{"product_id":"original-prusa-sl1s-speed-3d-printer-cw1s-bundle","title":"Original Prusa SL1S SPEED + CW1S Bundle – MSLA Resin 3D Printer","description":"\u003cp\u003eThe \u003cstrong\u003eOriginal Prusa SL1S SPEED + CW1S Bundle\u003c\/strong\u003e is a complete MSLA (Masked Stereolithography) resin printing solution from Prusa Research — the fastest desktop SLA printer Prusa has built, paired with the CW1S all-in-one wash, dry and cure station for a clean, end-to-end resin workflow. Where FDM printers deposit material point by point, the SL1S cures an entire layer at once through a high-resolution monochrome LCD and a powerful 405 nm UV LED array, reaching exposure times as low as 1.3 seconds per layer and capturing fine detail far below what filament can reproduce. It is a proven choice for jewellery casting, dental and medical models, miniatures, and high-fidelity engineering prototypes.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eMSLA — Masked Stereolithography (resin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e5.96\" monochrome LCD, 2560×1620 px, with high-performance lens system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight source\u003c\/td\u003e\n\u003ctd\u003e405 nm UV LED array\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY resolution\u003c\/td\u003e\n\u003ctd\u003e0.049 mm (49 µm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e127 × 80 × 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer heights\u003c\/td\u003e\n\u003ctd\u003e0.025–0.1 mm (minimum 0.01 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer exposure\u003c\/td\u003e\n\u003ctd\u003e1.3–2.4 s depending on material and layer height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt cycle\u003c\/td\u003e\n\u003ctd\u003e3 seconds — motorised tilting resin tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLCD lifespan\u003c\/td\u003e\n\u003ctd\u003e2000 hours (display warranty)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eOpen system — any 405 nm UV resin, incl. certified industrial \u0026amp; castable resins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eUSB, Wi-Fi, LAN — Prusa Connect \u0026amp; PrusaLink remote control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-processing\u003c\/td\u003e\n\u003ctd\u003eIncluded CW1S — 4-in-1 wash, dry, cure \u0026amp; resin pre-heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBundle contents\u003c\/td\u003e\n\u003ctd\u003eSL1S SPEED printer, CW1S station, 0.5 kg Prusament Resin, tools \u0026amp; PrusaSlicer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy MSLA Resin Instead of FDM\u003c\/h2\u003e\n\u003cp\u003eMSLA printers cure each layer as a single image across the full build area at once, so layer time is independent of how many objects sit on the platform — a full plate of jewellery or dental models takes the same time per layer as a single part. The achievable resolution is also fundamentally higher than FDM: features below 0.1 mm that filament cannot reproduce are routine in resin. The trade-off is material handling — resins require washing, curing and safe disposal — which is exactly what the bundled CW1S is built to manage with minimal mess.\u003c\/p\u003e\n\n\u003ch2\u003eThe Tilting Resin Tank\u003c\/h2\u003e\n\u003cp\u003eThe motorised tilting tank is the SL1S SPEED's defining feature. After each layer is cured, the display and vat tilt downward before the platform rises. This lowers peel forces so prints are far less likely to detach mid-job, stirs and evenly redistributes resin under the platform, and — most importantly — cuts the separation cycle to just 3 seconds. The result is up to 3× faster printing than non-tilting machines, with a 150 mm-tall model achievable in around three hours.\u003c\/p\u003e\n\n\u003ch2\u003eCertified for Industrial \u0026amp; Castable Resins\u003c\/h2\u003e\n\u003cp\u003eThe SL1S SPEED is an open-material system: no proprietary vats, resins or FEP films, so you can source consumables anywhere. Prusa has certified the complete print-wash-cure workflow for a wide range of professional resins, including collaborations with industry leaders such as Henkel Loctite. Short exposure times let industrial resins that would otherwise need 20–30 seconds per layer cure in just a few seconds, opening the door to engineering, dental and medical applications — and its sharp detail has made it a long-standing favourite for casting jewellery from Bluecast and other castable resins.\u003c\/p\u003e\n\n\u003ch2\u003eThe CW1S Wash \u0026amp; Cure Station\u003c\/h2\u003e\n\u003cp\u003eThe included Original Prusa CW1S is a 4-in-1 post-processing unit that turns the otherwise messy resin workflow into a few button presses:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash\u003c\/strong\u003e — a stainless-steel IPA tank with a magnetic propeller creates a gentle vortex that reaches every part of the model, more delicate than ultrasonic cleaning and ideal for fine detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry\u003c\/strong\u003e — warm-air drying (up to 60 °C) removes solvent before curing to avoid resin-residue staining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure\u003c\/strong\u003e — four UV LED strips cure parts uniformly to their final mechanical and surface properties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResin pre-heat\u003c\/strong\u003e — brings resin to its ideal printing temperature and viscosity for consistent results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn IR sensor detects the wash container and presents only the relevant functions, and the unit is more compact than the printer itself — saving bench space in the workshop or lab.\u003c\/p\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eJewellers and casters producing master patterns in castable resins\u003c\/li\u003e\n\u003cli\u003eDental laboratories printing models, splints and surgical guides in certified resins\u003c\/li\u003e\n\u003cli\u003eDesign studios and miniature makers needing the highest surface detail\u003c\/li\u003e\n\u003cli\u003eEngineering teams producing high-fidelity functional prototypes and small-batch parts\u003c\/li\u003e\n\u003cli\u003eWorkshops and labs that want a clean, certified, end-to-end resin workflow out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eThis bundle ships as \u003cstrong\u003etwo separate boxes\u003c\/strong\u003e (SL1S SPEED printer and CW1S station) via UPS. Both are dispatched together; please ensure someone is available to receive two parcels.\u003c\/p\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an official Prusa Research reseller based in Cantabria, Spain, supporting professional 3D printing customers across Europe. EU 24-month warranty included (12 months for businesses and non-EU customers; the exposure LCD and FEP film are wear components as defined by Prusa). Ships from within the EU — no customs surprises for EU orders. Contact us to discuss resin compatibility for your application before ordering.\u003c\/p\u003e\n","brand":"Prusa Research","offers":[{"title":"Default Title","offer_id":51475011928391,"sku":"PRU-SLS-CW1-3D-PRN","price":2577.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/original-prusa-sl1s-speed-cw1s-bundle-msla-resin-3d-printer-black-253.webp?v=1782720141","url":"https:\/\/eolasprints.com\/en-at\/products\/original-prusa-sl1s-speed-3d-printer-cw1s-bundle","provider":"Eolas Prints","version":"1.0","type":"link"}