{"title":"Decorative \u0026 Display Filament","description":"\u003cp\u003eDecorative and display 3D printing filament is all about how the finished print looks. These materials are chosen for finish, colour and visual character — silk filaments with a glossy sheen, matte filaments that hide layer lines for a premium surface, wood-fill that looks and feels like timber, and bright neon shades for eye-catching pieces.\u003c\/p\u003e\u003cp\u003eThis is the range for display models, home décor, ornaments, cosplay accents, vases, gifts, signage and any print where appearance is the point. Matte PLA in particular is prized for photography and presentation models because its non-reflective surface reads cleanly and disguises the layer texture, while silk gives a rich, almost metallic lustre straight off the printer with no finishing required.\u003c\/p\u003e\u003cp\u003eAll decorative filaments are manufactured in Spain by Eolas Prints under ISO 9001 and ISO 14001 standards, with consistent diameter for reliable, attractive prints. Most are based on easy-printing PLA, so you get standout looks without difficult settings — ideal for makers who care how the final piece presents.\u003c\/p\u003e","products":[{"product_id":"pla-ingeo-850-filament","title":"PLA Ingeo 850 Filament","description":"\u003cp\u003eEolas Prints PLA Ingeo 850 is a high-impact PLA filament based on NatureWorks Ingeo 850 resin. It prints as easily as standard PLA but delivers significantly better mechanical performance — and after a simple annealing process, it reaches a heat deflection temperature of 85°C, making it a practical alternative to ABS for heat-resistant applications.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (annealed)\u003c\/td\u003e\n\u003ctd\u003e85°C (after 15–20 min at 120°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (unannealed)\u003c\/td\u003e\n\u003ctd\u003e~55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact resistance (annealed)\u003c\/td\u003e\n\u003ctd\u003e~15% greater than standard PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage (annealing)\u003c\/td\u003e\n\u003ctd\u003e~1–2% — design accordingly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood-contact-safe raw material\u003c\/td\u003e\n\u003ctd\u003eYes — virgin pellets and masterbatches certified to EU food-contact standards (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase resin\u003c\/td\u003e\n\u003ctd\u003eNatureWorks Ingeo 3D850\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Note on Food Contact\u003c\/h2\u003e\n\u003cp\u003eOur food-contact certification applies to the \u003cstrong\u003eraw filament material\u003c\/strong\u003e — the virgin pellets and masterbatches we manufacture from — not to finished printed parts. 3D-printed surfaces contain microscopic gaps between layers that can harbour bacteria, and most printers use brass nozzles that may introduce trace metals into the print. For this reason, no 3D-printed object can be guaranteed food-safe by the filament alone. If you intend a part for food contact, print it with a stainless-steel nozzle and apply a food-safe sealant — and assess suitability for your specific use. This remains the responsibility of the maker.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–80 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAnnealing Process\u003c\/h2\u003e\n\u003cp\u003ePlace finished prints on a flat surface in an oven at 120°C for 15–20 minutes. This controlled crystallisation raises the heat deflection temperature to 85°C and increases impact resilience by ~15%. Allow to cool slowly inside the oven — rapid cooling can re-introduce stress. Parts shrink approximately 1–2% during annealing; compensate by designing slightly oversized.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFunctional prototypes requiring heat resistance\u003c\/li\u003e\n\u003cli\u003eEnd-use parts exposed to elevated temperatures\u003c\/li\u003e\n\u003cli\u003eMechanical components and fixtures\u003c\/li\u003e\n\u003cli\u003eConsumer products requiring both strength and precision\u003c\/li\u003e\n\u003cli\u003eHeat-resistant parts that can withstand elevated service temperatures after annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003eManufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm and 2.85mm in Black, White, and Grey.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Datasheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/downloads.eolasprints.com\/flip-book\/c7620d54b7.html\" title=\"PLA Ingeo 850 filament technical datasheet\" target=\"_blank\" aria-label=\"PLA Ingeo 850 filament technical datasheet\"\u003eDownload\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eSafety Datasheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/downloads.eolasprints.com\/flip-book\/4693d333cb.html\" title=\"PLA Ingeo 850 filament safety datasheet\" target=\"_blank\" aria-label=\"PLA Ingeo 850 filament safety datasheet\"\u003eDownload\u003c\/a\u003e\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ White","offer_id":42257256710403,"sku":"PLA-850-1.75M-WHT-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Black","offer_id":42257256677635,"sku":"PLA-850-1.75M-BLK-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Grey","offer_id":42257256743171,"sku":"PLA-850-1.75M-GRY-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ White","offer_id":42257256808707,"sku":"PLA-850-2.85M-WHT-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Black","offer_id":42257256775939,"sku":"PLA-850-2.85M-BLK-1KG","price":25.5,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 1 Kg \/ Grey","offer_id":42257256841475,"sku":"PLA-850-2.85M-GRY-1KG","price":25.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-ingeo-850-filament-black-teardrop-shaped-object-1-75-mm-1-kg-155.webp?v=1725009670"},{"product_id":"pla-ingeo-870-filament","title":"PLA Ingeo 870 Filament","description":"\u003cp\u003eEolas Prints PLA Ingeo 870 is a high-performance, high-impact PLA filament engineered for demanding applications. Based on NatureWorks Ingeo 870 resin, it combines the ease of printing of standard PLA with thermal resistance that rivals ABS — reaching over 85°C after a simple annealing process.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (annealed)\u003c\/td\u003e\n\u003ctd\u003e85°C+ (after 15–20 min at 120°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature (unannealed)\u003c\/td\u003e\n\u003ctd\u003e~55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact resistance\u003c\/td\u003e\n\u003ctd\u003eHigh — significantly tougher than standard PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage (annealing)\u003c\/td\u003e\n\u003ctd\u003e~1–2% — design accordingly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage (printing)\u003c\/td\u003e\n\u003ctd\u003eLow — excellent dimensional stability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase resin\u003c\/td\u003e\n\u003ctd\u003eNatureWorks Ingeo 3D870\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEco-friendly\u003c\/td\u003e\n\u003ctd\u003eDerived from renewable resources (corn starch \/ sugarcane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–80 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAnnealing Process\u003c\/h2\u003e\n\u003cp\u003ePlace finished prints on a flat surface in an oven at 120°C for 15–20 minutes. This controlled crystallisation raises the heat deflection temperature to over 85°C and increases impact resilience by approximately 15% compared to standard PLA. Allow to cool slowly inside the oven. Parts shrink approximately 1–2% during annealing — compensate by designing slightly oversized.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFunctional prototypes requiring heat resistance\u003c\/li\u003e\n\u003cli\u003eEnd-use parts exposed to elevated temperatures\u003c\/li\u003e\n\u003cli\u003eMechanical components and fixtures\u003c\/li\u003e\n\u003cli\u003eAutomotive interior parts\u003c\/li\u003e\n\u003cli\u003eConsumer products requiring durability and precision\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003eManufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm and 2.85mm in Black, White, and Grey.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Datasheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/downloads.eolasprints.com\/flip-book\/c7620d54b7.html\" title=\"PLA Ingeo 870 technical datasheet\" target=\"_blank\" aria-label=\"PLA Ingeo 870 technical datasheet\"\u003eDownload\u003c\/a\u003e\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Grey","offer_id":42257267130627,"sku":"PLA-870-1.75M-GRY-1KG","price":30.5,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 1 Kg \/ Black","offer_id":42257267065091,"sku":"PLA-870-1.75M-BLK-1KG","price":30.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ White","offer_id":42257267097859,"sku":"PLA-870-1.75M-WHT-1KG","price":30.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Grey","offer_id":42257267228931,"sku":"PLA-870-2.85M-GRY-1KG","price":30.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Black","offer_id":42257267163395,"sku":"PLA-870-2.85M-BLK-1KG","price":30.5,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 1 Kg \/ White","offer_id":42257267196163,"sku":"PLA-870-2.85M-WHT-1KG","price":30.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-ingeo-870-filament-football-helmet-made-1-75-mm-1-kg-grey-345.webp?v=1725009953"},{"product_id":"pla-filament-1-75-mm","title":"PLA Filament 1.75 mm","description":"\u003cp\u003eEolas Prints PLA 1.75mm is our flagship filament — manufactured in Cantabria, Spain, from NatureWorks Ingeo PLA resin. Available in over 20 colours including standard, silk, matte, neon, and transition variants, it delivers consistent, reliable results across the full range of FDM printers. Made from food-contact-safe, toy-safe, and skin-safe certified raw material.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e50–60 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage\u003c\/td\u003e\n\u003ctd\u003eMinimal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood-contact-safe raw material\u003c\/td\u003e\n\u003ctd\u003eYes — virgin pellets and masterbatches certified to EU food-contact standards (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEco-friendly\u003c\/td\u003e\n\u003ctd\u003eDerived from renewable resources (corn starch \/ sugarcane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Note on Food Contact\u003c\/h2\u003e\n\u003cp\u003eOur food-contact certification applies to the \u003cstrong\u003eraw filament material\u003c\/strong\u003e — the virgin pellets and masterbatches we manufacture from — not to finished printed parts. 3D-printed surfaces contain microscopic gaps between layers that can harbour bacteria, and most printers use brass nozzles that may introduce trace metals into the print. For this reason, no 3D-printed object can be guaranteed food-safe by the filament alone. If you intend a part for food contact, print it with a stainless-steel nozzle and apply a food-safe sealant — and assess suitability for your specific use. This remains the responsibility of the maker.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed (standard)\u003c\/td\u003e\n\u003ctd\u003e40–100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed (High Speed PLA)\u003c\/td\u003e\n\u003ctd\u003eUp to 300 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePLA Variants\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard PLA\u003c\/strong\u003e — 20+ colours, ideal for prototypes, models, and everyday parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-high-speed-filament\" title=\"High Speed PLA\" aria-label=\"High Speed PLA\"\u003eHigh Speed PLA\u003c\/a\u003e\u003c\/strong\u003e — up to 300mm\/s, near-double strength of standard PLA, ABS-level impact resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-matte-filament\" title=\"PLA Matte\" aria-label=\"PLA Matte\"\u003ePLA Matte\u003c\/a\u003e\u003c\/strong\u003e — non-reflective finish that minimises visible layer lines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-silk-filament\" title=\"PLA Silk\" aria-label=\"PLA Silk\"\u003ePLA Silk\u003c\/a\u003e\u003c\/strong\u003e — high-gloss metallic finish in gold, silver, bronze, and copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-neon-filament\" title=\"PLA Neon\" aria-label=\"PLA Neon\"\u003ePLA Neon\u003c\/a\u003e\u003c\/strong\u003e — intense fluorescent colours: green, yellow, orange, and pink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-transition-filament\" title=\"PLA Transition\" aria-label=\"PLA Transition\"\u003ePLA Transition\u003c\/a\u003e\u003c\/strong\u003e — unique gradient effect from virgin colour-transition material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-ingeo-850-filament\" title=\"PLA Ingeo 850\" aria-label=\"PLA Ingeo 850\"\u003ePLA Ingeo 850\u003c\/a\u003e\u003c\/strong\u003e — reaches 85°C after annealing, heat-resistant alternative to ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/pla-antibacterial-filament\" title=\"PLA Antibacterial\" aria-label=\"PLA Antibacterial\"\u003ePLA Antibacterial\u003c\/a\u003e\u003c\/strong\u003e — ISO certified 99.9% more hygienic than standard PLA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrototypes, models, and decorative objects\u003c\/li\u003e\n\u003cli\u003eContainers and kitchen accessories (with appropriate food-safe sealing — see note above)\u003c\/li\u003e\n\u003cli\u003eChildren's toys and educational models\u003c\/li\u003e\n\u003cli\u003eWearable components and skin-contact parts\u003c\/li\u003e\n\u003cli\u003eArchitectural and product design models\u003c\/li\u003e\n\u003cli\u003eHigh-volume print farm production\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Datasheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/downloads.eolasprints.com\/flip-book\/c7620d54b7.html\" title=\"PLA filament technical datasheet\" target=\"_blank\" aria-label=\"PLA filament technical datasheet\"\u003eDownload\u003c\/a\u003e\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Pink","offer_id":42329912279299,"sku":"PLA-PRM-1.75M-PNK-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Grey","offer_id":42329912934659,"sku":"PLA-PRM-1.75M-GRY-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Natural","offer_id":42329914114307,"sku":"PLA-PRM-1.75M-NTR-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Black","offer_id":42324104413443,"sku":"PLA-PRM-1.75M-BLK-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Blue","offer_id":42324104478979,"sku":"PLA-PRM-1.75M-BLU-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Orange","offer_id":42329911984387,"sku":"PLA-PRM-1.75M-ORG-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Cyan","offer_id":42329912148227,"sku":"PLA-PRM-1.75M-CYN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Mint","offer_id":42329912410371,"sku":"PLA-PRM-1.75M-MNT-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Beige","offer_id":42329912541443,"sku":"PLA-PRM-1.75M-BEG-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ White","offer_id":42329912672515,"sku":"PLA-PRM-1.75M-WHT-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Dark Grey","offer_id":42329912803587,"sku":"PLA-PRM-1.75M-DGR-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Yellow","offer_id":42329913065731,"sku":"PLA-PRM-1.75M-YLW-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Green","offer_id":42329913196803,"sku":"PLA-PRM-1.75M-GRN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Dark Green","offer_id":42329913327875,"sku":"PLA-PRM-1.75M-DGN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Straw","offer_id":42329913458947,"sku":"PLA-PRM-1.75M-STW-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Light Orange","offer_id":42329913590019,"sku":"PLA-PRM-1.75M-LOG-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Turquoise","offer_id":42329913721091,"sku":"PLA-PRM-1.75M-TQS-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Violet","offer_id":42329913852163,"sku":"PLA-PRM-1.75M-VLT-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Baby Blue","offer_id":42329913983235,"sku":"PLA-PRM-1.75M-BBL-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Red","offer_id":42329914245379,"sku":"PLA-PRM-1.75M-RED-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Skin","offer_id":43538704662787,"sku":"PLA-PRM-1.75M-SKN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Brown","offer_id":52769767031111,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Dark Brown","offer_id":52769767063879,"sku":null,"price":19.9,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 2.5 Kg \/ Grey","offer_id":42329912967427,"sku":"PLA-PRM-1.75M-GRY-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 2.5 Kg \/ Natural","offer_id":42329914147075,"sku":"PLA-PRM-1.75M-NTR-2.5KG","price":49.75,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 2.5 Kg \/ Black","offer_id":42329911820547,"sku":"PLA-PRM-1.75M-BLK-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 2.5 Kg \/ White","offer_id":42329912705283,"sku":"PLA-PRM-1.75M-WHT-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 5 Kg \/ Grey","offer_id":42329913000195,"sku":"PLA-PRM-1.75M-GRY-5KG","price":117.5,"currency_code":"EUR","in_stock":false},{"title":"1.75 mm \/ 5 Kg \/ Natural","offer_id":42329914179843,"sku":"PLA-PRM-1.75M-NTR-5KG","price":117.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 5 Kg \/ Black","offer_id":42329911853315,"sku":"PLA-PRM-1.75M-BLK-5KG","price":117.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 5 Kg \/ White","offer_id":42329912738051,"sku":"PLA-PRM-1.75M-WHT-5KG","price":117.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-filament-1-75-mm-pink-3d-printer-250-g-914.webp?v=1724891823"},{"product_id":"pla-filament-2-85-mm","title":"PLA Filament 2.85 mm","description":"\u003cp\u003eEolas Prints PLA 2.85mm is the ideal choice for printers that require the wider format — including Ultimaker, LulzBot, and many other professional desktop machines. Manufactured in Cantabria, Spain, from NatureWorks Ingeo PLA resin, it delivers the same consistent quality and material certifications as our 1.75mm range. Made from food-contact-safe, toy-safe, and skin-safe certified raw material.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e50–60 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage\u003c\/td\u003e\n\u003ctd\u003eMinimal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood-contact-safe raw material\u003c\/td\u003e\n\u003ctd\u003eYes — virgin pellets and masterbatches certified to EU food-contact standards (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEco-friendly\u003c\/td\u003e\n\u003ctd\u003eDerived from renewable resources (corn starch \/ sugarcane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Note on Food Contact\u003c\/h2\u003e\n\u003cp\u003eOur food-contact certification applies to the \u003cstrong\u003eraw filament material\u003c\/strong\u003e — the virgin pellets and masterbatches we manufacture from — not to finished printed parts. 3D-printed surfaces contain microscopic gaps between layers that can harbour bacteria, and most printers use brass nozzles that may introduce trace metals into the print. For this reason, no 3D-printed object can be guaranteed food-safe by the filament alone. If you intend a part for food contact, print it with a stainless-steel nozzle and apply a food-safe sealant — and assess suitability for your specific use. This remains the responsibility of the maker.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrototypes, models, and decorative objects\u003c\/li\u003e\n\u003cli\u003eContainers and kitchen accessories (with appropriate food-safe sealing — see note above)\u003c\/li\u003e\n\u003cli\u003eChildren's toys and educational models\u003c\/li\u003e\n\u003cli\u003eWearable components and skin-contact parts\u003c\/li\u003e\n\u003cli\u003eArchitectural and product design models\u003c\/li\u003e\n\u003cli\u003eProfessional desktop printing on Ultimaker, LulzBot, and similar machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003eAvailable in over 20 colours in 1 kg spools. ISO 9001 and ISO 14001 certified. Also available in \u003ca href=\"\/en-us\/products\/pla-filament-1-75-mm\" title=\"PLA Filament 1.75mm\" aria-label=\"PLA Filament 1.75mm\"\u003e1.75mm diameter\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Datasheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/downloads.eolasprints.com\/flip-book\/c7620d54b7.html\" title=\"PLA filament technical datasheet\" target=\"_blank\" aria-label=\"PLA filament technical datasheet\"\u003eDownload\u003c\/a\u003e\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"2.85 mm \/ 1 Kg \/ Mint","offer_id":42330061111555,"sku":"PLA-PRM-2.85M-MNT-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Black","offer_id":42324109852931,"sku":"PLA-PRM-2.85M-BLK-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Blue","offer_id":42324109918467,"sku":"PLA-PRM-2.85M-BLU-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Orange","offer_id":42330060816643,"sku":"PLA-PRM-2.85M-ORG-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Cyan","offer_id":42330060914947,"sku":"PLA-PRM-2.85M-CYN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Pink","offer_id":42330061013251,"sku":"PLA-PRM-2.85M-PNK-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Beige","offer_id":42330061209859,"sku":"PLA-PRM-2.85M-BEG-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ White","offer_id":42330061308163,"sku":"PLA-PRM-2.85M-WHT-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Dark Grey","offer_id":42330061406467,"sku":"PLA-PRM-2.85M-DGR-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Grey","offer_id":42330061504771,"sku":"PLA-PRM-2.85M-GRY-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Yellow","offer_id":42330061603075,"sku":"PLA-PRM-2.85M-YLW-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Green","offer_id":42330061701379,"sku":"PLA-PRM-2.85M-GRN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Dark Green","offer_id":42330061799683,"sku":"PLA-PRM-2.85M-DGN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Straw","offer_id":42330061897987,"sku":"PLA-PRM-2.85M-STW-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Light Orange","offer_id":42330061996291,"sku":"PLA-PRM-2.85M-LOG-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Turquoise","offer_id":42330062094595,"sku":"PLA-PRM-2.85M-TQS-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Violet","offer_id":42330062192899,"sku":"PLA-PRM-2.85M-VLT-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Baby Blue","offer_id":42330062291203,"sku":"PLA-PRM-2.85M-BBL-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Natural","offer_id":42330062389507,"sku":"PLA-PRM-2.85M-NTR-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Red","offer_id":42330062487811,"sku":"PLA-PRM-2.85M-RED-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Skin","offer_id":43778687205635,"sku":"PLA-PRM-2.85M-SKN-1KG","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Black","offer_id":42330042761475,"sku":"PLA-PRM-2.85M-BLK-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Blue","offer_id":42330042827011,"sku":"PLA-PRM-2.85M-BLU-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Orange","offer_id":42330060849411,"sku":"PLA-PRM-2.85M-ORG-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ White","offer_id":42330061340931,"sku":"PLA-PRM-2.85M-WHT-2.5KG","price":49.75,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 2.5 Kg \/ Grey","offer_id":42330061537539,"sku":"PLA-PRM-2.85M-GRY-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Straw","offer_id":42330061930755,"sku":"PLA-PRM-2.85M-STW-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Turquoise","offer_id":42330062127363,"sku":"PLA-PRM-2.85M-TQS-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Violet","offer_id":42330062225667,"sku":"PLA-PRM-2.85M-VLT-2.5KG","price":49.75,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 2.5 Kg \/ Natural","offer_id":42330062422275,"sku":"PLA-PRM-2.85M-NTR-2.5KG","price":49.75,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 5 Kg \/ Black","offer_id":42330042794243,"sku":"PLA-PRM-2.85M-BLK-5KG","price":117.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 5 Kg \/ White","offer_id":42330061373699,"sku":"PLA-PRM-2.85M-WHT-5KG","price":117.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 5 Kg \/ Dark Grey","offer_id":42330061472003,"sku":"PLA-PRM-2.85M-DGR-5KG","price":117.5,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 5 Kg \/ Grey","offer_id":42330061570307,"sku":"PLA-PRM-2.85M-GRY-5KG","price":117.5,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 5 Kg \/ Natural","offer_id":42330062455043,"sku":"PLA-PRM-2.85M-NTR-5KG","price":117.5,"currency_code":"EUR","in_stock":false},{"title":"2,85 mm \/ 5 kg \/ Yellow","offer_id":53759776850247,"sku":null,"price":117.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-filament-2-85-mm-turquoise-3d-printer-1-kg-668.webp?v=1725568869"},{"product_id":"pla-transition-filament","title":"PLA Transition Filament","description":"\u003cp\u003eEolas Prints PLA Transition filament is made from the virgin colour-blend produced during our manufacturing process. As one colour changes over to another, a natural gradient of the two is created — rather than purging it, we spool it, producing a filament with a gradient effect that makes every print unique. Productive use of every metre, one-of-a-kind results.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour effect\u003c\/td\u003e\n\u003ctd\u003eNatural gradient — unique on every print\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage\u003c\/td\u003e\n\u003ctd\u003eMinimal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood-contact-safe raw material\u003c\/td\u003e\n\u003ctd\u003eYes — virgin pellets and masterbatches certified to EU food-contact standards (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Note on Food Contact\u003c\/h2\u003e\n\u003cp\u003eOur food-contact certification applies to the \u003cstrong\u003eraw filament material\u003c\/strong\u003e — the virgin pellets and masterbatches we manufacture from — not to finished printed parts. 3D-printed surfaces contain microscopic gaps between layers that can harbour bacteria, and most printers use brass nozzles that may introduce trace metals into the print. For this reason, no 3D-printed object can be guaranteed food-safe by the filament alone. If you intend a part for food contact, print it with a stainless-steel nozzle and apply a food-safe sealant — and assess suitability for your specific use. This remains the responsibility of the maker.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy Transition Filament?\u003c\/h2\u003e\n\u003cp\u003eTransition filament is the virgin material produced during the colour-change phase of manufacturing. As one colour gives way to the next, the two blend naturally. Instead of purging this material, we spool it into a filament that produces gradient colour effects in every print — making productive use of every metre and delivering a visually unique product with a gradient that no two spools share.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArtistic and decorative prints where unique appearance is valued\u003c\/li\u003e\n\u003cli\u003eDisplay models and prototypes\u003c\/li\u003e\n\u003cli\u003eConsumer products, gifts, and personalised items\u003c\/li\u003e\n\u003cli\u003eEducational projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003eManufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm and 2.85mm.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Transition","offer_id":42324485439747,"sku":"PLA-TRN-1.75M-1KG","price":13.9,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Transition","offer_id":42324485505283,"sku":"PLA-TRN-2.85M-1KG","price":13.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-transition-filament-pair-3d-printed-boots-1-75-mm-1-kg-960.webp?v=1725277266"},{"product_id":"pla-matte-filament","title":"PLA Matte Filament","description":"\u003cp\u003eEolas Prints PLA Matte filament delivers a smooth, non-reflective finish that significantly reduces the appearance of layer lines on printed parts. Prints come off the bed looking clean and professional without any post-processing — ideal for display models, architectural models, and anything where surface quality matters more than gloss.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eMatte — non-reflective, minimal visible layer lines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShrinkage\u003c\/td\u003e\n\u003ctd\u003eMinimal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay models and presentation prototypes\u003c\/li\u003e\n\u003cli\u003eArtistic and decorative prints\u003c\/li\u003e\n\u003cli\u003eConsumer product housings and enclosures\u003c\/li\u003e\n\u003cli\u003eArchitectural models\u003c\/li\u003e\n\u003cli\u003eEducational models and classroom projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003ePLA Matte is manufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm in multiple colours.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Red","offer_id":42726060261635,"sku":"PLA-PRM-1.75M-RED-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Black","offer_id":42726057902339,"sku":"PLA-PRM-1.75M-BLK-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Blue","offer_id":42726058033411,"sku":"PLA-PRM-1.75M-BLU-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ White","offer_id":42726058688771,"sku":"PLA-PRM-1.75M-WHT-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Yellow","offer_id":42726059081987,"sku":"PLA-PRM-1.75M-YLW-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Red","offer_id":42758638928131,"sku":"PLA-PRM-2.85M-RED-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Black","offer_id":42758638469379,"sku":"PLA-PRM-2.85M-BLK-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Blue","offer_id":42758638567683,"sku":"PLA-PRM-2.85M-BLU-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ White","offer_id":42758638665987,"sku":"PLA-PRM-2.85M-WHT-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Yellow","offer_id":42758638764291,"sku":"PLA-PRM-2.85M-YLW-M-1KG","price":25.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-matte-filament-blue-vase-diamond-patterned-1-75-mm-1-kg-882.webp?v=1724968453"},{"product_id":"pla-silk-filament","title":"PLA Silk Filament","description":"\u003cp\u003eEolas Prints PLA Silk filament produces a stunning high-gloss metallic finish that hides layer lines and gives prints a polished, professional appearance straight off the bed — no post-processing required. Available in gold, silver, bronze, and copper, it is ideal for decorative objects, display models, jewellery, and anything where appearance matters as much as function.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHigh-gloss silk-like metallic — gold, silver, bronze, copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood-contact-safe raw material\u003c\/td\u003e\n\u003ctd\u003eYes — virgin pellets and masterbatches certified to EU food-contact standards (see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe (raw material)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable diameters\u003c\/td\u003e\n\u003ctd\u003e1.75mm and 2.85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Note on Food Contact\u003c\/h2\u003e\n\u003cp\u003eOur food-contact certification applies to the \u003cstrong\u003eraw filament material\u003c\/strong\u003e — the virgin pellets and masterbatches we manufacture from — not to finished printed parts. 3D-printed surfaces contain microscopic gaps between layers that can harbour bacteria, and most printers use brass nozzles that may introduce trace metals into the print. For this reason, no 3D-printed object can be guaranteed food-safe by the filament alone. If you intend a part for food contact, print it with a stainless-steel nozzle and apply a food-safe sealant — and assess suitability for your specific use. This remains the responsibility of the maker.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e200–230°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–60 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003eModerate — avoid maximum fan speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDecorative objects, figurines, and display models\u003c\/li\u003e\n\u003cli\u003eJewellery, awards, and trophies\u003c\/li\u003e\n\u003cli\u003eArchitectural and product design models\u003c\/li\u003e\n\u003cli\u003eGifts and personalised items\u003c\/li\u003e\n\u003cli\u003eCosplay props and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003ePLA Silk is manufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm and 2.85mm in gold, silver, bronze, and copper.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Gold","offer_id":48637851533639,"sku":"PLA-SLK-1.75M-GLD-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Silver","offer_id":48637851566407,"sku":"PLA-SLK-1.75M-SLV-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Bronze","offer_id":48637851599175,"sku":"PLA-SLK-1.75M-BRZ-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Copper","offer_id":48637851631943,"sku":"PLA-SLK-1.75M-COP-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Gold","offer_id":48637851664711,"sku":"PLA-SLK-2.8M-GLD-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Silver","offer_id":48637851697479,"sku":"PLA-SLK-2.8M-SLV-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"2.85 mm \/ 1 Kg \/ Bronze","offer_id":48637851730247,"sku":"PLA-SLK-2.8M-BRZ-1KG","price":25.5,"currency_code":"EUR","in_stock":false},{"title":"2.85 mm \/ 1 Kg \/ Copper","offer_id":48637851763015,"sku":"PLA-SLK-2.8M-COP-1KG","price":25.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-silk-filament-spool-yellow-3d-1-75-mm-1-kg-gold-681.webp?v=1725008768"},{"product_id":"pla-neon-filament","title":"PLA Neon Filament","description":"\u003cp\u003eEolas Prints PLA Neon filament delivers intensely vibrant, fluorescent colours that make prints stand out immediately. The neon pigment formulation minimises layer lines and enhances surface smoothness, so your prints look as striking as possible with no post-processing. Available in neon green, yellow, orange, and pink.\u003c\/p\u003e\n\n\u003ch2\u003eKey Properties\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eNeon green, yellow, orange, pink\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eFluorescent — minimal visible layer lines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.24 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood contact safe\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSkin contact safe\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToy safe\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle temperature\u003c\/td\u003e\n\u003ctd\u003e195–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed temperature\u003c\/td\u003e\n\u003ctd\u003e0–60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint speed\u003c\/td\u003e\n\u003ctd\u003e40–100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling fan\u003c\/td\u003e\n\u003ctd\u003e80–100% after first layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter tolerance\u003c\/td\u003e\n\u003ctd\u003e±0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSports equipment, safety gear, and high-visibility parts\u003c\/li\u003e\n\u003cli\u003eChildren's toys, games, and educational models\u003c\/li\u003e\n\u003cli\u003eArtistic and decorative prints\u003c\/li\u003e\n\u003cli\u003eTrade show displays and attention-grabbing prototypes\u003c\/li\u003e\n\u003cli\u003eCosplay props and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManufactured in Spain\u003c\/h2\u003e\n\u003cp\u003ePLA Neon is manufactured at Eolas Prints' facility in Cantabria, Spain, under ISO 9001 and ISO 14001 standards. Available in 1.75mm, 1 kg spools.\u003c\/p\u003e","brand":"Eolas Prints","offers":[{"title":"1.75 mm \/ 1 Kg \/ Green","offer_id":51546064585031,"sku":"PLA-NEO-1.75M-GRN-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Yellow","offer_id":51546064519495,"sku":"PLA-NEO-1.75M-YLW-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Orange","offer_id":51546064552263,"sku":"PLA-NEO-1.75M-ORG-1KG","price":25.5,"currency_code":"EUR","in_stock":true},{"title":"1.75 mm \/ 1 Kg \/ Pink","offer_id":52748929728839,"sku":"PLA-NEO-1.75M-PNK-1KG","price":25.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/pla-neon-filament-bright-green-1-75-mm-1-kg-902.webp?v=1759189958"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/collections\/pla-matte-filament-blue-vase-diamond-patterned-1-75-mm-1-kg-882.webp?v=1781954122","url":"https:\/\/eolasprints.com\/en-cy\/collections\/decorative-display-filament.oembed","provider":"Eolas Prints","version":"1.0","type":"link"}