{"product_id":"bambu-lab-x2d","title":"Bambu Lab X2D","description":"\u003cp\u003eThe Bambu Lab X2D is a dual-nozzle enclosed FDM 3D printer designed for users who regularly print with support materials, multi-material combinations, or engineering filaments. Where most desktop printers rely on a single nozzle for both the part and its supports — requiring the same material for both, which limits clean removal — the X2D dedicates one nozzle to the part and a second to the support structure. This changes the quality ceiling on complex geometry: supports in PVA, BVOH, or HIPS dissolve or peel cleanly away from surfaces that would otherwise require manual work and leave marks.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"width:100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint technology\u003c\/td\u003e\n\u003ctd\u003eFDM \/ FFF — CoreXY, fully enclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume\u003c\/td\u003e\n\u003ctd\u003e330 × 330 × 320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd\u003e300°C (per nozzle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax chamber temperature\u003c\/td\u003e\n\u003ctd\u003e65°C (active heating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle system\u003c\/td\u003e\n\u003ctd\u003eDual nozzle — independent main + auxiliary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed surface\u003c\/td\u003e\n\u003ctd\u003eTextured PEI build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003e3-stage — G3 pre-filter + H12 HEPA + activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensors\u003c\/td\u003e\n\u003ctd\u003e31 across the system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eBelow 50 dB (typical conditions, active motor noise cancelling)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMonitoring\u003c\/td\u003e\n\u003ctd\u003eAI camera — start checks and in-print failure detection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, LAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariants\u003c\/td\u003e\n\u003ctd\u003eX2D (printer only) \/ X2D AMS Combo (includes AMS 2 Pro)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDual Nozzle — How It Changes Support Printing\u003c\/h2\u003e\n\u003cp\u003eA single-nozzle multi-material setup switches filaments within the same nozzle — meaning both the part material and the support material pass through the same hotend and require purging between transitions. The X2D's dual-nozzle architecture keeps the two materials completely separate: the main nozzle never touches the support filament and vice versa. This eliminates cross-contamination between part and support, reduces purge waste per transition, and allows the two materials to be processed at different temperatures simultaneously — which is essential for pairing materials with very different thermal requirements, such as PETG with BVOH supports or ABS with HIPS.\u003c\/p\u003e\n\n\u003ch2\u003e65°C Active Chamber Heating\u003c\/h2\u003e\n\u003cp\u003eThe actively heated chamber reaches and maintains 65°C throughout the print. For engineering materials — ABS, ASA, PA-CF, and PC in particular — this addresses the root cause of warping and delamination: the temperature gradient between a hot first layer and a cooling ambient environment. At 65°C chamber temperature, even large-format ABS and ASA prints maintain dimensional stability from first layer to last. The X2D's 330×330×320 mm build volume makes this particularly relevant — large flat ABS parts are notoriously prone to warping on smaller or less thermally stable machines.\u003c\/p\u003e\n\n\u003ch2\u003e300°C Nozzle — Material Range\u003c\/h2\u003e\n\u003cp\u003eThe 300°C nozzle ceiling covers the complete range of common engineering thermoplastics from both nozzles: PLA, PETG, ABS, ASA, PA-12 Nylon, PA-CF, PC Blend, and TPU. Soluble support materials including PVA and BVOH also operate within this range. For the most demanding materials (PEEK, PEI), 300°C is at the lower boundary — but for the vast majority of functional engineering part production, it is sufficient.\u003c\/p\u003e\n\n\u003ch2\u003e3-Stage Filtration\u003c\/h2\u003e\n\u003cp\u003eThe X2D's filtration system captures airborne particles and VOCs at three stages: a G3 pre-filter removes larger particles first, the H12 HEPA layer captures fine particulate matter down to 0.3 microns at 99.5% efficiency, and the activated carbon stage adsorbs VOCs and odours from ABS, ASA, and Nylon printing. This system makes the X2D appropriate for office environments, shared workspaces, and facilities with indoor air quality requirements.\u003c\/p\u003e\n\n\u003ch2\u003eAMS Combo — Automatic Material System\u003c\/h2\u003e\n\u003cp\u003eThe X2D AMS Combo variant includes the AMS 2 Pro multi-material unit. The AMS 2 Pro holds up to 4 filament spools and feeds them to the printer automatically, enabling multi-colour and multi-material jobs from a single filament loading operation. Combined with the X2D's dual nozzle, the AMS Combo is the most complete multi-material configuration: the AMS handles filament switching on the main nozzle while the auxiliary nozzle maintains the support material — allowing complex multi-colour prints with dedicated, cleanly removable supports.\u003c\/p\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEngineers and product designers who print functional parts in ABS, ASA, Nylon, or PC requiring clean support interfaces and large build volume\u003c\/li\u003e\n\u003cli\u003ePrototyping studios that regularly produce complex geometry requiring soluble or break-away support material\u003c\/li\u003e\n\u003cli\u003eProfessionals who want multi-material printing capability — including PLA + TPU flexible-rigid combinations — without the compromises of single-nozzle purging\u003c\/li\u003e\n\u003cli\u003eOffice and studio environments needing an enclosed, filtered machine for engineering filaments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab X2D printer\u003c\/li\u003e\n\u003cli\u003eTextured PEI build plate\u003c\/li\u003e\n\u003cli\u003eAccessories box\u003c\/li\u003e\n\u003cli\u003eSpool holder\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eAMS 2 Pro included with X2D AMS Combo variant\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable from Eolas Prints\u003c\/h2\u003e\n\u003cp\u003eEolas Prints is an authorised Bambu Lab reseller based in Cantabria, Spain. Available as X2D (printer only) or X2D AMS Combo. EU warranty and support included.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"AMS Combo","offer_id":53703408222535,"sku":"BLB-X2D-C-3D-PRN","price":1121.0,"currency_code":"USD","in_stock":true},{"title":"X2D","offer_id":53703408255303,"sku":"BLB-X2D-3D-PRN","price":841.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1852\/8259\/files\/bambu-lab-x2d-black-3d-933.webp?v=1776183620","url":"https:\/\/eolasprints.com\/en-ar\/products\/bambu-lab-x2d","provider":"Eolas Prints","version":"1.0","type":"link"}