{"title":"Multicolor \u0026 Multi-Material 3D Printers","description":"\u003cp\u003ePrint in multiple colours and materials in a single job with these multicolour and multi-material 3D printers. Whether you want vibrant multi-colour models or the ability to combine rigid and flexible materials with dissolvable supports, these machines handle it through automated material systems and multi-tool designs.\u003c\/p\u003e\u003cp\u003eMulti-material printing transforms what you can make: colourful figurines and educational models, branded parts in your exact colours, signage, and functional assemblies that mix materials in one print. Systems like Bambu Lab's AMS and Flashforge's tool-changing Creator series automate the colour and material swaps, while Prusa's multi-tool XL uses independent heads for the cleanest multi-material results with minimal waste.\u003c\/p\u003e\u003cp\u003eA quick honest note: multicolour adds filament management and some purge waste, so if you only ever print in one colour you may not need it — but for makers who want creative range, it is transformative. As an authorised Prusa reseller and Flashforge distributor, Eolas Prints supports every multi-material machine with genuine parts and expert setup advice for makers across Spain and the EU.\u003c\/p\u003e\u003cp\u003eNew to 3D printing? Start with our \u003ca href=\"\/en-ch\/collections\/beginner-3d-printers\"\u003ebeginner 3D printers\u003c\/a\u003e and add multicolour later.\u003c\/p\u003e","products":[{"product_id":"original-prusa-xl-fully-assembled","title":"Original Prusa XL - Fully Assembled","description":"\u003cp\u003eThe Original Prusa XL is Prusa Research's large-format multi-material 3D printer, built around a unique tool-changing system rather than the filament-switching approach used by most multi-material solutions. Up to five independent toolheads — each a complete extruder — mount on the same CoreXY gantry and swap in and out automatically during the print. Because each toolhead purges independently and there is no shared hot zone between filaments, colour transitions are clean and material mixing is eliminated. The XL's 360×360×360 mm build volume is among the largest available on any desktop FDM printer.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY with tool changer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e360 × 360 × 360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e290°C (per toolhead)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToolheads\u003c\/td\u003e\n\u003ctd\u003e1, 2, or 5 (selectable at purchase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder (per head)\u003c\/td\u003e\n\u003ctd\u003eNextruder — direct drive, load cell auto-levelling per toolhead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed\u003c\/td\u003e\n\u003ctd\u003eSegmented heated — independent zone control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed surface\u003c\/td\u003e\n\u003ctd\u003eRemovable spring steel sheet (magnetic PEI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Shaper\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eEthernet, Wi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote monitoring\u003c\/td\u003e\n\u003ctd\u003ePrusa Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional\u003c\/td\u003e\n\u003ctd\u003eEnclosure (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eOpen-source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eTool Changer vs Filament Switcher — Why It Matters\u003c\/h2\u003e\n\u003cp\u003eMost multi-material systems (including the Prusa MMU) route multiple filaments through a single hotend, switching by retracting one and advancing another. This approach produces a mixing zone during transitions and requires purging a significant volume of filament to achieve clean colour changes — particularly with materials that have different melt characteristics. The XL's tool changer is architecturally different: each toolhead is independent, with its own hotend, heater, sensor, and extruder. When the printer switches materials, it docks the current toolhead and picks up the next. There is no shared melt zone, no cross-contamination, and the purge requirement per transition is fundamentally lower. The practical result is cleaner interfaces between materials — including support interfaces — and the ability to mix materials with very different processing temperatures (e.g. 250°C Nylon support removal with 220°C PETG main body) without compromise.\u003c\/p\u003e\n\n\u003ch2\u003eSegmented Heated Bed\u003c\/h2\u003e\n\u003cp\u003eThe XL's 360×360mm bed is divided into independent heating zones. Rather than heating the entire bed to temperature for small prints (wasting energy and extending warm-up time), only the zones covering the active print area are heated. This also reduces thermal stress on the bed surface during large prints where even heating across a 360mm span would otherwise be difficult to achieve with a single heater element.\u003c\/p\u003e\n\n\u003ch2\u003e1, 2, or 5 Toolheads — Which to Choose\u003c\/h2\u003e\n\u003cp\u003eThe XL is available with 1, 2, or 5 toolheads at purchase, with additional toolheads addable later. The \u003cstrong\u003e1-toolhead configuration\u003c\/strong\u003e gives you a large-format single-material printer with CoreXY kinematics — a valid choice if your primary need is the build volume rather than multi-material capability. The \u003cstrong\u003e2-toolhead configuration\u003c\/strong\u003e is the most practical starting point for multi-material: dual-colour prints and soluble\/breakaway support in a second material. The \u003cstrong\u003e5-toolhead configuration\u003c\/strong\u003e enables full multi-colour or multi-material prints with up to five different filaments per job.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG, ASA, ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e PC Blend, PA-11, PA-12, PA-CF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU (direct drive per head handles flexible reliably)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoluble supports:\u003c\/strong\u003e BVOH, PVA (with compatible pairing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct designers needing multi-colour or multi-material prototypes with clean material interfaces and soluble support removal\u003c\/li\u003e\n\u003cli\u003eEngineers printing large-format single-piece structural parts that exceed standard desktop printer capacity\u003c\/li\u003e\n\u003cli\u003eArtists and studios producing complex multi-colour prints where filament-switcher purge waste is prohibitive\u003c\/li\u003e\n\u003cli\u003eAdvanced makers and professionals who want Prusa's ecosystem and open-source approach in a large-format multi-material platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official Prusa Research reseller based in Cantabria, Spain. Available with 1, 2, or 5 toolheads. EU warranty and support included.\u003c\/p\u003e","brand":"Prusa Research","offers":[{"title":"1 - Toolhead","offer_id":50369202749767,"sku":"PRU-XL-1T-3D-PRN","price":2399.0,"currency_code":"EUR","in_stock":true},{"title":"2 - Toolheads","offer_id":50369202782535,"sku":"PRU-XL-2T-3D-PRN","price":3099.0,"currency_code":"EUR","in_stock":true},{"title":"5 - Toolheads","offer_id":50369202815303,"sku":"PRU-XL-5T-3D-PRN","price":4099.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/original-prusa-xl-fully-assembled-3d-printer-open-793.webp?v=1763066398"},{"product_id":"bambu-lab-p1s-combo","title":"Bambu Lab P1S Combo","description":"\u003cp\u003eThe \u003cstrong\u003eBambu Lab P1S Combo\u003c\/strong\u003e is a fully enclosed, mid-range CoreXY 3D printer designed for enthusiasts and professionals who need reliable high-temperature printing with multi-colour capability straight out of the box. Bundled with the AMS (Automatic Material System) for up to 16-colour printing, the P1S Combo is one of the most capable enclosed printers at its price point.\u003c\/p\u003e\u003cp\u003eIts fully enclosed chamber makes the P1S Combo ideal for printing engineering-grade filaments — ABS, ASA, PA, and PC — that need temperature stability to avoid warping and delamination. The built-in HEPA and activated carbon filtration system makes it safe to run in offices or home studios without venting concerns.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 256 × 256 × 256 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e up to 500 mm\/s peak \/ 20,000 mm\/s² acceleration — prints a Benchy in 18 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtruder:\u003c\/strong\u003e direct drive with hardened steel gears\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 300°C hardened steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 100°C magnetic flexible textured PEI plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-colour:\u003c\/strong\u003e up to 16 colours with AMS (included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring:\u003c\/strong\u003e built-in chamber camera for remote monitoring and timelapse recording\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e HEPA + activated carbon for safe ABS\/ASA printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e fully automatic — bed levelling, flow dynamics, vibration compensation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e colour touchscreen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup time:\u003c\/strong\u003e under 15 minutes out of the box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e dual-band Wi-Fi, Bambu Studio, Bambu Handy app\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIncludes the AMS\u003c\/strong\u003e — Bambu Lab's Automatic Material System for seamless filament switching across up to 16 colours in a single print. Perfect for colour-coded engineering parts, multi-material functional prototypes, or detailed artistic models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible filaments:\u003c\/strong\u003e PLA, PETG, TPU, ABS, ASA, PA (Nylon), PC, PVA, and carbon- or glass-fibre reinforced variants.\u003c\/p\u003e\u003cp\u003eLooking for the next step up? The \u003cstrong\u003eBambu Lab P2S\u003c\/strong\u003e is the 2025 successor to the P1S, featuring a PMSM servo extruder with 70% more extrusion force, a 5\" full-colour touchscreen, and the AMS 2 Pro with active filament drying.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":50728002388295,"sku":"BLB-P1S-C-3D-PRN","price":799.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/bambu-lab-p1s-combo-815.webp?v=1734018524"},{"product_id":"bambu-lab-a1","title":"Bambu Lab A1","description":"\u003cp\u003eThe \u003cstrong\u003eBambu Lab A1\u003c\/strong\u003e is an open-frame, beginner-friendly 3D printer built for speed, ease of use, and vibrant multi-colour printing. Available as a standalone printer or as the \u003cstrong\u003eA1 Combo\u003c\/strong\u003e bundled with the AMS (Automatic Material System) for effortless multi-colour prints — up to 4 colours per job.\u003c\/p\u003e\u003cp\u003eThe A1 uses a \u003cstrong\u003ebed-slinger design\u003c\/strong\u003e (the build plate moves along the Y-axis while the toolhead handles X and Z), which keeps the machine compact, cost-effective, and easy to maintain. Unlike Bambu Lab's enclosed printers, the A1 is \u003cstrong\u003eopen-frame\u003c\/strong\u003e — ideal for PLA, PETG, TPU, and PLA-CF, and a natural choice for anyone starting out in 3D printing or printing in a well-ventilated space.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 256 × 256 × 256 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e up to 500 mm\/s peak \/ 10,000 mm\/s² acceleration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtruder:\u003c\/strong\u003e direct drive with all-metal hotend\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 300°C, tool-free quick-swap magnetic mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 100°C dual-sided magnetic flexible PEI plate, auto-levelling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e 2.7\" colour touchscreen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-colour:\u003c\/strong\u003e up to 4 colours with AMS (included in A1 Combo)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring:\u003c\/strong\u003e built-in camera for remote viewing and timelapse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e fully automatic — bed levelling, flow dynamics, vibration compensation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e dual-band Wi-Fi, Bambu Studio, Bambu Handy app\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup time:\u003c\/strong\u003e under 15 minutes out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eA1 Combo includes the AMS\u003c\/strong\u003e — Bambu Lab's Automatic Material System for seamless filament switching across up to 4 colours or materials in a single print. Perfect for colour-coded models, dual-material functional parts, or multi-filament artistic pieces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible filaments:\u003c\/strong\u003e PLA, PETG, TPU, PLA-CF, PLA Silk, and other filaments up to 300°C. Not designed for high-temperature engineering filaments (ABS, ASA, PA, PC) — for those, see the Bambu Lab P2S or H2S.\u003c\/p\u003e\u003cp\u003eFast, reliable, and genuinely simple to use, the Bambu Lab A1 is the ideal first Bambu printer — or a dedicated machine for high-volume PLA and PETG printing alongside an existing setup.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"A1 Combo","offer_id":51817654255943,"sku":"BLB-A1-C-3D-PRN","price":599.0,"currency_code":"EUR","in_stock":true},{"title":"A1","offer_id":51817654223175,"sku":"BLB-A1-3D-PRN","price":429.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/bambu-lab-a1-3d-printer-multi-filament-combo-528.webp?v=1750864582"},{"product_id":"bambu-lab-h2d","title":"Bambu Lab H2D","description":"\u003cp\u003eThe \u003cstrong\u003eBambu Lab H2D\u003c\/strong\u003e is Bambu Lab's most advanced desktop 3D printer — a large-format, dual-nozzle powerhouse designed for creators, engineers, and educators who need the ultimate in material versatility and print precision. With a \u003cstrong\u003e350 × 320 × 325 mm build volume\u003c\/strong\u003e, a \u003cstrong\u003etrue dual-nozzle system\u003c\/strong\u003e, and an \u003cstrong\u003eactively heated 65°C chamber\u003c\/strong\u003e, the H2D handles everything from everyday PLA to demanding engineering filaments like PA-CF, PPS, and PC — all in one machine.\u003c\/p\u003e\u003cp\u003eThe dual-nozzle architecture enables two key capabilities unavailable on single-nozzle printers: \u003cstrong\u003etrue multi-material printing\u003c\/strong\u003e (e.g. PLA + TPU in a single job) and \u003cstrong\u003esoluble support printing\u003c\/strong\u003e (e.g. using PVA supports that dissolve in water for complex geometries with no cleanup). Combined with 5μm optical motion calibration and a closed-loop PMSM servo extruder, the H2D delivers exceptional surface quality and dimensional accuracy at speeds up to 600 mm\/s.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 350 × 320 × 325 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e up to 600 mm\/s \/ 20,000 mm\/s² acceleration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzles:\u003c\/strong\u003e dual — main nozzle + auxiliary nozzle for true multi-material and soluble support printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle temp:\u003c\/strong\u003e 350°C all-metal hardened steel, tool-free quick-swap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber:\u003c\/strong\u003e actively heated to 65°C for engineering filament stability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 120°C dual-sided magnetic flexible PEI plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 5μm optical motion calibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtruder:\u003c\/strong\u003e closed-loop PMSM servo for real-time clog detection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-colour:\u003c\/strong\u003e up to 16 colours with AMS 2 Pro (included in AMS Combo)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e activated carbon + HEPA for safe ABS\/ASA\/PA printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e 5\" full-colour touchscreen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional modules:\u003c\/strong\u003e 10W\/40W laser engraving and digital cutting (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 200–240V — compatible across Europe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e dual-band Wi-Fi, Bambu Studio, Bambu Handy app\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAMS Combo includes the AMS 2 Pro\u003c\/strong\u003e — Bambu Lab's second-generation Automatic Material System with active filament drying, improved routing, and support for up to 16 colour or material changes per print. Essential for multi-material and multi-colour engineering projects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the H2D differ from the H2S?\u003c\/strong\u003e The H2D features a \u003cstrong\u003edual nozzle\u003c\/strong\u003e — allowing simultaneous use of two materials (e.g. PLA + soluble PVA supports) in a single print. The H2S is a single-nozzle variant of the same machine: same build volume, same chamber heating, lower price. If you need soluble supports or true two-material extrusion, the H2D is the choice. If single-nozzle with AMS multi-colour is sufficient, the H2S offers excellent value.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible filaments:\u003c\/strong\u003e PLA, PETG, TPU, ABS, ASA, PA (Nylon), PC, PET, PPS, PVA, BVOH, and carbon- or glass-fibre reinforced variants (PA-CF, PETG-CF, PLA-CF, ABS-GF).\u003c\/p\u003e\u003cp\u003eThe Bambu Lab H2D is where desktop 3D printing meets professional fabrication capability — built to expand what is possible on your workbench.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"AMS Combo","offer_id":51947816681799,"sku":"BLB-H2D-C-3D-PRN","price":2799.0,"currency_code":"EUR","in_stock":true},{"title":"H2D","offer_id":51947816714567,"sku":"BLB-H2D-3D-PRN","price":2449.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/bambu-lab-h2d-silver-black-3d-181.webp?v=1753011738"},{"product_id":"flashforge-ad5x-multi-colour","title":"Flashforge AD5X Multi-Colour","description":"\u003cp\u003eThe Flashforge Adventurer AD5X is an open-frame, dual-filament CoreXY 3D printer that brings multi-colour and multi-material printing to the Adventurer series. With its four-filament Intelligent Filament System (IFS), automatic filament switching, and a fast CoreXY motion system, the AD5X enables multi-colour prints, soluble support removal, and two-material functional parts in a compact desktop machine at an accessible price point. An optional enclosure kit is available for temperature-sensitive materials.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY, open-frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e220 × 220 × 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament inputs\u003c\/td\u003e\n\u003ctd\u003eFour — IFS automatic switching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax print speed\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder\u003c\/td\u003e\n\u003ctd\u003eDirect drive — quick-swap steel-insert nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed levelling\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild surface\u003c\/td\u003e\n\u003ctd\u003eDual-sided PEI spring steel plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eOpen-frame — optional enclosure kit available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eMulti-Filament — What It Enables\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMulti-colour printing\u003c\/strong\u003e — the most common application: up to four colours in a single print without manual filament changes. The AD5X switches between spools automatically during the print via the IFS. Purge requirements between colour changes mean some waste per transition, but the workflow is fully automated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoluble support removal\u003c\/strong\u003e — using a water-soluble support material (PVA) alongside the main filament. Supports dissolve in water, leaving clean underhangs and overhangs with no manual support removal and no surface marks. This is the most practical benefit for engineering and prototype users.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti-material functional parts\u003c\/strong\u003e — for example, a rigid structure with a TPU overmoulded grip section. The 300°C nozzle ceiling enables material pairings that require elevated temperatures. For high-shrinkage materials such as ABS or ASA, the optional enclosure kit is recommended to maintain a stable chamber temperature.\u003c\/p\u003e\n\n\u003ch2\u003eMaterial Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e PLA, PETG, ABS, ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering:\u003c\/strong\u003e PA-12 Nylon, PC Blend\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible:\u003c\/strong\u003e TPU 95A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoluble supports:\u003c\/strong\u003e PVA (compatible with PLA pairing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite:\u003c\/strong\u003e PLA-CF, PETG-CF (hardened nozzle recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigners producing multi-colour prototypes and display models without post-painting\u003c\/li\u003e\n\u003cli\u003eEngineers who want soluble support capability in a compact machine\u003c\/li\u003e\n\u003cli\u003eMakers experimenting with multi-material functional parts at an accessible price point\u003c\/li\u003e\n\u003cli\u003eStudios that need automated multi-colour output at high speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an authorised Flashforge distributor based in Cantabria, Spain. EU warranty and support included.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":52227556344135,"sku":"FLF-AD5X-3D-PRN","price":399.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-ad5x-multi-colour-3d-printer-two-439.webp?v=1756320499"},{"product_id":"bambu-lab-p2s","title":"Bambu Lab P2S","description":"\u003cp\u003eThe \u003cstrong\u003eBambu Lab P2S\u003c\/strong\u003e is the fully enclosed, mid-range CoreXY 3D printer that sets the new benchmark for speed, reliability, and ease of use. Launched in October 2025, it is the direct successor to the P1S and sits at the heart of Bambu Lab's lineup — above the open-frame A series for those who need enclosure and high-temperature capability, and below the H2 series for everyday professional use.\u003c\/p\u003e\n\n\u003cp\u003eAt its core, the P2S is driven by a \u003cstrong\u003ePMSM servo extruder (DynaSense)\u003c\/strong\u003e, delivering 8.5 kg of extrusion force — 70% more than its predecessor — with 20 kHz position sampling for real-time clog and grinding detection. Paired with a \u003cstrong\u003e300°C hardened steel quick-swap nozzle\u003c\/strong\u003e and a \u003cstrong\u003e110°C heated bed\u003c\/strong\u003e, the P2S handles PLA, PETG, TPU, ABS, ASA, PA, PC, and carbon- or glass-fibre reinforced filaments without hesitation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 256 × 256 × 256 mm — plenty of room for functional parts, terrain, and multi-part assemblies\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e up to 600 mm\/s peak \/ 20,000 mm\/s² acceleration\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtruder:\u003c\/strong\u003e PMSM servo (DynaSense) — 70% more force than P1S, detects clogs in real time at 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNozzle:\u003c\/strong\u003e 300°C hardened steel, tool-free quick-swap magnetic mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBed:\u003c\/strong\u003e 110°C magnetic flexible textured PEI plate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScreen:\u003c\/strong\u003e 5\" full-colour touchscreen with second-generation Bambu UI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-colour:\u003c\/strong\u003e up to 16 colours with AMS 2 Pro (included in Combo)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMonitoring:\u003c\/strong\u003e built-in chamber camera, AI failure detection (spaghetti, air printing, nozzle clumping)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFiltration:\u003c\/strong\u003e HEPA + activated carbon for safe ABS\/ASA printing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e fully automatic — bed levelling, flow dynamics, vibration compensation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e dual-band Wi-Fi, Bambu Studio, Bambu Handy app\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eAMS Combo includes the AMS 2 Pro\u003c\/strong\u003e — Bambu Lab's second-generation Automatic Material System with active filament drying and smoother multi-material management. Perfect for multi-colour prints or printing with multiple filament types in a single job.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible filaments:\u003c\/strong\u003e PLA, PETG, TPU, ABS, ASA, PA (Nylon), PC, PVA, BVOH, and carbon- or glass-fibre reinforced variants.\u003c\/p\u003e\n\n\u003cp\u003eWhether you are printing functional engineering prototypes, detailed figurines, or multi-colour cosplay props, the Bambu Lab P2S delivers the reliability and print quality to match your ambition — straight out of the box.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"AMS Combo","offer_id":52536709480775,"sku":"BLB-P2S-C-3D-PRN","price":899.0,"currency_code":"EUR","in_stock":true},{"title":"P2S","offer_id":52536709513543,"sku":"BLB-P2S-3D-PRN","price":649.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/bambu-lab-p2s-combo-gray-3d-printer-476.webp?v=1760475514"},{"product_id":"bambu-lab-x2d","title":"Bambu Lab X2D","description":"\u003cp\u003eThe Bambu Lab X2D is a dual-nozzle enclosed FDM 3D printer designed for users who regularly print with support materials, multi-material combinations, or engineering filaments. Where most desktop printers rely on a single nozzle for both the part and its supports — requiring the same material for both, which limits clean removal — the X2D dedicates one nozzle to the part and a second to the support structure. This changes the quality ceiling on complex geometry: supports in PVA, BVOH, or HIPS dissolve or peel cleanly away from surfaces that would otherwise require manual work and leave marks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY, fully enclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003eMain nozzle: 256 × 256 × 260 mm \/ Dual nozzle: 235.5 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e300°C (per nozzle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax chamber temperature\u003c\/td\u003e\n\u003ctd\u003e65°C (active heating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle system\u003c\/td\u003e\n\u003ctd\u003eDual nozzle — independent main + auxiliary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed surface\u003c\/td\u003e\n\u003ctd\u003eTextured PEI build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003e3-stage — G3 pre-filter + H12 HEPA + activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensors\u003c\/td\u003e\n\u003ctd\u003e31 across the system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eBelow 50 dB (typical conditions, active motor noise cancelling)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMonitoring\u003c\/td\u003e\n\u003ctd\u003eAI camera — start checks and in-print failure detection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, LAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariants\u003c\/td\u003e\n\u003ctd\u003eX2D (printer only) \/ X2D AMS Combo (includes AMS 2 Pro)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDual Nozzle — How It Changes Support Printing\u003c\/h2\u003e\n\u003cp\u003eA single-nozzle multi-material setup switches filaments within the same nozzle — meaning both the part material and the support material pass through the same hotend and require purging between transitions. The X2D's dual-nozzle architecture keeps the two materials completely separate: the main nozzle never touches the support filament and vice versa. This eliminates cross-contamination between part and support, reduces purge waste per transition, and allows the two materials to be processed at different temperatures simultaneously — which is essential for pairing materials with very different thermal requirements, such as PETG with BVOH supports or ABS with HIPS.\u003c\/p\u003e\n\n\u003ch2\u003e65°C Active Chamber Heating\u003c\/h2\u003e\n\u003cp\u003eThe actively heated chamber reaches and maintains 65°C throughout the print. For engineering materials — ABS, ASA, PA-CF, and PC in particular — this addresses the root cause of warping and delamination: the temperature gradient between a hot first layer and a cooling ambient environment. At 65°C chamber temperature, even large flat ABS and ASA prints maintain dimensional stability from first layer to last — these are notoriously prone to warping on less thermally stable machines.\u003c\/p\u003e\n\n\u003ch2\u003e300°C Nozzle — Material Range\u003c\/h2\u003e\n\u003cp\u003eThe 300°C nozzle ceiling covers the complete range of common engineering thermoplastics from both nozzles: PLA, PETG, ABS, ASA, PA-12 Nylon, PA-CF, PC Blend, and TPU. Soluble support materials including PVA and BVOH also operate within this range. For the most demanding materials (PEEK, PEI), 300°C is at the lower boundary — but for the vast majority of functional engineering part production, it is sufficient.\u003c\/p\u003e\n\n\u003ch2\u003e3-Stage Filtration\u003c\/h2\u003e\n\u003cp\u003eThe X2D's filtration system captures airborne particles and VOCs at three stages: a G3 pre-filter removes larger particles first, the H12 HEPA layer captures fine particulate matter down to 0.3 microns at 99.5% efficiency, and the activated carbon stage adsorbs VOCs and odours from ABS, ASA, and Nylon printing. This system makes the X2D appropriate for office environments, shared workspaces, and facilities with indoor air quality requirements.\u003c\/p\u003e\n\n\u003ch2\u003eAMS Combo — Automatic Material System\u003c\/h2\u003e\n\u003cp\u003eThe X2D AMS Combo variant includes the AMS 2 Pro multi-material unit. The AMS 2 Pro holds up to 4 filament spools and feeds them to the printer automatically, enabling multi-colour and multi-material jobs from a single filament loading operation. Combined with the X2D's dual nozzle, the AMS Combo is the most complete multi-material configuration: the AMS handles filament switching on the main nozzle while the auxiliary nozzle maintains the support material — allowing complex multi-colour prints with dedicated, cleanly removable supports.\u003c\/p\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEngineers and product designers who print functional parts in ABS, ASA, Nylon, or PC requiring clean support interfaces\u003c\/li\u003e\n\u003cli\u003ePrototyping studios that regularly produce complex geometry requiring soluble or break-away support material\u003c\/li\u003e\n\u003cli\u003eProfessionals who want multi-material printing capability — including PLA + TPU flexible-rigid combinations — without the compromises of single-nozzle purging\u003c\/li\u003e\n\u003cli\u003eOffice and studio environments needing an enclosed, filtered machine for engineering filaments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab X2D printer\u003c\/li\u003e\n\u003cli\u003eTextured PEI build plate\u003c\/li\u003e\n\u003cli\u003eAccessories box\u003c\/li\u003e\n\u003cli\u003eSpool holder\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eAMS 2 Pro included with X2D AMS Combo variant\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints sells genuine, 100% original Bambu Lab products, shipped from Cantabria, Spain. Available as X2D (printer only) or X2D AMS Combo. EU warranty and support included.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"AMS Combo","offer_id":53703408222535,"sku":"BLB-X2D-C-3D-PRN","price":999.0,"currency_code":"EUR","in_stock":true},{"title":"X2D","offer_id":53703408255303,"sku":"BLB-X2D-3D-PRN","price":749.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/bambu-lab-x2d-black-3d-933.webp?v=1776183620"},{"product_id":"bambu-lab-a2l","title":"Bambu Lab A2L","description":"\u003cp\u003eThe \u003cstrong\u003eBambu Lab A2L\u003c\/strong\u003e is a large-format, open-frame 3D printer built for makers, designers, and creators who need more build space without stepping up to an enclosed machine. Its 330 × 320 × 325 mm build volume is 105% larger than the standard A1, letting you print full-scale helmets, large props, and architectural models in a single piece. Beyond printing, an optional multi-tool ecosystem turns the A2L into a blade cutter or pen plotter — a genuinely versatile machine for a workshop or makerspace.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — open frame (bed-slinger)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e330 × 320 × 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax bed temperature\u003c\/td\u003e\n\u003ctd\u003e80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder\u003c\/td\u003e\n\u003ctd\u003ePMSM closed-loop servo, direct drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax speed\u003c\/td\u003e\n\u003ctd\u003eUp to 1000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration control\u003c\/td\u003e\n\u003ctd\u003eAdaptive vibration compensation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMulti-colour\u003c\/td\u003e\n\u003ctd\u003eAMS Lite — up to 4 colours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMulti-tool modules\u003c\/td\u003e\n\u003ctd\u003eOptional blade cutting and pen plotting (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eBelow 49 dB in Silent Mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible materials\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eDual-band Wi-Fi, Bambu Studio, Bambu Handy app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLarge-Format Open-Frame Printing\u003c\/h2\u003e\n\u003cp\u003eThe A2L's 330 × 320 × 325 mm build volume is its defining feature — 105% more space than the standard A1, eliminating the need to split large models into multiple parts and glue them together. As an open-frame bed-slinger, it is designed for PLA, PETG, and TPU rather than high-temperature engineering materials. Its 80°C maximum bed temperature is a deliberate choice for the larger format: heating a bed this size to higher temperatures would draw excessive power, and none of its intended materials require it. For ABS, ASA, or engineering filaments, an enclosed or active-chamber machine is the right tool.\u003c\/p\u003e\n\n\u003ch2\u003eServo Extruder and Vibration Control\u003c\/h2\u003e\n\u003cp\u003eThe A2L uses a PMSM closed-loop servo extruder that monitors extrusion in real time and detects filament runout, tangles, air printing, and nozzle clumping before they ruin a print — the same extrusion technology found in the X2D. Its adaptive vibration compensation actively corrects ringing and ghosting as a print grows taller, which matters on a large open-frame machine where tall prints are more prone to wobble. Fully automatic bed levelling, Z-offset, and flow dynamics calibration deliver hands-free first layers.\u003c\/p\u003e\n\n\u003ch2\u003eThe Multi-Tool Ecosystem: Cutting and Drawing\u003c\/h2\u003e\n\u003cp\u003eThe A2L offers a capability no other Bambu Lab printer has: optional modules that swap onto the toolhead to turn the machine into a precision blade cutter or pen plotter. The cutting module handles vinyl, paper, fabric, and thin leather; the pen module draws and writes — Cricut-style craft work on a machine that also 3D prints. For a craft room, classroom, or small personalisation business, this dual capability adds real value. Note the A2L does not support laser modules, a safety decision tied to its open-frame design.\u003c\/p\u003e\n\n\u003ch2\u003eMulti-Colour with AMS Lite\u003c\/h2\u003e\n\u003cp\u003eThe A2L is compatible with Bambu Lab's AMS Lite for multi-colour and multi-material printing — up to 4 colours in a single print. The AMS Lite feeds four spools automatically from an external rack, ideal for colour-coded models, multi-material parts, and detailed artistic pieces. AMS Lite\/Combo versions include the AMS unit; the standalone A2L can have it added later.\u003c\/p\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMakers printing large props, cosplay armour, and full-scale wearable accessories in one piece\u003c\/li\u003e\n\u003cli\u003eDesigners and small businesses doing large-scale prototyping or batch production in PLA and PETG\u003c\/li\u003e\n\u003cli\u003eCraft and personalisation work combining 3D printing with vinyl cutting and pen plotting\u003c\/li\u003e\n\u003cli\u003eSTEM educators and makerspaces wanting a versatile, multi-tool machine\u003c\/li\u003e\n\u003cli\u003eAnyone who has outgrown a standard-size printer but does not need an enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab A2L 3D printer\u003c\/li\u003e\n\u003cli\u003eTextured PEI build plate\u003c\/li\u003e\n\u003cli\u003eSpool holder\u003c\/li\u003e\n\u003cli\u003eTool box with maintenance accessories\u003c\/li\u003e\n\u003cli\u003eQuick start guide\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eAMS Lite included with A2L Combo versions\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints sells genuine, 100% original Bambu Lab printers, shipped from Cantabria, Spain. Available as the standalone A2L or the A2L Combo with AMS Lite. EU warranty and support included. Looking for a smaller open-frame option? See the \u003ca href=\"\/en-us\/products\/bambu-lab-a1\" title=\"Bambu lab a1 , open-frame 3d printer | eolas prints\" aria-label=\"Bambu lab a1 , open-frame 3d printer | eolas prints\"\u003eBambu Lab A1\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"A2L Combo","offer_id":54054210011463,"sku":"BLB-A2L-C-3D-PRN","price":589.0,"currency_code":"EUR","in_stock":true},{"title":"A2L","offer_id":54054210044231,"sku":"BLB-A2L-3D-PRN","price":479.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/bambu-lab-a2l-silver-black-desktop-614.webp?v=1780330482"},{"product_id":"flashforge-creator-5-high-speed-multi-colour-3d-printer","title":"Flashforge Creator 5 High-Speed Multi-Colour 3D Printer","description":"\u003cp\u003e\u003cb\u003eHigh-Speed, Zero-Waste Multi-Colour 3D Printing for Innovators\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Flashforge Creator 5 is a next-generation FDM 3D printer engineered to completely transform how multi-material and multi-colour models are made. Featuring a revolutionary FlashSwap system of four independent toolheads, it completely eliminates purge waste and speeds up multi-colour printing by up to 500%. Combined with extreme 600 mm\/s travel speeds, fully automatic calibration, and a versatile 256 × 256 × 256 mm build volume, the Creator 5 delivers a seamless, highly efficient workflow for rapid prototyping and batch production.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e4 Independent Toolheads (FlashSwap):\u003c\/b\u003e Print with up to four colours or materials in a single pass with zero purge towers, drastically saving on filament costs and print time. Each toolhead has its own nozzle, extruder, and heater — swapping takes approximately 7 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtreme Speed \u0026amp; Precision:\u003c\/b\u003e Maximum travel speed of 600 mm\/s and acceleration up to 30,000 mm\/s², reducing production times without sacrificing quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFully Automated Calibration:\u003c\/b\u003e Smart sensors handle bed levelling, Z-offset, and dynamic flow control automatically to guarantee flawless first layers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdvanced Material Support:\u003c\/b\u003e Reaching nozzle temperatures of 320°C and bed temperatures of 120°C, it handles PLA, PETG, TPU, PLA-CF, PETG-CF, PET, SILK, PVA, and BVOH. Soluble PVA supports dissolve in water for complex geometries — a key advantage of tool-changing over single-nozzle systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSmart Monitoring:\u003c\/b\u003e Built-in Full HD 1080p camera, filament runout detection, and power loss recovery ensure your prints finish successfully\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMulti-Printer Management:\u003c\/b\u003e Fleet management capabilities over Wi-Fi, USB, and LAN make it effortless to scale up production on a 3D print farm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzle Options:\u003c\/b\u003e Compatible with 0.25 mm, 0.4 mm, 0.6 mm, and 0.8 mm hardened steel nozzles for different detail and speed requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePerfect For\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEducational labs and makerspaces\u003c\/li\u003e\n\u003cli\u003e3D print farms and small batch manufacturing\u003c\/li\u003e\n\u003cli\u003eDetailed multi-colour prototyping\u003c\/li\u003e\n\u003cli\u003eCosplay and scale model creation\u003c\/li\u003e\n\u003cli\u003eUsers looking to eliminate filament purge waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat's in the Box\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlashforge Creator 5 3D Printer\u003c\/li\u003e\n\u003cli\u003eTextured Flexible PEI Build Plate\u003c\/li\u003e\n\u003cli\u003ePower Cable \u0026amp; Accessories Kit\u003c\/li\u003e\n\u003cli\u003eQuick Start Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed engineering materials or a controlled printing environment? See the \u003cb\u003eFlashforge Creator 5 Pro\u003c\/b\u003e — the enclosed version with active 65°C chamber heating, HEPA 13 filtration, and full support for ABS, ASA, PC, and Nylon. Note: the Creator 5 cannot be upgraded to the Pro as they have structural differences.\u003c\/p\u003e\n\u003cp\u003eMaximise your creative output and eliminate filament waste with the Flashforge Creator 5 — multi-colour printing, redefined for efficiency.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":54099365560647,"sku":"FLF-CR5-3D-PRN","price":899.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-creator-5-high-speed-multi-colour-3d-printer-gray-981.webp?v=1780841299"},{"product_id":"flashforge-creator-5-pro-enclosed-industrial-3d-printer","title":"Flashforge Creator 5 Pro Enclosed Industrial 3D Printer","description":"\u003cp\u003e\u003cb\u003eProfessional Enclosed Multi-Colour 3D Printing for Industrial Applications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Flashforge Creator 5 Pro takes the groundbreaking zero-waste, four-toolhead FlashSwap technology of the Creator 5 and houses it in a fully enclosed, industrial-grade chassis. Designed for engineering and advanced manufacturing, the Pro model features active chamber heating up to 65°C and an advanced HEPA 13 dual-filtration system. This ensures flawless dimensional accuracy and zero warping when printing demanding, high-performance materials like ABS, ASA, PC, and Nylon (PA), while maintaining a safe and fume-free workspace.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eActive Chamber Heating:\u003c\/b\u003e Rapidly heats and maintains the enclosed chamber up to 65°C, preventing warping and layer splitting in advanced engineering materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e4 Independent Toolheads (FlashSwap):\u003c\/b\u003e Zero purge waste and up to 500% faster multi-colour and multi-material printing — each toolhead swaps in approximately 7 seconds with its own nozzle, extruder, and heater\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTop-Tier Air Filtration:\u003c\/b\u003e A medical-grade HEPA 13 filter combined with activated coconut carbon eliminates ultra-fine particles (UFPs) and VOCs for safe indoor use\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-Speed Performance:\u003c\/b\u003e Highly rigid CoreXY structure achieving 600 mm\/s travel speeds and 30,000 mm\/s² acceleration for rapid part delivery\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIntelligent Auto-Calibration:\u003c\/b\u003e Fully automated multi-toolhead offset calibration and auto-levelling for perfectly aligned, hands-free printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUnmatched Material Range:\u003c\/b\u003e Safely print high-strength filaments including ABS, ASA, PC, PA, PC-ABS, PPS-CF, PAHT-CF, PPA-CF, and carbon fibre (CF) composite variants\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSafety \u0026amp; Control:\u003c\/b\u003e Door-open detection automatically pauses the print; built-in HD camera provides remote monitoring via fleet management software\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzle Options:\u003c\/b\u003e Compatible with 0.25 mm, 0.4 mm, 0.6 mm, and 0.8 mm hardened steel nozzles for different detail and speed requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePerfect For\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineering design and functional prototyping\u003c\/li\u003e\n\u003cli\u003eIndustrial parts manufacturing and jigs\u003c\/li\u003e\n\u003cli\u003eAerospace and automotive applications\u003c\/li\u003e\n\u003cli\u003eProfessional 3D print farms\u003c\/li\u003e\n\u003cli\u003eEnvironments requiring strict safety and air quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat's in the Box\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlashforge Creator 5 Pro 3D Printer\u003c\/li\u003e\n\u003cli\u003eTextured Flexible PEI Build Plate\u003c\/li\u003e\n\u003cli\u003ePower Cable \u0026amp; Tool Kit\u003c\/li\u003e\n\u003cli\u003eHEPA \u0026amp; Carbon Filters (Pre-installed)\u003c\/li\u003e\n\u003cli\u003eQuick Start Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor open-frame multi-colour printing with PLA, PETG, and TPU at a lower entry price, see the \u003cb\u003eFlashforge Creator 5\u003c\/b\u003e. Note: the Creator 5 Pro cannot be downgraded to the standard Creator 5 — they have structural differences and are sold separately.\u003c\/p\u003e\n\u003cp\u003eTake industrial 3D printing to the next level with the Flashforge Creator 5 Pro — where professional enclosed reliability meets zero-waste multi-material innovation.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":54099512230215,"sku":"FLF-CR5-P-3D-PRN","price":1049.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/flashforge-creator-5-pro-enclosed-industrial-3d-printer-silver-black-855.webp?v=1780841533"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/collections\/bambu-lab-p2s-combo-gray-3d-printer-476.webp?v=1781954088","url":"https:\/\/eolasprints.com\/en-ch\/collections\/multicolor-multi-material-3d-printers.oembed","provider":"Eolas Prints","version":"1.0","type":"link"}