 mm \/ 5 kg \/ Yellow","offer_id":53759776850247,"sku":null,"price":117.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-filament-2-85-mm-turquoise-3d-printer-1-kg-668.webp?v=1725568869"},{"product_id":"pla-transition-filament","title":"PLA Transition Filament","description":"\u003cp\u003eEolas Prints PLA Transition filament is made from the virgin colour-blend produced during our manufacturing process. As one colour changes over to another, a natural gradient of the two is created — rather than purging it, we spool it, producing a filament with a gradient effect that makes every print unique. Productive use of every metre, one-of-a-kind results.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour effect\u003c\/td\u003e\n\u003ctd\u003eNatural gradient — unique on every print\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage\u003c\/td\u003e\n\u003ctd\u003eMinimal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood-contact-safe raw material\u003c\/td\u003e\n\u003ctd\u003eYes — virgin pellets and masterbatches certified to EU food-contact standards (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Note on Food Contact\u003c\/h2\u003e\n\u003cp\u003eOur food-contact certification applies to the \u003cstrong\u003eraw filament material\u003c\/strong\u003e — the virgin pellets and masterbatches we manufacture from — not to finished printed parts. 3D-printed surfaces contain microscopic gaps between layers that can harbour bacteria, and most printers use brass nozzles that may introduce trace metals into the print. For this reason, no 3D-printed object can be guaranteed food-safe by the filament alone. If you intend a part for food contact, print it with a stainless-steel nozzle and apply a food-safe sealant — and assess suitability for your specific use. This remains the responsibility of the maker.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy Transition Filament?\u003c\/h2\u003e\n\u003cp\u003eTransition filament is the virgin material produced during the colour-change phase of manufacturing. As one colour gives way to the next, the two blend naturally. Instead of purging this material, we spool it into a filament that produces gradient colour effects in every print — making productive use of every metre and delivering a visually unique product with a gradient that no two spools share.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArtistic and decorative prints where unique appearance is valued\u003c\/li\u003e\n\u003cli\u003eDisplay models and prototypes\u003c\/li\u003e\n\u003cli\u003eConsumer products, gifts, and personalised items\u003c\/li\u003e\n\u003cli\u003eEducational projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003eManufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm and 2.85mm.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Transition","offer_id":42324485439747,"sku":"PLA-TRN-1.75M-1KG","price":13.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Transition","offer_id":42324485505283,"sku":"PLA-TRN-2.85M-1KG","price":13.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-transition-filament-pair-3d-printed-boots-1-75-mm-1-kg-960.webp?v=1725277266"},{"product_id":"pla-matte-filament","title":"PLA Matte Filament","description":"\u003cp\u003eEolas Prints PLA Matte filament delivers a smooth, non-reflective finish that significantly reduces the appearance of layer lines on printed parts. Prints come off the bed looking clean and professional without any post-processing — ideal for display models, architectural models, and anything where surface quality matters more than gloss.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eMatte — non-reflective, minimal visible layer lines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage\u003c\/td\u003e\n\u003ctd\u003eMinimal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay models and presentation prototypes\u003c\/li\u003e\n\u003cli\u003eArtistic and decorative prints\u003c\/li\u003e\n\u003cli\u003eConsumer product housings and enclosures\u003c\/li\u003e\n\u003cli\u003eArchitectural models\u003c\/li\u003e\n\u003cli\u003eEducational models and classroom projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003ePLA Matte is manufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm in multiple colours.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Red","offer_id":42726060261635,"sku":"PLA-PRM-1.75M-RED-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Black","offer_id":42726057902339,"sku":"PLA-PRM-1.75M-BLK-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Blue","offer_id":42726058033411,"sku":"PLA-PRM-1.75M-BLU-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ White","offer_id":42726058688771,"sku":"PLA-PRM-1.75M-WHT-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Yellow","offer_id":42726059081987,"sku":"PLA-PRM-1.75M-YLW-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Red","offer_id":42758638928131,"sku":"PLA-PRM-2.85M-RED-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Black","offer_id":42758638469379,"sku":"PLA-PRM-2.85M-BLK-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Blue","offer_id":42758638567683,"sku":"PLA-PRM-2.85M-BLU-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ White","offer_id":42758638665987,"sku":"PLA-PRM-2.85M-WHT-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Yellow","offer_id":42758638764291,"sku":"PLA-PRM-2.85M-YLW-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-matte-filament-blue-vase-diamond-patterned-1-75-mm-1-kg-882.webp?v=1724968453"},{"product_id":"sample-3d-printer-filaments","title":"Sample 3D Printer Filaments","description":"\u003cp\u003eNot sure which Eolas Prints filament is right for your printer or project? This sample pack lets you test our three core materials before committing to a full spool — saving time, money, and wasted plastic.\u003c\/p\u003e\u003cp\u003eEach pack contains 50g samples of PLA, PETG, and TPU — all manufactured by Eolas Prints in Spain. Available in 1.75mm and 2.85mm diameters.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 × 50g PLA — easy to print, food safe, ideal for everyday parts\u003c\/li\u003e\n\u003cli\u003e1 × 50g PETG — stronger than PLA, chemical resistant, food safe\u003c\/li\u003e\n\u003cli\u003e1 × 50g TPU (93A) — flexible, food safe, ideal for grips and cases\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy sample first?\u003c\/h2\u003e\u003cp\u003eEvery 3D printer behaves slightly differently. Testing a small amount of each material lets you dial in temperature, speed, and retraction settings before purchasing a full kilogram spool. Our samples are identical in quality and formulation to our retail filaments — no downgraded batches.\u003c\/p\u003e\u003cp\u003eAll materials are food contact safe, toy safe, and skin contact safe. Includes carbon-neutral shipping.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm","offer_id":42792860778755,"sku":"SAM-1.75MM-MUL-150G","price":4.99,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm","offer_id":42792860811523,"sku":"SAM-2.85MM-MUL-150G","price":4.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/sample-3d-printer-filaments-four-colorful-elastic-259.webp?v=1727815219"},{"product_id":"pla-silk-filament","title":"PLA Silk Filament","description":"\u003cp\u003eEolas Prints PLA Silk filament produces a stunning high-gloss metallic finish that hides layer lines and gives prints a polished, professional appearance straight off the bed — no post-processing required. Available in gold, silver, bronze, and copper, it is ideal for decorative objects, display models, jewellery, and anything where appearance matters as much as function.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHigh-gloss silk-like metallic — gold, silver, bronze, copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood-contact-safe raw material\u003c\/td\u003e\n\u003ctd\u003eYes — virgin pellets and masterbatches certified to EU food-contact standards (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable diameters\u003c\/td\u003e\n\u003ctd\u003e1.75mm and 2.85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Note on Food Contact\u003c\/h2\u003e\n\u003cp\u003eOur food-contact certification applies to the \u003cstrong\u003eraw filament material\u003c\/strong\u003e — the virgin pellets and masterbatches we manufacture from — not to finished printed parts. 3D-printed surfaces contain microscopic gaps between layers that can harbour bacteria, and most printers use brass nozzles that may introduce trace metals into the print. For this reason, no 3D-printed object can be guaranteed food-safe by the filament alone. If you intend a part for food contact, print it with a stainless-steel nozzle and apply a food-safe sealant — and assess suitability for your specific use. This remains the responsibility of the maker.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e200–230°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–60 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003eModerate — avoid maximum fan speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDecorative objects, figurines, and display models\u003c\/li\u003e\n\u003cli\u003eJewellery, awards, and trophies\u003c\/li\u003e\n\u003cli\u003eArchitectural and product design models\u003c\/li\u003e\n\u003cli\u003eGifts and personalised items\u003c\/li\u003e\n\u003cli\u003eCosplay props and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003ePLA Silk is manufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm and 2.85mm in gold, silver, bronze, and copper.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Gold","offer_id":48637851533639,"sku":"PLA-SLK-1.75M-GLD-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Silver","offer_id":48637851566407,"sku":"PLA-SLK-1.75M-SLV-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Bronze","offer_id":48637851599175,"sku":"PLA-SLK-1.75M-BRZ-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Copper","offer_id":48637851631943,"sku":"PLA-SLK-1.75M-COP-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Gold","offer_id":48637851664711,"sku":"PLA-SLK-2.8M-GLD-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Silver","offer_id":48637851697479,"sku":"PLA-SLK-2.8M-SLV-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Bronze","offer_id":48637851730247,"sku":"PLA-SLK-2.8M-BRZ-1KG","price":25.5,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 1 Kg \/ Copper","offer_id":48637851763015,"sku":"PLA-SLK-2.8M-COP-1KG","price":25.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-silk-filament-spool-yellow-3d-1-75-mm-1-kg-gold-681.webp?v=1725008768"},{"product_id":"pla-high-speed-filament","title":"High Speed PLA Filament","description":"\u003cp\u003eEolas Prints High Speed PLA is specifically formulated for rapid 3D printing at speeds up to 300mm\/s — without compromising surface quality or dimensional accuracy. Its enhanced polymer matrix delivers nearly double the strength of standard PLA, with impact resistance comparable to ABS, making it the right choice for high-volume production and functional parts that need to print fast.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e~2× standard PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact resistance\u003c\/td\u003e\n\u003ctd\u003eABS-level\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood-contact-safe raw material\u003c\/td\u003e\n\u003ctd\u003eYes — virgin pellets and masterbatches certified to EU food-contact standards (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-annealing compatible\u003c\/td\u003e\n\u003ctd\u003eYes — improves thermal properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Note on Food Contact\u003c\/h2\u003e\n\u003cp\u003eOur food-contact certification applies to the \u003cstrong\u003eraw filament material\u003c\/strong\u003e — the virgin pellets and masterbatches we manufacture from — not to finished printed parts. 3D-printed surfaces contain microscopic gaps between layers that can harbour bacteria, and most printers use brass nozzles that may introduce trace metals into the print. For this reason, no 3D-printed object can be guaranteed food-safe by the filament alone. If you intend a part for food contact, print it with a stainless-steel nozzle and apply a food-safe sealant — and assess suitability for your specific use. This remains the responsibility of the maker.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e200–240°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e100–300 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-volume print farms requiring fast throughput\u003c\/li\u003e\n\u003cli\u003eIndustrial design and rapid prototyping\u003c\/li\u003e\n\u003cli\u003eFunctional parts requiring speed and mechanical strength\u003c\/li\u003e\n\u003cli\u003ePrecision engineering components\u003c\/li\u003e\n\u003cli\u003eProduction environments with Bambu Lab, CoreXY, and other high-speed capable machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003eHigh Speed PLA is manufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm in 5 colours: Blue, Red, Black, White, and Grey.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Blue","offer_id":48980628341063,"sku":"PLA-HSD-1.75M-BLU-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Red","offer_id":48980628275527,"sku":"PLA-HSD-1.75M-RED-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Black","offer_id":48980628308295,"sku":"PLA-HSD-1.75M-BLK-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ White","offer_id":48980628373831,"sku":"PLA-HSD-1.75M-WHT-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Grey","offer_id":48980628406599,"sku":"PLA-HSD-1.75M-GRY-1KG","price":25.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/high-speed-pla-filament-spool-blue-3d-1-75-mm-1-kg-736.webp?v=1725010009"},{"product_id":"pla-antibacterial-filament","title":"PLA Antibacterial Filament","description":"\u003cp\u003eEolas Prints PLA Antibacterial filament integrates ISO-certified Biomaster antimicrobial technology directly into the PLA matrix, providing continuous surface protection against harmful bacteria for the lifetime of the printed part. Certified over 99.9% more hygienic than conventional PLA, it delivers a professional matte finish alongside its protective properties.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntimicrobial certification\u003c\/td\u003e\n\u003ctd\u003eISO certified — 99.9%+ more hygienic than standard PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eBiomaster silver-ion antimicrobial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood-contact-safe raw material\u003c\/td\u003e\n\u003ctd\u003eYes — virgin pellets and masterbatches certified to EU food-contact standards (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Note on Food Contact\u003c\/h2\u003e\n\u003cp\u003eOur food-contact certification applies to the \u003cstrong\u003eraw filament material\u003c\/strong\u003e — the virgin pellets and masterbatches we manufacture from — not to finished printed parts. 3D-printed surfaces contain microscopic gaps between layers that can harbour bacteria, and most printers use brass nozzles that may introduce trace metals into the print. For this reason, no 3D-printed object can be guaranteed food-safe by the filament alone. If you intend a part for food contact, print it with a stainless-steel nozzle and apply a food-safe sealant — and assess suitability for your specific use. This remains the responsibility of the maker.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrequently handled items — door handles, switches, grab rails\u003c\/li\u003e\n\u003cli\u003eHealthcare and medical environment components\u003c\/li\u003e\n\u003cli\u003eKitchen accessories and food-preparation aids (with appropriate food-safe sealing — see note above)\u003c\/li\u003e\n\u003cli\u003eChildren's toys and educational models\u003c\/li\u003e\n\u003cli\u003ePublic-facing fixtures in hospitality and retail\u003c\/li\u003e\n\u003cli\u003eFunctional prototypes where hygiene certification is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003eManufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm in Black and White.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Black","offer_id":49817967067463,"sku":"PLA-ABL-1.75M-BLK-1KG","price":30.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ White","offer_id":49817967132999,"sku":"PLA-ABL-1.75M-WHT-1KG","price":30.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-antibacterial-filament-white-3d-printer-1-75-mm-1-kg-463.webp?v=1734741747"},{"product_id":"pla-neon-filament","title":"PLA Neon Filament","description":"\u003cp\u003eEolas Prints PLA Neon filament delivers intensely vibrant, fluorescent colours that make prints stand out immediately. The neon pigment formulation minimises layer lines and enhances surface smoothness, so your prints look as striking as possible with no post-processing. Available in neon green, yellow, orange, and pink.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eNeon green, yellow, orange, pink\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eFluorescent — minimal visible layer lines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood contact safe\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSports equipment, safety gear, and high-visibility parts\u003c\/li\u003e\n\u003cli\u003eChildren's toys, games, and educational models\u003c\/li\u003e\n\u003cli\u003eArtistic and decorative prints\u003c\/li\u003e\n\u003cli\u003eTrade show displays and attention-grabbing prototypes\u003c\/li\u003e\n\u003cli\u003eCosplay props and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003ePLA Neon is manufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm, 1 kg spools.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Green","offer_id":51546064585031,"sku":"PLA-NEO-1.75M-GRN-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Yellow","offer_id":51546064519495,"sku":"PLA-NEO-1.75M-YLW-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Orange","offer_id":51546064552263,"sku":"PLA-NEO-1.75M-ORG-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Pink","offer_id":52748929728839,"sku":"PLA-NEO-1.75M-PNK-1KG","price":25.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-neon-filament-bright-green-1-75-mm-1-kg-902.webp?v=1759189958"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/collections\/pla-pink-3d-printer.webp?v=1729353669","url":"https:\/\/eolasprints.com\/en-dk\/collections\/pla\/antibacterial.oembed","provider":"Eolas Prints","version":"1.0","type":"link"}